http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
손정술 ( Jeong-sul Son ),신승욱 ( Seungwook Shin ),박삼규 ( Sam-gyu Park ) 한국지구물리·물리탐사학회 2021 지구물리와 물리탐사 Vol.24 No.4
복소 전기비저항 탐사기법은 진동수 영역에서 전기비저항과 위상을 측정하여 지하 매질의 다양한 특성정보를 획득할 수 있는 탐사기법으로 최근 그 활용성이 증가하고 있다. 이 논문에서는 복소 전기비저항 탐사기법의 활용성을 높이기 위하여 획득한 자료에 대한 3차원 역산 알고리듬을 개발하였다. 이를 위한 모델링에는 전자기 커플링 효과를 무시하는 경우에 적용할 수 있는 포아송 방정식을 적용하였으며, 역산에는 기존의 평활화된 역산법을 복소수로 확장하는 방법으로 알고리듬을 개발하였다. 역산의 안정성 및 현장자료의 적용성을 높이기 위하여 라그랑지 곱수를 역산 과정에서 오차 벡터와 모델 증분 벡터의 크기에 따라 자동적으로 조정되도록 하는 기법을 도입하였다. 또한, 잡음이 많이 포함된 위상자료로 인한 자료의 손실을 보완하기 위하여 역산반복 단계에서 초반부는 전기비저항 자료만을, 후반부는 전기비저항 자료와 위상 자료를 모두 역산하는 두 단계로 구성된 역산기법을 제시하였다. 수치 모형실험에 대한 역산 시험결과 안정적인 역산 결과를 얻을 수 있었으며, 개발된 3차원 역산 알고리듬을 국내 천열수 광산 인근에서 수행한 복소 전기비저항 탐사자료 해석에 적용하여 그 타당성을 확인하였다. The complex resistivity method is an exploration technique that can obtain various characteristic information of underground media by measuring resistivity and phase in the frequency domain, and its utilization has recently increased. In this paper, a three-dimensional inversion algorithm for the CR data was developed to increase the utilization of this method. The Poisson equation, which can be applied when the electromagnetic coupling effect is ignored, was applied to the modeling, and the inversion algorithm was developed by modifying the existing algorithm by adopting comlex variables. In order to increase the stability of the inversion, a technique was introduced to automatically adjust the Lagrangian multiplier according to the ratio of the error vector and the model update vector. Furthermore, to compensate for the loss of data due to noisy phase data, a two-step inversion method that conducts inversion iterations using only resistivity data in the beginning and both of resistivity and phase data in the second half was developed. As a result of the experiment for the synthetic data, stable inversion results were obtained, and the validity to real data was also confirmed by applying the developed 3D inversion algorithm to the analysis of field data acquired near a hydrothermal mine.
Cellulose 분해효소를 분비하는 Trichoderma sp. C-4
손영준,설옥주,정대균,한인섭,최윤재,정춘수 한국산업미생물학회 1997 한국미생물·생명공학회지 Vol.25 No.4
분해중인 볏짚으로부터 cellulase를 분비하는 곰팡이 C-4를 분리하였다. 분리된 균주의 형태적 배양적 특성을 조사한 결과 Trichoderma sp.로 분류되어 Trichoderma sp. C-4라고 명명하였다. 균을 Mandels 배지에서 6일동안 28℃에서 진탕배양한 후 배양액에 분비된 효소의 활성을 조사한 결과 CMCase 활성은 8.2 U/㎖(28.1 U/㎎), Avicelase활성은 0.75 U/㎖(2.58 U/㎎), β-glucosidase활성은 1.67 U/㎖(5.68 U/㎎)로 나타났다. 균배양 및 효소유도의 최적조건은 28℃, pH 6.2였다. 조효소는 50℃, pH 5.0에서 안정하였다. 1mM의 CsCl, LiCl, MgCl_2, CoCl_2에 대하여 CMCase활성이 영향받지 않았다. Trypsin과 chymotrypsin(2% w/w)에 의하여 10분 동안 30%의 활성이 상실되엇으나 그 후 60분 동안 더 이상의 활성 감소는 없었다. Rumen fluid에 대하여 24시간 동안 비교적 안정하였고, rumen fluid에 존재하는 효소와 CMC 및 Avicel에 대하여 각각 130% 및 118%의 상승효과를 나타내었다. During the screening of cellulase producing microorganisms, a fungal strain C-4 was selected from etiolated leaves. Based on taxonomic studies, the fungus could be classified as a strain of Trichoderma sp. When the strain C-4 was cultured in Mandel's