http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Frédéric Duprat (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
Bond stress-slip Behaviour of Steel Reinforcing Bar Embedded in Hybrid Fiber-reinforced Concrete
Rashid Hameed,Anaclet Turatsinze,Frédéric Duprat,Alain Sellier 대한토목학회 2013 KSCE JOURNAL OF CIVIL ENGINEERING Vol.17 No.7
Experimental study was carried out to evaluate the application of metallic fibers to confine the concrete in column-beam joint. Pullout tests on cubic specimens of size 200 × 200 × 200 mm with deformed steel bar embedded for a fixed length of 5 times the diameter of tested deformed bar were performed under monotonic applied displacement at the tip of the bar (displacement controlled tests). The key variable of the experimental study was the different confining conditions; by ordinary reinforcing steel bars, and by metallic fibers. To confine the concrete by the fibers, two different types of metallic fibers were used; amorphous metallic fibers and carbon steel hooked-end fibers. The fibers were investigated both in mono and hybrid forms. The dosage of fibers in mono fiberreinforced concrete was kept 40 kg/m3. In case of hybrid fiber-reinforced concrete, two concrete compositions were investigated: one containing 20 kg/m3 of each fiber and second containing 40 kg/m3 of each type of fiber. The pullout tests results revealed that both types of fibers contribute to ameliorate the peak bond stress and also to improve the ascending branch of the bond stress versus slip curve in terms of stiffness. Comparison of the bond stress-slip response of anchored bar in concrete confined by the ordinary reinforcing steel bars and by the metallic fibers demonstrated that the concrete confined by the fibers in hybrid form showed better performance than the concrete confined by the ordinary steel bars in terms of peak bond stress and toughness. Since the hybrid form of investigated metallic fibers realize same effect as that by ordinary steel, the congestion of steel in seismic resistant column-beam joint can be avoided by replacing some percentage of steel ratio to confine the concrete by the metallic fibers.
-
Simplified Approach to Model Steel Rebar-Concrete Interface in Reinforced Concrete
Rashid Hameed,Alain Sellier,Anaclet Turatsinze,Frédéric Duprat 대한토목학회 2017 KSCE Journal of Civil Engineering Vol.21 No.4
For correct description of cracking process in reinforced concrete structural elements, the simulation of the behaviour of steel rebarconcrete interface is always of primary importance. This paper proposes a simplified method to model the steel rebar-concrete interface in RC structures. The proposed method considers the introduction of massive elasto-plastic isotropic bond element as steel rebarconcrete interface. Stress-strain behaviour curve required for elasto-plastic isotropic material is obtained by performing conventional pull-out tests on concrete. For plain concrete matrix, an orthotropic damage model based on plasticity and damage theories was adopted for finite element modelling in Finite Element (FE) code CASTEM. In order to validate the proposed approach, a comprehensive experimental program was designed and carried out. Under this program, pure tension test on RC prisms and flexural test on RC beams were performed. Testing of proposed steel rebar-concrete interface bond model in numerical simulation of RC prism subjected to pure tension and RC beam in flexure, and comparison of numerical simulation results with experimental data is also discussed in this paper.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
