http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Carrier Sensing for OFDMA-Based D2D Group-Casting Systems
Rim, Minjoong,Kang, Chung G. IEEE 2017 IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY Vol.66 No.3
<P>Device-to-device (D2D) communications refer to direct communications between two or more devices without transferring data through the base station or other infrastructure. For synchronous D2D communication systems in most recent researches and development, orthogonal frequency-division multiple access (OFDMA) or single-carrier frequency-division multiple access (SC-FDMA) is considered to increase the communication coverage and to maintain the similarity with the cellular communication systems. One important design consideration for OFDMA-based (or SC-FDMA-based) D2D communication systems, particularly in an ad-hoc network mode, is the in-band emission effect, which corresponds to the mutual interference between different signals over other subchannels in the same time slot. To avoid interference from other transmitters or to other receivers, a transmittermay perform carrier sensing, which allows for transmission only when the measured interference is below the given threshold. Since the characteristics of the performance degradation due to other-channel interference (OCI) can be quite different from those by cochannel interference (CCI), the interference measurement must be carefully considered for carrier sensing in OFDMA-based D2D communication systems. This paper discusses physical carrier sensing for interference management in D2D group-casting or broadcasting systems and proposes a mechanism that efficiently avoids the interference from other subchannels. More specifically, outage probability is derived by taking both OCI and CCI into account and is then employed as a reference for the carrier sensing level in the course of selecting the resource blocks (RBs) for D2D communication. We demonstrate that our proposed carrier sensing scheme can significantly increase the areal capacity subject to the given target outage performance.</P>
OFDM 및 SC-FDE 시스템에서의 다이버시티 기술과 채널부호화율의 상관관계
임민중(Minjoong Rim) 대한전자공학회 2008 電子工學會論文誌-TC (Telecommunications) Vol.45 No.11
이 논문에서는 OFDM 및 SC-FDE 시스템에서 다이버시티 기술의 적용이 채널부호화율에 미치는 상관관계에 대해서 살펴본다. OFDM 시스템에서는 채널의 다중경로 프로파일에 따라서 적절한 채널부호화율의 결정이 필요하며 순환지연 다이버시티 기술을 적용하는 경우가 시공간 부호화 기술을 적용하는 경우보다 더 낮은 채널부호화율을 필요로 한다. 이에 반해서 OFDM에 DFT 확산을 적용한 SC-FDE 시스템에서는 낮은 채널부호화율을 적용할 필요성이 없으며 다이버시티 기술의 적용과 상관없이 상대적으로 높은 채널부호화율이 사용될 수 있다. This paper addresses relationships between diversity techniques and channel coding rates for OFDM and SC-FDE systems. In OFDM systems it is important to select proper channel coding rates according to multi-path channel profiles and low channel coding rates are required with cyclic delay diversity compared to the case of space time coding. On the other hand, it is not necessary to use low channel coding rates for SC-FDE systems where DFT spreading is applied to OFDM and relatively high channel coding rates can be used regardless of diversity techniques.
분산할당 SC-FDMA 시스템에서의 순환지연 다이버시티의 적용
임민중(Minjoong Rim) 대한전자공학회 2008 電子工學會論文誌-TC (Telecommunications) Vol.45 No.12
분산할당 OFDMA 시스템에서 순환지연 다이버시티를 적용하면 주파수 다이버시티의 증가로 인해 성능의 증대를 가져온다. 그러나 분산할당 SC-FDMA 시스템에 순환지연 다이버시티를 적용하는 것은 주파수 다이버시티의 증가로 인한 성능증대 효과와 주파수 선택적 채널로 인한 성능감소 효과를 동시에 가져온다. 본 논문에서는 이 상반되는 두 가지 효과에 대해서 논하며 분산할당 SC-FDMA 시스템에서 순환지연 다이버시티를 적용하는 것이 언제 유리하고 언제 불리한지 논의한다. In distributed-allocation OFDMA systems, cyclic delay diversity can improve the system performance by increasing frequency diversity. However, applying cyclic delay diversity to distributed-allocation SC-FDMA systems can affect the performance in two contrary ways: positive effect due to increased frequency diversity and negative effect caused by increased frequency selective channels. This paper addresses these two contrary effects and discusses about when cyclic delay diversity is useful and when it is not very useful for distributed-allocation SC-FDMA systems
블록호핑 SC-FDMA 시스템을 위한 순환지연 다이버시티의 지연값 결정
임민중(Minjoong Rim) 대한전자공학회 2009 電子工學會論文誌-TC (Telecommunications) Vol.46 No.1
OFDMA 시스템에서는 순환지연 다이버시티는 다이버시티 효과에 의해서 시스템 성능을 증대시킨다. 그러나 블록호핑 SC-FDMA 시스템에서 순환지연 다이버시티의 적용은 다이버시티 효과에 의한 성능 증대효과와, 채널이 주파수 선택적이 됨으로 인한 성능의 감소효과가 동시에 발생한다. 따라서 시스템 성능을 최대화하기 위해서는 순환지연 다이버시티의 지연값을 적절히 선택하는 것이 필요하다. 이 논문에서는 이 두 가지 상반되는 효과와 블록호핑 SC-FDMA 시스템에서 순환지연 다이버시티를 적용할 때 순환지연값을 결정하는 방법에 대해 논의한다. In OFDMA systems, cyclic delay diversity can improve the system performance due to diversity effects. However, applying cyclic delay diversity to block-hopping SC-FDMA systems can affect the performance in two contrary ways: positive effect due to increased frequency diversity and negative effect caused by increased frequency selectivity. Hence, the delay value for cyclic delay diversity should be carefully selected to maximize the system performance. This paper discusses these two contrary effects and proposes a method of determining the delay value of cyclic delay diversity for block-hopping SC-FDMA systems.