media at 28℃ for 6 days, the enzyme activities detected in broth were as follows: 8.2 U/㎖ (28.1 U/㎎) of CMCase activity, 0.75 U/㎖ (2.58 U/㎎) of Avicelase activity, 1.67 U/㎖ (5.68 U/㎎) of β-glucosidase activity. The optimum pH for enzyme induction was 6.2. The crude enzyme retained 100% of its original CMCase activity at 50℃ for 1 hr (pH 5.0), and at 4℃ for 24 hrs (pH 5.0). There was no effect on the CMCase activity in the presence of 1 mM of CsCl, LiCl, MgCl_2 and FeCl_2, respectively. When the crude enzyme was treated with trypsin and chymotrypsin (2% w/w) for 10 minutes, the remaining CMCase activity was 70%, but there was no further loss of activity for 60 minutes treatment at 30℃. The crude enzyme showed the synergism with rumen fluid for the hydrolysis of Avicel and CMC by 118% and 130%, respectively.
손재익,박영옥,임정환,서정민,김상도,박석주,최호경,박현설 한국화학공학회 2001 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.39 No.4
소결금속섬유필터에 대한 압력손실, 먼지통과율, 부분집진효율 등의 기초 여과성능특성을 수행하였다. 두 종류의 필터가 적용되었고, 두 필터의 공극률 및 두께는 동일하고, 통기도와 여과정밀도는 다른 물리적 특성을 가지고 있다. 기초성능특성은 300×300 ㎜크기의 필터를 실험할 수 있는 필터성능실험장치를 가지고 조사하였다. 시험용 먼지로는 AC fine dust가 사용되었다. 압력손실은 여과속도와 먼지부하가 증가함에 따라 증가하였다. 먼지층 형성 초기 단계에는 여과포의 공극내에서 단일섬유 주위에 먼지입자가 응집되어 수지상 형태로 부착형성되었고, 먼지부하가 증가하여 가교형성에 의해 먼지층 형성이 진행된다. 균일먼지층 형성단계는 먼지부하가 계속 증가하여 먼지층 형성에 의해 여과포의 공극이 완전히 채워지고, 여과포 전체표면에 먼지층이 일정하게 포집되는 단계로 진행되었다. 먼지통과율은 먼지부하 초기단계에는 여과속도 증가에 따라 급격하게 증가하였고, 먼지부하가 증가함에 따라 급격하게 감소하였다. 압력손실 및 먼지통과율은 먼지부하 및 여과속도와 같은 운전변수로 상관관계식을 도출하였다. 상관관계식으로부터 계산된 압력손실 및 먼지통과율은 실험치와 잘 일치함을 알 수 있었다. 부분집진효율은 먼지부하에 따라 증가하였다. Basic filtration characteristics including pressure drop, penetration and fractional collection efficiency were investigated for sintered metal fiber filters. Two filters were applied. It was found that the porosity, weight and thickness were same, the air permeability and filtering accuracy were different. The performance test of fabric filter was investigated using a flat sheet filter testing unit, which can be applied to the filter of 300×300 ㎜ size. The test dust was AC Fine Dust. The pressure drop increased with filtration velocity and dust loading. The initial stage of dust cake formation was a growing process of particle dendrites on a single filament in the pore and the second stage was a bridge formation process with increasing dust loading. The final stage was a process of constant deposition of dust on a fabric surface under heavy dust loading conditions. The penetration sharply increased with filtration velocity in the intial stage of dust loading. It sharply decreased with dust loading, but the rate of decrease gradually diminished under heavy dust loading conditions. The pressure drop and penetration have been correlated in terms of operating variables such as dust loading and filtration velocity. The pressure drop and penetration calculated from the correlation equation have been compared with the experimental data and the agreement between the two data was fairly good. The fractional collection efficiency increased with dust loading.