http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Nabil B. Sada (검색결과 1 건)
- 무료
- 기관 내 무료
- 유료
-
Nabil B. Sada,Mohammed A. Al Nawafleh 대한기계학회 2009 JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY Vol.23 No.8
Round bars of 13.6 mm diameter made from low alloy steel were sprayed by hard-coating Lubrotec 19985 under the following spraying parameters: the rotation speed varied from 500 to 900 rpm, the feeding speed from 0.1 to 1.0 mm/rev, and the nozzle tip distance from 100 to 200 mm; the sprayed bars were then subjected to bending test. Depending on the thickness of the produced coating, the modulus of elasticity and yield bending stress of the coating were calculated by applying the bending deflection formula and an equivalent cross-sectional area technique, respectively. The results obtained indicated that the thickness, hardness, yield bending stress, and modulus of the elasticity of coating were varied with the variation in spraying parameters. The optimum spraying parameter was a rotation speed of 700 r.p.m, a nozzle tip distance of 200 mm, and a feed rate of 0.1 mm/rev. This optimum parameter produced an acceptable thickness of 1.14 mm, a hardness of 148 HV, a bending stress of 404.9 MPa, and a modulus of elasticity of 91.47 GPa. The results obtained can also help determine the modulus of elasticity and yield bending stress of the various coating materials when a coated round bar is subjected to the bending test.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
