Biochar composition-dependent impacts on soil nutrient release, carbon mineralization, and potential environmental risk: A review

El-Naggar, Ali,El-Naggar, Ahmed Hamdy,Shaheen, Sabry M.,Sarkar, Binoy,Chang, Scott X.,Tsang, Daniel C.W.,Rinklebe, Jö,rg,Ok, Yong Sik Academic Press 2019 Journal of Environmental Management Vol. No.

<P><B>Abstract</B></P> <P>Biochar application has multiple benefits for soil fertility improvement and climate change mitigation. Biochar can act as a source of nutrients and sequester carbon (C) in the soil. The nutrient release capacity of biochar once applied to the soil varies with the composition of the biochar, which is a function of the feedstock type and pyrolysis condition used for biochar production. Biochar has a crucial influence on soil C mineralization, including its positive or negative priming of microorganisms involved in soil C cycling. However, in various cases, biochar application to the soil may cause negative effects in the soil and the wider environment. For instance, biochar may suppress soil nutrient availability and crop productivity due to the reduction in plant nutrient uptake or reduction in soil C mineralization. Biochar application may also negatively affect environmental quality and human health because of harmful compounds such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzodioxins, and dibenzofurans (PCDD/DF). In this review, we discuss the linkage between biochar composition and function, evaluate the role biochar plays in soil fertility improvement and C sequestration, and discuss regulations and concerns regarding biochar's negative environmental impact. We also summarize advancements in biochar production technologies and discuss future challenges and priorities in biochar research.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Nutrient contents in biochar highly dependent on the feedstock type. </LI> <LI> Pyrolysis temperature alters the proportion of aromatic and aliphatic C fractions. </LI> <LI> Chemical and physical properties of biochar affect the nutrient release from biochar. </LI> <LI> Application of unsuitable biochar can negatively affect environmental quality and human health. </LI> <LI> Biochar can be a potential source of polycyclic aromatic hydrocarbons and polychlorinated dibenzodioxins. </LI> </UL> </P>

Vertical and torsional soil reactions for radially inhomogeneous soil layer

El Naggar, M. Hesham Techno-Press 2000 Structural Engineering and Mechanics, An Int'l Jou Vol.10 No.4

The response of an embedded body to dynamic loads is greatly influenced by the reactions of the soil to the motion of the body. The properties of the soil surrounding embedded bodies (e.g., piles) may be different than those of the far-field for a variety of reasons. It may be weakened or strengthened according to the method of installation of piles, or altered due to applying one of the soil strengthening technique (e.g., electrokinetic treatment of soil, El Naggar et al. 1998). In all these cases, the shear strength of the soils and its shear modulus vary gradually in the radial direction, resulting in a radially inhomogeneous soil layer. This paper describes an analysis to compute vertical and torsional dynamic soil reactions of a radially inhomogeneous soil layer with a circular hole. These soil reactions could then be used to model the soil resistance in the analysis of the pile vibration under dynamic loads. The soil layer is considered to have a piecewise, radial variation for the complex shear modulus. The model is developed for soil layers improved using the electrokinetic technique but can be used for other situations where the soil properties vary gradually in the radial direction (strengthened or weakened). The soil reactions (impedance functions) are evaluated over a wide range of parameters and compared with those obtained from other solutions. A parametric study was performed to examine the effect of different soil improvement parameters on vertical and torsional impedance functions of the soil. The effect of the increase in the shear modulus and the width of the improved zone is investigated.

Organic Acids Associated with Saccharification of Cellulosic Wastes During Solid-State Fermentation

Noura El-Ahmady El-Naggar,Mohammed Saad El-Hersh 한국미생물학회 2011 The journal of microbiology Vol.49 No.1

Saccharification of five cellulosic wastes, i.e. rice husks, wheat bran, corn cobs, wheat straw and rice straw by three cellulytic fungi, i.e. Aspergillus glaucus MN1, Aspergillus oryzae MN2 and Penicillium purpurogenum MN3, during solid-state fermentation (SSF) was laboratory studied. Rice husks, wheat bran, and corn cobs were selected as inducers of glucose production in the tested fungi. An incubation interval of 10 days was optimal for glucose production. Maximal activities of the cellulases FP-ase, CMC-ase, and β-glucosidase were detected during SSF of rice husks by P. purpurogenum; however, α-amylase activity (7.2 U/g) was comparatively reduced. Meanwhile, the productivities of FP-ase, CMC-ase, and β-glucosidase were high during SSF of rice husks by A. glaucus; however, they decreased during SSF of corn cobs by P. purpurogenum. Addition of rock phosphate (RP) (75 mg P_2O_5) decreased the pH of SSF media. (NH_4)_2SO_4 was found to be less inducer of cellulytic enzymes, during SSF of rice husks by A. glaucus or A. oryzae; it also induced phytase production and solubilization of RP. The organic acids associated with saccharification of the wastes studied have also been investigated. The highest concentration of levulinic acid was detected (46.15 mg/g)during SSF of corn cobs by P. purpurogenum. Likewise, oxalic acid concentration was 43.20 mg/g during SSF of rice husks by P. purpurogenum.

