http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Milon Guzmán Juan José (검색결과 1 건)
- 무료
- 기관 내 무료
- 유료
-
Influence of hydrodynamic parameters in plate heat exchangers in ice slurry transport
Jiménez Pacheco Hugo Guillermo,Milon Guzmán Juan José,Miranda Ramos Lilia Mary,Delgado Sarmiento Pavel Kewin,Linares Flores Castro Antonio Erick,Leal Braga Sergio 대한설비공학회 2023 International Journal of Air-Conditioning and Refr Vol.31 No.1
Ice slurry is applied in different refrigeration and air conditioning systems, and among its main advantages is the ability to store latent heat and be pumpable as cold water. This fluid can be used for thermal storage instead of cold water or solid ice, since, at certain concentrations, it can be pumped through heat exchangers. For this technology to be widely used, the equipment must be designed considering the heat exchange characteristics. This study developed an experimental system to study the parameters that influence heat exchange, using ice slurry in a plate heat exchanger and water as a thermal load. Several situations with different flows and initial fractions of ice in ice slurry were analyzed. The input conditions of the thermal load were kept constant, the temperature, the pressure drop and the flow of the ice slurry in the heat exchanger were controlled, according to the Nusselt, Prandtl, and Reynolds coefficients. Results show that the global heat exchange coefficient increases with the increase of the initial ice fraction; the cooling capacity of the heat exchanger increases when ice slurry is used as a fluid. For flow rates greater than 0.16 kg/s and ice fractions above 11%, ice crystals are generated at the heat exchanger outlet, due to the ice slurry’s higher viscosity, at approximately 0.003 Pa at the outlet, since the pressure drop increases as the initial ice fraction increases. Results show ice slurry thermohydraulic behavior. Its use shows favorable characteristics in heat exchange. Ice slurry is applied in different refrigeration and air conditioning systems, and among its main advantages is the ability to store latent heat and be pumpable as cold water. This fluid can be used for thermal storage instead of cold water or solid ice, since, at certain concentrations, it can be pumped through heat exchangers. For this technology to be widely used, the equipment must be designed considering the heat exchange characteristics. This study developed an experimental system to study the parameters that influence heat exchange, using ice slurry in a plate heat exchanger and water as a thermal load. Several situations with different flows and initial fractions of ice in ice slurry were analyzed. The input conditions of the thermal load were kept constant, the temperature, the pressure drop and the flow of the ice slurry in the heat exchanger were controlled, according to the Nusselt , Prandtl , and Reynolds coefficients. Results show that the global heat exchange coefficient increases with the increase of the initial ice fraction; the cooling capacity of the heat exchanger increases when ice slurry is used as a fluid. For flow rates greater than 0.16 kg/s and ice fractions above 11%, ice crystals are generated at the heat exchanger outlet, due to the ice slurry’s higher viscosity, at approximately 0.003 Pa at the outlet, since the pressure drop increases as the initial ice fraction increases. Results show ice slurry thermohydraulic behavior. Its use shows favorable characteristics in heat exchange.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
