파노라마 X선 사진을 이용한 무치악 환자의 방사선학적 연구

문제운,최순철 大韓口腔顎顔面 放射線學會 1992 Imaging Science in Dentistry Vol.22 No.2

The author has examined the abnormalities in panoramic radiographs of 668 edentulous patients. The distribution, type, incidence, and location of all abnomalities were analized, and the distances between alveoar crest and anatomical structures were measures. (Maxillary measurements were performed between alveloar crest and lower margin of the maxillary sinus and mandibular measurements between alveolar crest and upper edge of the mental foramen). The obtained results were as follows ; 1. Of the 668 panoramic radiographs examined, 103(15.4%) showed one or more abnormalities. 2. The incidence of abnormalities was decreased by years, which was 22.0% in 1970's and 16.8% in 1980's and 12.1% in 1990's. 3. The distribution of abnormalities as follows ; 43(40.2%) superficial root fragments, 24(22.4%) impacted teeth, 9(8.4%) imbedded root fragments, 7(6.5%) cysts, 7(6.5%) fractures, 5(4.7%) foreign bodies, 5(4.7%) abnormal radiolucencies, 4(3.7%) abnormal radiopacities, 2(1.9%) bony defects, 1(0.9) tumor. 4. In the location of abnormalities, 42 cases(35.3%) were in the maxillary posterior region, 26 cases(21.8%) were in the maxillary anterior region, 20 cases(24.4%) were in the mandibular posterior region and 18 cases(15.1%) were in the mandibular anterior region. 5. In the distance between alveolar crest and maxillary sinus, 109 cases(9.7%) were below 0.5mm, 757 cases(67.6%) were between 0.5mm and 10mm, 254 cases(22.7%) were above 100mm. In the distance between alveolar crest and mental foramen, 73 cases(8.8%) were below 0.5mm, 501 cases(60.7%) were between 0.5mm and 10mm and 252 cases(30.5) were above 100mm.

다구치법에 의한 고 규소 내산주철의 용해주조공정 최적화

신제식,이상목,문병문,김정철,한동운,백승한 대한금속재료학회 2005 대한금속·재료학회지 Vol.43 No.2

In this study, Taguchi method, one of the design tools of experiments, was applied to optimize casting process parameters of the high silicon corrosion-resistant iron. Three casting process parameters such as melting temperature, rare earth metal (mischmetal) addition, and pouring temperature were chosen. Using SN (signal-to-noise) ratio calculated from ultimate tensile strength of each experimental casting run, the relationship between the casting parameters and mechanical properties was statistically evaluated. The casting condition of a melting temperature of 1,650℃, 0.2% rare earth metal addition, and a pouring temperature of 1,350℃ led to an excellent ultimate tensile strength above 11 kgf/mm², which is beyond the industrial criterion. The effects of the casting parameters on mechanical properties and corrosion resistance were further confirmed by combined analysis of fractography, hydrogen content determination, microscopic test, and acid resistance test. (Received August 23, 2004)

방사선조사 후 유표피암종세포내 칼슘농도의 변화와 apoptosis 발현에 관한 연구

이삼선,문제운,허민석,박태원,유동수,최순철 大韓口腔顎顔面 放射線學會 1999 Imaging Science in Dentistry Vol.29 No.1

Purpose: Ionizing radiations have been reported as an apoptosis initiating stimulus in various cells and it has established that sustained elevations in [Ca²+] can lead to DNA fragmentation by Ca²+-dependent endonucleases, ultimately resulting in apoptotic cell death. The previous experiments have been reported by using primarily thymocytes and lymphocytes and the change of [Ca²+] was measured only by minutes or hours respectively. We need to evaluate [Ca²+] in both several minutes and hours after irradiation of radiation of radiation therapy and verify the apoptotic cells. Materials and Methods: We have measured [Ca²+] in human gingival epitheloid cancer cell with 10 Gy irradiation, at minutely intervals and hourly intervals using digitized video-intensified fluorescence microscopy and the fluorescent Ca²+ indicator dye, fura-2. In order to find out that the transient rise in [Ca²+] could induced apoptosis, cells were incubated for 1 hour at 37℃ with TdT enzyme, rinsed and resuspended containing fluorescence and observed under a confocal fluorescence microscope. MTT assay was done to determine cell activity and LDH assay was done to determine the amount of necrotic cells. Results: After irradiation, the transient and temporal increasing of [Ca²+] in the KB cells was founded. Though, there was no change in the intracellular [Ca²+] at 30 minutes and 2 hours after irradiation. We could detect of DNA fragmented cells at 4 hours after 10 Gy irradiated cells. There were no significant differences between 4 hour, 1 day, 3 day cells. There were no significant differences in MTT and LDH assay between the irradiated group and the control group after 4 hours and 1 day. Though after 3 days there were differences in MTT and LDH assay between the irradiated group was significantly decreased than the control group, in LDH assay the number of necrotic cell death of the irradiated was higher than the control group. Conclusion: In KB cells there were incipient and temporal increasing of the [Ca²+] with 10 Gy irradiation and the apoptosis was founded from 4 hours later which was earlier than seeing of the change of the amount of the cellular ability and necrosis.(J Korean Oral Maxillofac Radiol 1999:29:109-117)

