RISS 검색 - 국내학술지논문

무료
기관 내 무료
유료

내보내기
내책장담기
한글로보기

정확도순

내림차순

내림차순

10개씩 출력

1
Experimental Study of Steel Fiber Concrete Slabs Part I

Ali Ellouze,Mongi Ben Ouezdou,Mohammed Ali Karray 한국콘크리트학회 2010 International Journal of Concrete Structures and M Vol.4 No.2
- 원문보기
This article aims to study the effects of adding steel fibers to concrete on the mechanical behavior of steel fiber concrete (SFC) slabs. After formulating the SFC, an experimental work was, first, conducted on 160 × 320 mm cylindrical specimens and 70 × 70 × 280 mm prisms. Then, this study was carried out on 20 rectangular 1,100 × 1,100 × 60 mm small slabs submitted to a distributed load. Two types of fibers with hooked ends were used: long fibers (LF) of a length of 50 mm and short fibers (SF) of a length of 35 mm. The studied parameters are compressive and tensile strengths and Young"s modulus. Plain concrete (PC) small slabs were also prepared to be compared to the SFC specimens. The results showed that the compressive strength of SFC increased up to 25% while the splitting tests showed an improvement of the SFC reaching 45%. Tests on SFC small slabs also showed that a smaller deflection is obtained with respect to PC, which indicates an improvement in strength (up to 100%), in ductility and in resistance to cracking. The LF gives a better improvement in strength than the SF for a 70% kg/m³ of steel proportioning.
2
Experimental Study of Steel Fiber Concrete Slabs Part I: Behavior under Uniformly Distributed Loads

Ellouze, Ali,Ouezdou, Mongi Ben,Karray, Mohammed Ali Korea Concrete Institute 2010 International Journal of Concrete Structures and M Vol.4 No.2
- 원문보기
This article aims to study the effects of adding steel fibers to concrete on the mechanical behavior of steel fiber concrete (SFC) slabs. After formulating the SFC, an experimental work was, first, conducted on $160\;{\times}\;320$ mm cylindrical specimens and $70\;{\times}\;70\;{\times}\;280$ mm prisms. Then, this study was carried out on 20 rectangular $1,100\;{\times}\;1,100\;{\times}\;60$ mm small slabs submitted to a distributed load. Two types of fibers with hooked ends were used: long fibers (LF) of a length of 50 mm and short fibers (SF) of a length of 35 mm. The studied parameters are compressive and tensile strengths and Young's modulus. Plain concrete (PC) small slabs were also prepared to be compared to the SFC specimens. The results showed that the compressive strength of SFC increased up to 25% while the splitting tests showed an improvement of the SFC reaching 45%. Tests on SFC small slabs also showed that a smaller deflection is obtained with respect to PC, which indicates an improvement in strength (up to 100%), in ductility and in resistance to cracking. The LF gives a better improvement in strength than the SF for a 70% $kg/m^3$ of steel proportioning.