Bioactive Compounds and Chemical Biology : Fabrication of Biogenic Antimicrobial Silver Nanoparticles by Streptomyces aegyptia NEAE 102 as Eco-Friendly Nanofactory

( Noura El-ahmady El-naggar ),( Nayera A M Abdelwahed ),( Osama M M Darwesh ) 한국미생물 · 생명공학회 2014 Journal of microbiology and biotechnology Vol.24 No.4

The current research was focused on the extracellular biosynthesis of bactericidal silver nanoparticles (AgNPs) using cell-free supernatant of a local isolate previously identified as a novel Streptomyces aegyptia NEAE 102. The biosynthesis of silver nanoparticles by Streptomyces aegyptia NEAE 102 was quite fast and required far less time than previously published strains. The produced particles showed a single surface plasmon resonance peak at 400 nm by UV.Vis spectroscopy, which confirmed the presence of AgNPs. Response surface methodology was chosen to evaluate the effects of four process variables (AgNO3 concentration, incubation period, pH levels, and inoculum size) on the biosynthesis of silver nanoparticles by Streptomyces aegyptia NEAE 102. Statistical analysis of the results showed that the linear and quadratic effects of incubation period, initial pH, and inoculum size had a significant effect (p < 0.05) on the biosynthesis of silver nanoparticles by Streptomyces aegyptia NEAE 102. The maximum silver nanoparticles biosynthesis (2.5 OD, at 400 nm ) was achieved in runs number 5 and 14 under the conditions of 1 mM AgNO3 (1-1.5% (v/v)), incubation period (72-96 h), initial pH (9-10), and inoculum size (2-4% (v/v)). An overall 4-fold increase in AgNPs biosynthesis was obtained as compared with that of unoptimized conditions. The biosynthesized silver nanoparticles were characterized using UV-VIS spectrophotometer and Fourier transform infrared spectroscopy analysis, in addition to antimicrobial properties. The biosynthesized AgNPs significantly inhibited the growth of medically important pathogenic gram-positive (Staphylococcus aureus) and gram-negative bacteria (Pseudomonas aeruginosa) and yeast (Candida albicans).

Application of Statistical Experimental Design for Optimization of Silver Nanoparticles Biosynthesis by a Nanofactory Streptomyces viridochromogenes

Noura El-Ahmady El-Naggar,Nayera A.M. Abdelwahed 한국미생물학회 2014 The journal of microbiology Vol.52 No.1

Central composite design was chosen to determine the combined effects of four process variables (AgNO3 concentration,incubation period, pH level and inoculum size) on the extracellular biosynthesis of silver nanoparticles (AgNPs) by Streptomyces viridochromogenes. Statistical analysis of the results showed that incubation period, initial pH level and inoculum size had significant effects (P 0.05) on the biosynthesis of silver nanoparticles at their individual level. The maximum biosynthesis of silver nanoparticles was achieved at a concentration of 0.5% (v/v) of 1 mM AgNO3, incubation period of 96 h, initial pH of 9 and inoculum size of 2% (v/v). After optimization, the biosynthesis of silver nanoparticles was improved by approximately 5-fold as compared to that of the unoptimized conditions. The synthetic process of silver nanoparticle generation using the reduction of aqueous Ag+ ion by the culture supernatants of S. viridochromogenes was quite fast, and silver nanoparticles were formed immediately by the addition of AgNO3 solution (1 mM) to the cell-free supernatant. Initial characterization of silver nanoparticles was performed by visual observation of color change from yellow to intense brown color. UV-visible spectrophotometry for measuring surface plasmon resonance showed a single absorption peak at 400 nm, which confirmed the presence of silver nanoparticles. Fourier Transform Infrared Spectroscopy analysis provided evidence for proteins as possible reducing and capping agents for stabilizing the nanoparticles. Transmission Electron Microscopy revealed the extracellular formation of spherical silver nanoparticles in the size range of 2.15–7.27 nm. Compared to the cell-free supernatant, the biosynthesized AgNPs revealed superior antimicrobial activity against Gram-negative, Gram-positive bacterial strains and Candida albicans.

