http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Perfectly Matched Layer for Accurate FDTD for Anisotropic Magnetized Plasma
Jeahoon Cho,Min-Seok Park,Kyung-Young Jung 한국전자파학회JEES 2020 Journal of Electromagnetic Engineering and Science Vol.20 No.4
In this work, we propose a stable perfectly matched layer (PML) for accurate finite-difference time-domain (FDTD) methods for analyzing electromagnetic wave propagation in the anisotropic magnetized plasma region. Toward this purpose, we apply the complex frequency- shifted PML systematically to the E-J collocated FDTD method. In specific, auxiliary PML variables are included in the matrix calculation involved in the final update equations of the E-J collocated FDTD method. Numerical examples are used to validate the proposed PML-FDTD for anisotropic magnetized plasma.
Chain Matrix를 이용한 Twisted Cable의 EMP(Electromagnetic Pulse) 결합 해석
조제훈(Jeahoon Cho),이진호(Jinho Lee),김형동(Hyeongdong Kim) 한국전자파학회 2010 한국전자파학회논문지 Vol.21 No.7
본 논문은 다중 도체 전송선 해석법과 chain matrix 알고리즘을 이용하여 twisted cable과 같은 비균일 전송선의 EMP 결합을 해석하였다. 전송선의 EMP 결합 해석을 위해 BLT(Baum-Liu-Tesche) 해석법이 널리 사용되고 있으나, twisted cable과 같은 비균일 전송선에 기존의 BLT 해석법을 바로 적용하기는 어렵다. Twisted cable과 같은 비균일 전송선을 해석하기 위해 수많은 작은 길이의 균일 전송선으로 나누어 모델링하였으며, 전체 비균일 전송선의 결합 특성은 각각의 균일 전송선의 EMP 결합 분석을 통해 최종적인 전송선의 결합 특성을 구함으로써 가능해진다. 이러한 비균일 전송선 EMP 결합 해석 기법을 검증하기 위해 균일 전송선에 대하여 기존의 BLT 해석 결과와 비교하였으며, 제시된 비균일 전송선 EMP 결합 해석 기법을 지표면 위에 놓여 있는 twisted cable에 적용하여 대기 중의 핵폭발에 의한 HEMP(High altitude Electromagnetic Pulse)와 같은 매우 강한 펄스가 입사되었을 때, 전송선에 연결된 부하에 유기되는 전류(또는 전압) 응답을 분석하였다. In this paper, we analyzed the EMP coupling for the nonuniform transmission lines, such as twisted cables, using the chain matrix algorithm and the multi-conductor analysis. The BLT method is widely used for the EMP coupling analysis of the transmission line, however, it is difficult to apply to the nonuniform transmission lines. In order to analyze the EMP coupling of nonuniform transmission lines, the whole nonuniform transmission line is divided into incremental uniform line sections of the finite numbers, and the coupling in each small sections is now summed up to get the EMP coupling effect of the entire nonuniform transmission line. To verify the proposed EMP coupling analysis method, the result of the EMP coupling simulation is compared with the solution of BLT equations for a uniform transmission line case. The proposed method is applied to the twisted cable over ground in case of being illuminated by the HEMP in order to analyze the EMP coupling.
낙뢰에 노출된 높은 도전성 구조체의 간접적 영향 분석을 위한 전자파 해석기법 연구
조제훈(Jeahoon Cho),이진호(Jinho Lee),태현성(Hyun-Sung Tae),정경영(Kyung-Young Jung) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.11
본 논문은 유한 차분 시간 영역(FDTD: Finite-Difference Time-Domain)법을 이용하여 낙뢰에 노출된 항공기와 같이 높은 도전성 물질로 구성된 구조체의 간접적 영향 분석을 위한 전자파 해석기법 연구를 수행하였다. 간접적 영향 분석을 위해 사용되는 낙뢰 파형은 매우 낮은 주파수 특성을 가지며, 알루미늄과 탄소섬유복합물질과 같이 높은 도전성 물질들로 구성된 구조체는 매우 짧은 표피 깊이를 가지고 있기 때문에 일반적인 3차원 FDTD법을 이용하여 해석을 수행할 경우, 매우 많은 메모리와 해석시간이 요구된다. 본 연구팀에서는 낙뢰 특성과 높은 도전율을 갖는 구조에 적합한 전자파해석기법을 개발하였다. 개발된 해석 기법은 2차원 FDTD와 INBC(Impedance Network Boundary Condition) 알고리즘을 적용하였으며, 개발된 해석기법을 이용하여 낙뢰에 노출된 구조체의 간접적 영향을 분석하였다. We perform a electromagnetic analysis method for indirect effects of a high-conductive structure such as an aircraft exposed by lightning, by using the finite-difference time-domain(FDTD) method. The lightning waveform used to analyze indirect effects has low frequency spectrum and high-conductive materials such as aluminum and carbon fiber composite materials have very short skin depths, and thus, it requires large memory and long computation time using conventional three dimensional FDTD analysis method. We develop an efficient electromagnetic analysis method suitable for lightning and high-conductive structures. The developed analysis method is based on two dimensional FDTD and impedance network boundary condition(INBC) algorithms and we investigate the indirect effects on the structures exposed to lightning.
