The use of auxiliary devices during irrigation to increase the cleaning ability of a chelating agent

Prado, Marina Carvalho,Leal, Fernanda,Simao, Renata Antoun,Gusman, Heloisa,do Prado, Maira The Korean Academy of Conservative Dentistry 2017 Restorative Dentistry & Endodontics Vol.42 No.2

Objectives: This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos $Odontol\acute{o}gicos$) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated. Materials and Methods: Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05). Results: There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05). Conclusions: QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.

Chemical and Fatty Acid Composition of Longissimus Muscle of Crossbred Bulls Finished in Feedlot

do Prado, Ivanor Nunes,de Oliveira, Adriana Nery,Pizzi Rotta, Polyana,Perotto, Daniel,do Prado, Rodolpho Martin,Silva, Roberio Rodrigues,de Souza, Nilson Evelazio,Moletta, Jose Luiz Asian Australasian Association of Animal Productio 2009 Animal Bioscience Vol.22 No.7

This work was carried out to study the chemical and fatty acid composition of Longissimus muscle (LM) of crossbred young bulls finished in a feedlot. After weaning (at 8 months old), the bulls were kept in a feedlot for 180 days. The bulls were kept in individual pens and fed (twice daily) with corn silage, soybean hulls, cracked corn, limestone, urea and mineral salt. The bulls were slaughtered with a final weight of 464 kg. Forty bulls were used: 10 Caracu (CAR), 10 Canchim (CAN), 10 Caracu vs. Charolais (CCH) and 10 Canchim vs. Aberdeen Angus (CAA). The percentages of moisture, ash, crude protein, total lipids, as well as the fatty acid composition, were measured in the LM. The moisture percentage was lower (p<0.05) for bulls from CAA genetic group (71.2%) in comparison to bulls from CAR (74.2%), CAN (74.9%) and CCH (74.7%) genetic groups. On the other hand, there was no difference (p>0.05) among bulls from CAR, CAN and CCH genetic groups. Ash percentage was lower (p<0.05) for CAR bulls (0.96%) in comparison with the other genetic groups. There was no difference (p>0.05) among CAN, CCH and CAA genetic groups. Similarly, there was no difference (p>0.05) in crude protein among the different genetic groups. Total lipids percentage was higher (p<0.05) for CAA bulls (5.35%) and lower (p<0.05) for CAN (1.85%) and CCH (1.41%) genetic groups. Genetic group has little effect on the fatty acid composition of Longissimus muscle of bulls. However, CLA (C 18:2 c-9 t-11) percentage was higher (p<0.05) for CAR (0.33%) and CCH (0.37%) in comparison to CAN (0.27%) and CAA (0.29%) genetic groups. Saturated, monounsaturated and polyunsaturated fatty acids, n-6 and n-3 percentages did not differ (p>0.05) among genetic groups. PUFA/SFA ratio ranged from 0.10 to 0.15, with no difference (p>0.05) among genetic groups. Similarly, n-6/n-3 ratio ranged from 12.6 to 16.3, without difference (p>0.05) among genetic groups.

Carcass Characteristics, Chemical Composition and Fatty Acid Profile of the Longissimus Muscle of Bulls (Bos taurus indicus vs. Bos taurus taurus) Finished in Pasture Systems

do Prado, Ivanor Nunes,Aricetti, Juliana Aparecida,Rotta, Polyana Pizzi,do Prado, Rodolpho Martin,Perotto, Daniel,Visentainer, Jesui Vergilio,Matsushita, Makoto Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.10

This experiment was carried out to evaluate the carcass characteristics, chemical composition and fatty acid profile of the Longissimus muscle (LM) of three cattle genetic groups (Purunã, PUR, 11; 1/2 Purunã vs. 1/2 British, PUB, 6 and 1/2 Charolais vs. 1/2 Caracu, CHC, 10) finished in pasture systems. The field work took place at the Lapa Research Farm of the Agronomic Institute of Paraná, in the city of Lapa, south Brazil. The animals were fed during the winter with corn silage, cottonseed meal, cracked corn, urea, limestone and mineral salts as sources of protein, as well as an energy supplement, in pasture systems of Brachiaria decumbens Stapf. The animal groups were slaughtered at 20 months of age, at 50122.6 kg live weight. CHC bulls had higher (p<0.05) final weight than PUR and PUB bulls. Hot carcass weight was similar (p>0.10) between PUR and PUB. Hot carcass dressing percentage was higher (p<0.05) for PUB bulls than for PUR and CHC bulls. On the other hand, hot carcass dressing percentage was similar (p>0.05) between PUR and CHC bulls. Fat thickness was similar (p>0.10) among all genetic groups. However, the Longissimus area of CHC bulls was greater (p<0.05) than in PUR and PUB genetic groups. The genetic groups did not affect (p>0.10) the marbling of Longissimus. There was no observed difference (p>0.10) in moisture, ash, crude protein and total cholesterol contents among the three genetic groups. On the other hand, the total lipid percentage was higher (p<0.05) for the PUB genetic group in comparison with PUR and CHC. CLA percentage was highest for PUR animals. However, total CLA amounts were not altered by the different genetic groups.