Antipseudomonal Activity and Nephrotoxicity of Cephradine-Netilmicin Combination

El Emam, M.A.,El Naggar, W.A.,Ibrahiem, T.M. The Pharmaceutical Society of Korea 1989 Archives of Pharmacal Research Vol.12 No.2

The effects of intraperitoneal injection of cephradine in a dose of 75 mg/kg and netilmicin in dose of 50 mg/kg and their combination on creatinine and urea serum levels of rabbits were studied as well as the antipseudomonal activity against three multiresistant clinicial isolates. The antibacterial activity was investigated by two methods: Checkerboard titration method and time-kill studies. Finally, the antibacterial activity of the sera obtained from the rabbits receiving the used drugs in the previous regimen was studied using time-kill study method against Pseudomonas aeruginosa isolates. Results obtained from this study indicated that both creatinine and urea serum levels of the rabbits receiving both drugs were not significantly different from those of the rabbits receiving either cephradine or netilmicin alone. At the same time the in vitro antibactrial activity (either of the prepared solutions of the used drugs and their combination or of the sera obtained from the rabbits receiving these drugs as mentioned before) showed a synergistic effect against the tested strains of Pseudomonas aeruginosa

Multi-Objective Optimal Predictive Energy Management Control of Grid-Connected Residential Wind-PV-FC-Battery Powered Charging Station for Plug-in Electric Vehicle

El-naggar, Mohammed Fathy,Elgammal, Adel Abdelaziz Abdelghany The Korean Institute of Electrical Engineers 2018 Journal of Electrical Engineering & Technology Vol.13 No.2

Electric vehicles (EV) are emerging as the future transportation vehicle reflecting their potential safe environmental advantages. Vehicle to Grid (V2G) system describes the hybrid system in which the EV can communicate with the utility grid and the energy flows with insignificant effect between the utility grid and the EV. The paper presents an optimal power control and energy management strategy for Plug-In Electric Vehicle (PEV) charging stations using Wind-PV-FC-Battery renewable energy sources. The energy management optimization is structured and solved using Multi-Objective Particle Swarm Optimization (MOPSO) to determine and distribute at each time step the charging power among all accessible vehicles. The Model-Based Predictive (MPC) control strategy is used to plan PEV charging energy to increase the utilization of the wind, the FC and solar energy, decrease power taken from the power grid, and fulfil the charging power requirement of all vehicles. Desired features for EV battery chargers such as the near unity power factor with negligible harmonics for the ac source, well-regulated charging current for the battery, maximum output power, high efficiency, and high reliability are fully confirmed by the proposed solution.

A PERTURBATION METHOD FOR A SET OF QUASI-LINEAR OSCILLATORY SYSTEMS WITH VARIABLE NATURAL FREQUENCY

El-Naggar, A.,Ahmed, I. Department of Mathematics 1985 Kyungpook mathematical journal Vol.25 No.2

Solid-State Fermentation for the Production of Meroparamycin by Streptomyces sp. strain MAR01

El Naggar,Moustafa Y.,Samy A. El Assar,Sahar M. Abdul Gawad 한국미생물 · 생명공학회 2009 Journal of microbiology and biotechnology Vol.19 No.5

Meroparamycin Production by Newly Isolated Streptomyces sp. Strain MAR01: Taxonomy, Fermentation, Purification and Structural Elucidation

El-Naggar Moustafa Y.,El-Assar Samy A.,Abdul-Gawad Sahar M. The Microbiological Society of Korea 2006 The journal of microbiology Vol.44 No.4

Twelve actinomycete strains were isolated from Egyptian soil. The isolated actinomycete strains were then screened with regard to their potential to generate antibiotics. The most potent of the producer strains was selected and identified. The cultural and physiological characteristics of the strain identified. the strain as a member of the genus Streptomyces. The nucleotide sequence of the 16S rRNA gene (1.5kb) of the most potent strain evidenced a 99% similarity with Streptomyces spp. and S. aureofaciens 16S rRNA genes, and the isolated strain was ultimately identified as Streptomyces sp. MAR01. The extraction of the fermentation broth of this strain resulted in the isolation of one major compound, which was active in vitro against gram-positive, gram-negative representatives and Candida albicans. The chemical structure of this bioactive compound was elucidated based on the spectroscopic data obtained from the application of MS, IR, UV, $^1H$ NMR, $^{13}C$ NMR, and elemental analysis techniques. Via comparison to the reference data in the relevant literature and in the database search, this antibiotic, which had a molecular formula of $C_{19}H_{29}NO_2$ and a molecular weight of 303.44, was determined to differ from those produced by this genus as well as the available known antibiotics. Therefore, this antibiotic was designated Meroparamycin.