FDTD 방법을 이용한 간단한 건물 구조의 광대역 차폐 효과에 관한 연구
조제훈(Jeahoon Cho),하상규(Sang-Gyu Ha),박성민(Sungmin Park),추광욱(Kwanguk Chu),주세훈(Saehoon Ju),김형동(Hyeongdong Kim),정경영(Kyung-Young Jung) 한국전자파학회 2013 한국전자파학회논문지 Vol.24 No.7
본 논문은 유한 차분 시간 영역(FDTD: Finite-Difference Time-Domain)법을 이용하여 간단한 건물 구조의 광대역 복사성 펄스 결합에 관한 연구를 수행하였다. 이를 위해 건물을 콘크리트와 유리로 구성하였으며, 각 물질의 전기적 특성을 수치적으로 모델링하였다. 본 논문에서는 본 연구팀에서 개발한 분산 FDTD 알고리즘을 이용하여 건물의 전자파 특성 해석을 수행하고, 건물 구조에 따른 차폐 효과를 50 MHz~1 GHz 대역에서 분석하였다. We perform a wideband radiated pulse coupling analysis of simple building structures using the finite-deference time-domain(FDTD) method. Toward this purpose, the building structures composed of concrete and window materials are assumed and we numerically model the electrical properties of each material. In this work, we apply a dispersive FDTD algorithm for the electromagnetic analysis of building structures and investigate their shielding effectiveness in the frequency range of 50 MHz to 1 GHz.
Design of a Compact Antenna Array for Satellite Navigation System Using Hybrid Matching Network
Juneseok Lee,Jeahoon Cho,Sang-Gyu Ha,Hosung Choo,Kyung-Young Jung 대한전기학회 2018 Journal of Electrical Engineering & Technology Vol.13 No.5
An antenna arrays for a satellite navigation systems require more antenna elements to mitigate multiple jamming signals. In order to maintain the small array size while increasing the number of antenna elements, miniaturization technique is essential for antenna design. In this work, an electrically small circular microstrip patch antenna with a 3 ㏈ hybrid coupler is designed as an element antenna, where the 3 ㏈ hybrid coupler can yield the circularly polarized radiation characteristic. The miniaturized element antenna typically has too large capacitance in GPS L1 and GLONASS G1 bands, making it difficult to match with a single stand-alone non-Foster matching circuit (NFMC) in a stable state. Therefore, we propose a new matching technique, referred to as the hybrid matching method, which consists of a NFMC and a passive circuit. This passive tuning circuit manages reactance of antenna elements at an appropriate capacitance without a pole in the operating frequency range. The antenna array is fabricated, and the measured results show a reflection coefficient of less than -10 ㏈ and an isolation of greater than 50 ㏈. In addition, peak gain of the proposed antenna is increased by 22.3 ㏈ compared to the antenna without the hybrid matching network.
Design of a Compact Antenna Array for Satellite Navigation System Using Hybrid Matching Network
Lee, Juneseok,Cho, Jeahoon,Ha, Sang-Gyu,Choo, Hosung,Jung, Kyung-Young The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.5
An antenna arrays for a satellite navigation systems require more antenna elements to mitigate multiple jamming signals. In order to maintain the small array size while increasing the number of antenna elements, miniaturization technique is essential for antenna design. In this work, an electrically small circular microstrip patch antenna with a 3 dB hybrid coupler is designed as an element antenna, where the 3 dB hybrid coupler can yield the circularly polarized radiation characteristic. The miniaturized element antenna typically has too large capacitance in GPS L1 and GLONASS G1 bands, making it difficult to match with a single stand-alone non-Foster matching circuit (NFMC) in a stable state. Therefore, we propose a new matching technique, referred to as the hybrid matching method, which consists of a NFMC and a passive circuit. This passive tuning circuit manages reactance of antenna elements at an appropriate capacitance without a pole in the operating frequency range. The antenna array is fabricated, and the measured results show a reflection coefficient of less than -10 dB and an isolation of greater than 50 dB. In addition, peak gain of the proposed antenna is increased by 22.3 dB compared to the antenna without the hybrid matching network.
Sang-Gyu Ha,Jeahoon Cho,Juneseok Lee,Byoung-Woon Min,Jaehoon Choi,Kyung-Young Jung 한국전자파학회JEES 2018 Journal of Electromagnetic Engineering and Science Vol.18 No.2
Partial discharges (PDs) are electrical sparks that occur inside insulation between two conducting electrodes and can lead to the disastrous failure of insulation systems. To determine the location of a PD, a distributed array of UHF PD sensors is used to detect the electromagnetic (EM) signals emitted from the PD source, and the localization of the PD source can be estimated using the time difference of arrival (TDOA) between EM signals captured by the UHF PD sensor array. There are four popular methods to estimate the TDOA—the first peak method, the cross-correlation method, the energy criterion method, and the average time window threshold method. In this work, we numerically investigate the influence of noise on estimating the TDOA for the four different methods. Numerical results show that the energy criterion method is more robust against noise than other methods.