http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Hanxin Liu (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Renlong Xiong,Yi Liu,Haitao Si,Huabei Peng,Shanling Wang,Binhan Sun,Hanxin Chen,Hyoung Seop Kim,Yuhua Wen 대한금속·재료학회 2021 METALS AND MATERIALS International Vol.27 No.10
In order to improve the work hardening capacity under low stresses and the yield strength of conventional Hadfield steels, theeffects of Si on the microstructure and work hardening behavior of the Fe‒17Mn‒1.1C‒xSi steels under both quasi-statictensile and low load impact are investigated. It is shown that the increase of the Si contents remarkably improves the yieldstrength by 36 MPa per 1 wt% Si in the investigated steel system without significant sacrifice of ductility. The decreasingeffect of Si on the stacking fault energy is strongly affected by carbon, although the variation of carbon content was small. This led to the unexpected similar stacking fault energy between 1Si and 2Si steel. With the increase of the Si contents forthe steels, the critical strain for the onset of mechanical twinning was lowered, which was controlled by the cooperationbetween the stacking fault energy and solid solution strengthening of Si. This resulted in the earlier initiation of mechanicaltwins and an increase in the twin volume fraction. Therefore, the work hardening capacities under both quasi-static tensileand low load impact tests were enhanced. It was also found that the impact deformation decreased as more mechanical twinsabsorbed the impact energy.
-
Effect of ZnO on the microstructures and piezoelectric properties of K0.5Na0.5NbO3 ceramics
Zhuo Li,Xiangbang Cheng,Zhonghua Yao,Yang Liu,Hanxin Liu,Minghe Cao 한양대학교 세라믹연구소 2009 Journal of Ceramic Processing Research Vol.10 No.5
Lead-free ZnO added K0.5Na0.5NbO3 piezoelectric ceramics have been prepared by a conventional solid state process. The XRD results show that all the K0.5Na0.5NbO3 ceramics with various ZnO contents are single phase with an orthorhombic perovskite structure. The bulk density obtained by the Archimedes method indicates that the addition of ZnO improves the density of K0.5Na0.5NbO3 ceramics under the same sintering conditions. Especially, at a level of 1 mol% ZnO, the sample sintered at 1100 oC for 1h exhibits the highest bulk density (ρ = 4.28 g/㎤) and shows optimal piezoelectric properties, d33 = 135 pC/N and kp = 0.40. Lead-free ZnO added K0.5Na0.5NbO3 piezoelectric ceramics have been prepared by a conventional solid state process. The XRD results show that all the K0.5Na0.5NbO3 ceramics with various ZnO contents are single phase with an orthorhombic perovskite structure. The bulk density obtained by the Archimedes method indicates that the addition of ZnO improves the density of K0.5Na0.5NbO3 ceramics under the same sintering conditions. Especially, at a level of 1 mol% ZnO, the sample sintered at 1100 oC for 1h exhibits the highest bulk density (ρ = 4.28 g/㎤) and shows optimal piezoelectric properties, d33 = 135 pC/N and kp = 0.40.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