The use of auxiliary devices during irrigation to increase the cleaning ability of a chelating agent

Marina Carvalho Prado,Renata Antoun Simão,Fernanda Leal,Heloisa Gusman,Maíra do Prado 대한치과보존학회 2017 Restorative Dentistry & Endodontics Vol.42 No.2

Objectives: This study investigated the cleaning ability of ultrasonically activated irrigation (UAI) and a novel activation system with reciprocating motion (EC, EasyClean, Easy Equipamentos Odontológicos) when used with a relatively new chelating agent (QMix, Dentsply). In addition, the effect of QMix solution when used for a shorter (1 minute) and a longer application time (3 minutes) was investigated. Materials and Methods: Fifty permanent human teeth were prepared with K3 rotary system and 6% sodium hypochlorite. Samples were randomly assigned to five groups (n = 10) according to the final irrigation protocol: G1, negative control (distilled water); G2, positive control (QMix 1 minute); G3, QMix 1 minute/UAI; G4, QMix 1 minute/EC; G5, QMix 3 minutes. Subsequently the teeth were prepared and three photomicrographs were obtained in each root third of root walls, by scanning electron microscopy. Two blinded and pre-calibrated examiners evaluated the images using a four-category scoring system. Data were statistically analyzed using Kruskal-Wallis and Dunn tests (p < 0.05). Results: There were differences among groups (p < 0.05). UAI showed better cleaning ability than EC (p < 0.05). There were improvements when QMix was used with auxiliary devices in comparison with conventional irrigation (p < 0.05). Conventional irrigation for 3 minutes presented significantly better results than its use for 1 minute (p < 0.05). Conclusions: QMix should be used for 1 minute when it is used with UAI, since this final irrigation protocol showed the best performance and also allowed clinical optimization of this procedure.

Carcass Characteristics and Chemical Composition of the Longissimus Muscle of Puruna and 1/2 Puruna vs. 1/2 Canchin Bulls Meat Quality of Bulls

Nunes do Prado, Ivanor,Rotta, Polyana Pizzi,Martin do Prado, Rodolpho,Visantainer, Jesui Vergilio,Moletta, Jose Luis,Perotto, Daniel Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.9

This work was conducted to study the performance, carcass characteristics, chemical composition and fatty acid profile of the Longissimus muscle (LM) of first-generation Purunã (n = 7, PUR1), second-generation Purunã (n = 9, PUR2), and 1/2 Puruna vs. 1/2 Canchin (n = 13, PUCA) bulls finished in a feedlot. The animals averaged 18 months of age at the beginning of the experiment. The animals were kept in a feedlot from 18 to 22 months of age. They were fed twice a day with corn silage ad libitum, along with soybean meal, cracked corn, urea, limestone and mineral salt. PUR1 bulls had greater (p<0.05) final weight (496.0 kg) than PUCA bulls (449.2 kg). However, there was no difference (p>0.05) between PUR1 and PUR2 (472.0 kg), and between PUR2 and PUCA. Hot carcass weight was similar (p>0.05) among the different genetic groups. Hot carcass dressing percentage was similar (p>0.10) between PUR1 (50.4%) and PUCA (53.8%), and higher (p<0.10) than PUR2 (48.6%). Cushion thickness was greater (p<0.05) in PUCA bulls (27.12 cm). The other parameters were similar (p<0.05) among the three genetic groups. Total lipid and cholesterol contents were higher (p<0.01) in PUR2. Moisture, ash and crude protein contents were similar (p>0.05) among the three genetic groups. Saturated fatty acid (SFA) levels were higher (p<0.10) in PUR1 and PUR2 (51.58% and 50.41%, respectively). Polyunsaturated fatty acid levels were higher (p<0.05) in PUR1 and PUCA (6.50% and 8.29%, respectively). N-6, n-3 and PUFA/SFA ratios were higher (p<0.05) in PUCA. MUFA and n-6/n-3 ratios were similar (p>0.05) among the different genetic groups.

Animal Performance and Carcass Characteristics of Bulls (1/2 Purunã vs 1/2 Canchim) Slaughtered at 16 and 22 Months Old, and Three Different Weights

Prado, Ivanor Nunes Do,Eiras, Carlos Emanuel,Fugita, Carlos Alberto,Passetti, Rodrigo Augusto Cortez,Ornaghi, Mariana Garcia,Rivaroli, Dayane Cristina,Pinto, Adriana Aparecida,Moletta, Jose Luiz Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.5

Current study aimed to evaluate the performance of bulls (1/2 Purun$\tilde{a}$ vs 1/2 Canchim) slaughtered at two ages and three different weights. One hundred and thirteen bulls were divided into two slaughter ages (16 and 22 months) and three different slaughter weights (light, 422 kg; medium, 470 kg; and heavy, 550 kg). The body weight was higher for bulls slaughtered at 16 months. Daily gain, carcass weight and dressing were higher for bulls slaughtered at 16 months. Feed intake was higher for bulls slaughtered at 22 months although feed efficiency was better for bulls slaughtered at 16 months. Carcass characteristics were better for bulls slaughtered at 16 months. The percentages of muscle, fat and bone and meat characteristics were similar between two slaughter ages. Feed intake and animal performance was lower for lighter animals. Feed conversion and carcass dressing were similar in the three slaughter weights. Muscle percentage was higher for heavier animals but fat and bone percentages were lower. Slaughter weight had no effect on meat characteristics.

