http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이재원 ( Jae-won Lee ),민경남 ( Kyong-nam Min ),정지욱 ( Ji-wook Jeong ),노병국 ( Byoung-kuk Roh ),이상진 ( Sang-jin Lee ),안태봉 ( Tae-bong Ahn ),강성승 ( Seong-seung Kang ) 대한지질공학회 2020 지질공학 Vol.30 No.1
본 연구는 기존의 강지보재보다 우수한 고강도 격자지보재를 개발하여 그 성능을 평가하기 위함이다. 이를 위해 수치해석을 이용한 지보재의 구조적 특성을 분석하였고, 시작품에 대한 최대 굽힘하중시험과 용접이음부 인장강도시험을 실시하여 그 성능을 평가하였다. 구조해석 결과에 따른 최적의 상하부부재와 플레이트의 규격은 50 mm × 31.8 mm × 25.4 mm로 시공성과 경제적이 우수한 것으로 나타났다. 굽힘하중시험으로부터 확정된 규격 55 mm × 30 mm × 20 mm와 85 mm × 30 mm × 20 mm의 고강도 격자지보재는 기준값과 H형강 100과 125의 목표값 모두 만족하는 것으로 나타났다. 이론 처짐량과 실제 처짐량의 비를 검토한 결과, 이 연구에서 개발된 고강도 격자지보재는 독일연방 철도국에서 제시하고 있는 격자지보재 처짐량의 평가기준 5 이하로 나타났다. 마지막으로 용접이음부에 대한 인장시험 결과는 고강도 격자지보재의 주봉-보조봉-플레이트가 접하는 용접이음부 인장강도가 목표값 이상으로 나타나 용접이음부에 대한 안정성은 충분한 것으로 나타났다. The objective of this study was to evaluate the performance of high-strength lattice girders as a possible superior alternative to conventional steel arch ribs. For this purpose, the structural characteristics of supports were analyzed using numerical analysis, and their performance was evaluated using maximum bending load tests and tensile tests of the welded joint. According to the results of structural analysis, the optimum size of the upper and lower members and plates is 50 mm × 31.8 mm × 25.4 mm, demonstrating excellent functionality and economic efficiency. High-strength lattice girders of dimensions 55 mm × 30 mm × 20 mm and 85 mm × 30 mm × 20 mm, determined from bending load tests, are found to meet both the reference values and the target values of H-profiles 100 and 125. A review of the ratio of theoretical deflection to actual deflection shows that the high-strength lattice girder developed during this study meets fewer than five of the evaluation criteria for lattice girder deflections proposed by the Federal Railway Department of Germany. Finally, tensile test results reveal that the welded joint of the high-strength lattice girder at the main steel bar-auxiliary steel bar-plate junction exceeds the target value, indicating that the welded joint has sufficient stability.
가동물체형 파력발전장치의 부하에 따른 유압변속시스템의 특성 분석에 관한 연구
노찬(Roh Chan),박지용(Ji Yong Park),하윤진(Yoon-Jin Ha),천호정(Ho Jung Cheon),김재환(Jae Hwan Kim),김경환(Kyong-Hwan Kim),신승호(Seung Ho Shin) 한국해양환경·에너지학회 2020 한국해양환경공학회 학술대회논문집 Vol.2020 No.7
본 연구에서는 가동물체형 파력발전장치의 부하에 따른 유압변속시스템의 특성 분석을 진행하였다. 파력발전장치는 다양한 시스템이 서로 연결되어 있기 때문에 파력발전장치 해석을 위해서는 상호연성을 고려한 프로그램이 필요하며, 기존에 파력발전장치 해석을 위한 WEC-Sim이 존재하지만, 부하 제어 알고리즘은 적용이 불가능하다. 따라 본 연구에서는 에너지변환장치(유압시스템-부하시스템)의 상호 연성을 통해 부하 제어 알고리즘을 적용하기 위하여 유압변속시스템의 모델링을 진행하였다. 부하에 따른 유압변속시스템의 특성은 본 연구에서 개발된 모델링을 통해 분석하였고, 상용프로그램인 AMESIM의 상호비교를 통해 성능을 검증하였다. 유압변속시스템의 모델링은 향후 부하 제어 알고리즘이 적용된 연성 시뮬레이터에 활용할 예정이다. In this study, we analyzed the characteristics of the hydraulic transmission system according to the load in movable object type wave energy converter. Since various systems are connected to each other, the wave energy converter needs a program that can be interconnected to analyze the wave energy converter. WEC-Sim exists to analyze the existing wave energy converter, but the load control algorithm is not applied. So, in this study, modeling of the hydraulic transmission system was performed to apply the load control algorithm through the interconnection of the energy conversion system (hydraulic system-load system). The characteristics of the hydraulic transmission system according to the load are verified by comparing the modeling developed in this study with AMESIM. As a result, modeling of the hydraulic transmission system will be used in a interconnected simulator to which a load control algorithm is applied in the future.
Survey on major pest incidence of rice in 2018
Sung-Jun Hong,Kyong-Jae Lee,Ui-Seok Chae,Hyeong-Il Roh,Jun-yong Chung 한국응용곤충학회 2019 한국응용곤충학회 학술대회논문집 Vol.2019 No.04
전국 136개 시군에 있는 690개소 벼 관찰포에서 12종의 주요 해충을 6월 1일부터 9월 16일까지 15일 간격으로 총 8회 조사한 결과를 국가농작물병해충관리시스템(NCPMS)을 통하여 수집하였다. 2018년도 벼 주요해충 12종의 총 발생 추정면적은 94,049ha로 재배면적 대비 12.7%에 발생되었다. 발생면적이 가장 많았던 해충은 먹노린재로 해충 총 발생면적의 34.9%인 32,779ha(재배면적 대비 4.4%)에서 발생이 확인되었다. 2018년 먹노린재 발생은 평년의 346%, 전년의 155% 수준으로 최근 몇 년간 계속해서 발생이 증가되고 있는 추세이다. 특히 전남(15,191ha)과 충남 (10,041ha) 지역에서 발생이 많은 것을 확인할 수 있었다. 먹노린재 다음으로는 벼물바구미 17,711ha(재배면적 대비 2.4%), 흰등멸구 14,885ha(재배면적 대비 2.0%), 혹명나방 9,130ha(재배면적 대비 1.2%), 애멸구 4,960ha(재배면적 대비 0.7%) 순으로 발생이 많았다. 10년간 평균간 비교하여 발생이 증가된 해충은 먹노린재 1종이었으며 나머지 11종은 발생이 감소된 것으로 확인되었다. 결론적으로 2018년 벼 주요해충의 발생정도는 전년대비 59%, 10년간 평균 대비 38% 수준으로 발생이 낮은 경향임을 알 수 있었다.