http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Sutthipoj Sutthana,Kritsada Hongsith,Pipat Ruankham,Duangmanee Wongratanaphisan,Atcharawon Gardchareon,Surachet Phadungdhitidhada,Dheerawan Boonyawan,Pisist Kumnorkaew,Adisorn Tuantranont,Supab Choopu 한국물리학회 2017 Current Applied Physics Vol.17 No.4
An interfacial modification of CH3NH3PbI3/PCBM is investigated by pre-heating PCBM solution before spin-coating on the CH3NH3PbI3layer.By adjusting PCBM concentration, PCBM films were optimized to form homogeneous films. Besides, the pre-heat treatment of PCBM solution exhibits a better covered area over CH3NH3PbI3 layer with reduced pinhole compared with the non-heat treatment. This can be explained by the higher thermal energy PCBM molecules of the pre-heat solution leading to higher molecule mobility that can reorganizes a structural as well as enhance the diffusion and enhance coverage of PCBM films over CH3NH3PbI3. The optimized cell is enhanced with average power conversion efficiency from 4.59% up to 5.76% (6.44% maximum) by heat treatment. To investigate interface between CH3NH3PbI3 and PCBM, the contact angle was measured and found that the contact angle of PCBM films were higher after heat treatment suggesting re-alignment and better orientation of PCBM on perovskite film. The better orientation of PCBM can be explained in term of hydrophilic/hydrophobic property of the interface between CH3NH3PbI3 and PCBM. These results suggest that pre-heat treatment of PCBM solution has ability to modify the interface for better orientation of PCBM and resulting in efficiency enhancement due to better carrier transport direction at the CH3NH3PbI3/PCBM interfaces for perovskite solar cells. In addition, the better orientation that the head (non-polar)is oriented at outer surface can also prevent the solar cells from surrounding moisture.