The Elastic Behaviour of Metal Powder Compacts

Prado J. M.,Riera M. D. 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1

Cylindrical specimens with different levels of density have been submitted to uniaxial compression tests with loading and unloading cycles. The analysis of the elastic loadings shows a non linear elasticity which can be mathematically represented by means of a potential law. Results are explained by assuming that the total elastic strain is the contribution of two terms one deriving from the hertzian deformation of the contacts among particles and another that takes into account the linear elastic deformation of the powder skeleton. A simple model based in an one pore unit cell is presented to support the mathematical model.

Plastic Behaviour of Green Powder Metallurgical Compacts

Prado J. M.,Riera M. D. 한국분말야금학회 2006 한국분말야금학회 학술대회논문집 Vol.2006 No.1

The results of monotonic and cyclic uniaxial compression tests, in which the deviatoric component of the stress is predominant, carried out on green and recrystallized iron compacts with different levels of density are presented and discussed in order to analyse the macro and micro-mechanisms governing the mechanical behaviour of non-sintered PM materials. The plastic deformation of the particles, especially at the contact areas between neighbouring grains, produces an internal friction responsible for the main features observed in the behaviour of green metallic compacts. These results show important discrepancies with the plasticity models, Cam-Clay and Drucker-Prager Cap.

The effects of non-thermal plasma and conventional treatments on the bond strength of fiber posts to resin cement

do Prado, Maira,da Silva, Eduardo Moreira,Marques, Juliana das Neves,Gonzalez, Caroline Brum,Simao, Renata Antoun The Korean Academy of Conservative Dentistry 2017 Restorative Dentistry & Endodontics Vol.42 No.2

Objectives: This study compared the effect of hexamethyldisiloxane (HMDSO) and ammonia ($NH_3$) plasmas on the bond strength of resin cement to fiber posts with conventional treatments. Materials and Methods: Sixty-five fiber posts were divided into 5 groups: Control (no surface treatment); $H_2O_2$ (24% hydrogen peroxide for 1 min); Blasting (blasting with aluminum oxide for 30 sec); $NH_3$ ($NH_3$ plasma treatment for 3 min); HMDSO (HMDSO plasma treatment for 15 min). After the treatments, the Ambar adhesive (FGM Dental Products) was applied to the post surface (n = 10). The fiber post was inserted into a silicon matrix that was filled with the conventional resin cement Allcem Core (FGM). Afterwards, the post/cement specimens were cut into discs and subjected to a push-out bond strength (POBS) test. Additionally, 3 posts in each group were evaluated using scanning electron microscopy. The POBS data were analyzed by one-way analysis of variance and the Tukey's honest significant difference post hoc test (${\alpha}=0.05$). Results: The Blasting and $NH_3$ groups showed the highest POBS values. The HMDSO group showed intermediate POBS values, whereas the Control and $H_2O_2$ groups showed the lowest POBS values. Conclusion: Blasting and $NH_3$ plasma treatments were associated with stronger bonding of the conventional resin cement Allcem to fiber posts, in a procedure in which the Ambar adhesive was used.

Comparison of RULA and Checklist OCRA Ergonomic Risk Methods for Civil Construction

Juliano Prado Stradioto,Ariel Orlei Michaloski,Antonio Augusto de Paula Xavie,Daniela Colombini 대한산업공학회 2020 Industrial Engineeering & Management Systems Vol.19 No.4

The external plastering has a high rate of work accidents and corresponds to a large part of work-related musculoskeletal disorders (WMSD) in construction. The objective of this research was to statistically correlate the RULA and OCRA Checklist ergonomic risk methods, used in external workstations on building facades. The methodological approach consisted of a quantitative and qualitative research, including literature review and field research, including 32 employees, with the project approved by the Institution’s Ethics and Research Committee. This research showed results that indicate the high physical requirements that the activity exerts on workers, a strong and significant statistical correlation between the methods, and that the OCRA checklist method is the best option among those for the ergonomic evaluation. The research showed limitations regarding the amount of ergonomic methods used as well as the difficult access to construction sites. The research leaves the possibility of future studies on the statistical comparison between other ergonomic methods, using a greater number of statistical tools, in addition to analyzing other activities that make up the execution of building work in civil construction.