결합조직형성 법랑모세포종의 방사선학적 소견 : 증례보고 3례

최다혜,허경회,문제운,이원진,허민석,이삼선,최순철,박관수 대한구강악안면방사선학회 2006 Imaging Science in Dentistry Vol.37 No.1

Desmoplastic ameloblastoma is a rare histologic variant of ameloblastoma. It shows important differences in anatomic distribution, histologic appearance, and radiographic findings compared with the general type of ameloblastoma. It is histologically characterized by an abundance of densely collagenous stroma and radiographically a mixed radiolucent-radiopaque lesion. We present three cases of desmoplastic ameloblastoma. All the patients complained on buccal swelling with or without pain and the sites of occurrence were the anterior and the premolar region. Plain radiographs showed mixed radiopaque-radiolucent lesion with ill-defined or diffuse sclerotic margin and no external root resorption. Additionally, CT scans revealed buccal expansion and relatively well-defined margin of the lesions. The clinical and radiographic features of the presented cases were compared with those of the desmoplastic ameloblastoma in the previous literatures. (Korean J Oral Maxillofac Radiol 2006; 36 : 63-8)

상악골 침범 소견을 동반한 선천성 침윤 지방종

허경회,이향옥,이서영,최형길,하병각,문제운,이삼선 대한구강악안면방사선학회 2007 Imaging Science in Dentistry Vol.37 No.2

Infiltrating lipoma is a rare mesenchymal neoplasm that, in spite of benign nature, characteristically infiltrates adjacent tissues and tends to recur after surgery. It has a predilection for the extremities and the trunk and is extremely rare in the head and neck region. We present a case of congenital infiltrating lipoma of the face, describing the intrabony invasion and osseous dystrophy as well as the soft tissue changes seen on plain radiographs and magnetic resonance imaging.

자동문을 위한 무선 안전 장치 시스템 및 중앙 통제 소프트웨어 개발

문병현,박종수,최상민,최용운,제정광 대구대학교 정보통신연구소 2004 情報通信硏究 Vol.3 No.2

본 논문에서 고급형 실내 자동문의 설계 및 제작한다. 실내에서 사용되는 특성에 따라 소음이 최소화되어야 하며 미세한 물건이나 어린이의 작은 신체 일부가 자동문에 끼이는 안전사고를 방지하기 위한 안전장치가 필수적이다. 따라서 본 시스템은 IrDA의 적외선 방식과 용량성 센서를 이용한 안전 장치 시스템을 설계하고 자동문을 가정용 컴퓨터를 이용하여 직접제어 하거나 외부에서 이더넷(Ethernet)으로 접속하여 제어 및 표시할 수 있는 프로그램을 개발한다. 또한 지능형 빌딩과 같이 다수의 자동창문을 화재, 강제 환기 및 기타 관리를 위한 중앙 통제 관리 시스템으로 확장된 중앙 통제 소프트웨어를 개발을 하였다. In this paper, the automatic door for indoor use is designed and developed. Since the door is used indoor, the noise should be minimized and the accident that can happen by small object and childrens fingers strapped by the door would be prevented. Thus, Safety module by using infrared is designed and the program that controls the door using ethernet is also developed. For the use of the large intelligent building, the program that can control the multiple doors is also developed.

Uniform Seedling Establishment and Weed Occurrence Inhibition by Seed-Mulching in Wet Seeded Rice

Woon-Ho Yang,Jae-Hyun Kim,Je-Kyu Kim,Hee-Suk Han,Moon-Hee Lee 韓國作物學會 2002 Korean journal of crop science Vol.47 No.2

In spite of simple and cheap cultivation method, water broadcast-seeded rice demonstrates uneven and unstable seedling establishment per unit land area and requires more herbicide and labor-input for weed control. Three experiments were conducted in a phytotron at 18~circC to evaluate the adaptability of seed-mat mulching cultivation technologies in water seeded rice for the uniform seedling establishment and the inhibition of weed occurrence without herbicide application. Five different kinds of mat with different mesh sizes and fabric properties were tested. The emergence of rice was the highest in Lawn-mat treatment, being comparable with the control, in which seeds were sown without mat. The Lawn-mat also exhibited the lowest mat tension. Mat tension may influence the emergence of rice. And once it was soaked in water, it didn't maintain its original shape any more. The emergence rate of rice was the lowest in Safer-mat treatment. In Lawn-mat treatment, which was the most effective for rice emergence in the first study, the differences of emergence and seedling establishment of rice depending on the seeding position (upper, beneath, and between mats) treatments were negligible, while they were higher in dry seeds than in pre-germinated seeds treatment. The emergence as affected by the kinds of mat also showed the same trend when tested using barnyard grass. Depending on the kinds of mat, the inhibition effect of weeds was the greatest in Safer-mat and the poorest in Lawn-mat. These results strongly suggest the possibility that the uniform seedling establishment and weed management without chemical could be achieved simultaneously by seed-mat mulching through the combination of effective mat for the emergence of rice and another efficient mat for the inhibition of weed occurrence. This possibility was also tested in the field.

Uniform Seedling Establishment and Weed Occurrence Inhibition by Seed-Mulching in Wet Seeded Rice

Yang, Woon-Ho,Kim, Jae-Hyun,Kim, Je-Kyu,Han, Hee-Suk,Lee, Moon-Hee The Korean Society of Crop Science 2002 한국작물학회지 Vol.47 No.2

In spite of simple and cheap cultivation method, water broadcast-seeded rice demonstrates uneven and unstable seedling establishment per unit land area and requires more herbicide and labor-input for weed control. Three experiments were conducted in a phytotron at 18$^{\circ}C$ to evaluate the adaptability of seed-mat mulching cultivation technologies in water seeded rice for the uniform seedling establishment and the inhibition of weed occurrence without herbicide application. Five different kinds of mat with different mesh sizes and fabric properties were tested. The emergence of rice was the highest in Lawn-mat treatment, being comparable with the control, in which seeds were sown without mat. The Lawn-mat also exhibited the lowest mat tension. Mat tension may influence the emergence of rice. And once it was soaked in water, it didn't maintain its original shape any more. The emergence rate of rice was the lowest in Safer-mat treatment. In Lawn-mat treatment, which was the most effective for rice emergence in the first study, the differences of emergence and seedling establishment of rice depending on the seeding position (upper, beneath, and between mats) treatments were negligible, while they were higher in dry seeds than in pre-germinated seeds treatment. The emergence as affected by the kinds of mat also showed the same trend when tested using barnyard grass. Depending on the kinds of mat, the inhibition effect of weeds was the greatest in Safer-mat and the poorest in Lawn-mat. These results strongly suggest the possibility that the uniform seedling establishment and weed management without chemical could be achieved simultaneously by seed-mat mulching through the combination of effective mat for the emergence of rice and another efficient mat for the inhibition of weed occurrence. This possibility was also tested in the field.

Enhancing the Directed Self-assembly Kinetics of Block Copolymers Using Binary Solvent Mixtures

Park, Woon Ik,Choi, Young Joong,Yun, Je Moon,Hong, Suck Won,Jung, Yeon Sik,Kim, Kwang Ho American Chemical Society 2015 ACS APPLIED MATERIALS & INTERFACES Vol.7 No.46

<P>The rapid pattern formation of well-ordered block copolymer (BCP) nanostructures is practical for next-generation nanolithography applications. However, there remain critical hurdles to achieve the rapid self-assembly of BCPs with a high Flory–Huggins interaction parameter (χ), owing to their slow kinetics. In this article, we report that a binary solvent vapor annealing methodology can significantly accelerate the self-assembly kinetics of poly(dimethylsiloxane-<I>b</I>-styrene) (PDMS-<I>b</I>-PS) BCPs with a high-χ. In particular, we systemically analyzed the effects of the mixing ratio of a binary solvent composed of a PDMS-selective solvent (heptane) and a PS-selective solvent (toluene), showing an ultrafast self-assembly time (≤1 min) to obtain a well-ordered nanostructure. Moreover, we successfully accomplished extremely fast generation of sub-20 nm dot patterns within an annealing time of 10 s in a 300 nm-wide trench by means of binary solvent annealing. We believe that these results are also applicable to other solvent-based annealing systems of BCPs and that they will contribute to the realization of next-generation ultrafine lithography applications.</P><P>An extremely fast pattern generation (∼10 s) of PDMS-<I>b</I>-PS BCP with sub-20 nm was successfully accomplished by employing a binary solvent of PDMS-preferential (heptane) and PS-preferential (toluene). Furthermore, the use of binary solvent can also induce excellent tunability of the pattern size and period of BCPs.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/aamick/2015/aamick.2015.7.issue-46/acsami.5b08162/production/images/medium/am-2015-081629_0007.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/am5b08162'>ACS Electronic Supporting Info</A></P>

폐 결핵 치료 중 발생한 기관지 Dieulafoy병 1예

김인제,장혜정,정지민,강민정,오지영,최은화,최문영,문진욱,장중현,이진화,한운섭 이화여자대학교 의과학연구소 2006 EMJ (Ewha medical journal) Vol.29 No.2