http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고범용(B.Y. GO),백연식(Y.S. Baik),이은석(E.S. Lee),이재은(J.E. Lee),허기훈(K.H. Hur) 한국전산유체공학회 2013 한국전산유체공학회 학술대회논문집 Vol.2013 No.5
A control fin is necessary for the flying object in order to satisfy its stability and maneuverability. In general, a tail is selected as a control fin and the control effectiveness of the tail is very important. Therefore, it is required to study the variables which have influence on tail performance. When side jets are located ahead of tails, the flow field around tails has interferences with side jets. So the aerodynamic characteristics of a missile with side jet is different from that of a missile without side jet. In this study, the influences of side jet on the missile aerodynamics are investigated by use of the computational fluid dynamics. The aerodynamic characteristics are found be affected by not only the free stream conditions, e.g. free stream velocity, angle of attack and bank angle but also the jet conditions, e.g. the temperature and gas property of jet.
이재은(J. E. Lee),이태규(T. K. Lee),이상곤(S. K. Lee),김병민(B. M. Kim) 한국소성·가공학회 2008 소성가공 : 한국소성가공학회지 Vol.17 No.8
The cross sectional shape of intermediate die is one of important parameters to improve dimensional accuracy of final product in shaped drawing process. Until now, it has been designed by the experience or trial and error of the expert. In this study, the cross sectional shape of intermediate die for spline shape is determined by the electric fields analysis and scale factor method. The result of the electric fields analysis and scale factor method have been compared with that of the expert method. The effects of cross sectional shape on the dimensional accuracy were investigated by using FE-simulation. And then the multi-stage shaped drawing experiments were performed to verify the results of FE-simulation. As a result, the cross sectional shape from the electric fields analysis and scale factor method had the good dimensional accuracy. These two methods can be used for the method to obtain the cross sectional shape of intermediate die in shaped drawing process.
저속 압축성 유동에서 예조건화 방법을 이용한 수렴성 증진에 대한 연구
이재은(J. E. Lee),박수형(S. H. Park),권장혁(J. H. Kwon) 한국전산유체공학회 2004 한국전산유체공학회 학술대회논문집 Vol.2004 No.-
It is well known that preconditioning methods are efficient for convergence acceleration at compressible low Mach number flows. In this study, the original Euler equations and three preconditioners nondimensionalized differently arc implemented in two dimensional inviscid bump flows using the 3rd order MUSCL and DADI schemes as flux discretization and time integration respectively. The multigrid and local time stepping methods are also used to accelerate the convergence. The test case indicates that a properly modified local preconditioning technique involving concepts of a global preconditioning one produces Mach number independent convergence. Besides, an asymptotic analysis for properties of preconditioning methods is added.
근적외선 분광분석법을 이용한 토양의 탄소유기물 함량 예측에 관한 연구
이재은 ( Jae-eun Lee ),이혜인 ( Hye-in Lee ),최재현 ( Jae-hyun Choi ),김민지 ( Min-jee Kim ),양재의 ( Jae E Yang ),모창연 ( Changyeun Mo ) 한국농업기계학회 2021 한국농업기계학회 학술발표논문집 Vol.26 No.2
토양 유기탄소는 토양의 질을 결정하는 요소로 토지의 생산성 유지뿐만 아니라 대기 중 이산화탄소 경감, 지구온난화 완화와 같은 환경생태계 유지에도 중요한 역할은 한다. 따라서 토양 유기탄소 보존을 위해 그 함량을 파악하는 것이 중요하다. 토양의 유기물 함량 측정을 위한 화학분석방법은 시간과 비용이 많이 소요되며 전문 인력을 필요로 한다. 이에 다양한 지역의 많은 데이터를 확보하기 위한 제약조건들이 존재한다. 반면에 분광분석법은 토양의 분광학적 특성을 이용하여 토양특성을 분석할 수 있어 짧은 측정시간과 저비용의 높은 효율성을 가지고 있다. 따라서, 본 연구에서는 토양의 가시 및 근적외선 영역 분광 측정을 통해 토양의 특성을 분석하고 유기 탄소 함량을 예측하는 모델을 개발하고자 한다. 실험에 사용된 시료는 총 240곳에서 토성이 서로 다른 강원도와 경기도 지역의 토양을 채취하였다. 분광분석을 위해 샘플의 스펙트럼을 가시근적외선 (visible/near-infrared; VNIR) 영역인 500nm-1100nm 파장대에서 USB4000 Fiber Optic Spectrometer (Ocean Optics, Inc., USA)을 사용하여 측정하였고 근적외선(near-infrared; NIR)영역인 900nm-2500nm파장대에서 SM304(Korea Spectral Products, Kor.)을 사용하여 측정하였다. VNIR 및 NIR 파장대에서 샘플 당 1회씩 측정 후 3반복 진행하였다. 측정된 600개의 토양 스펙트럼과 유기물함량을 대상으로 부분최소제곱회귀법(Partial Least Squares Regression; PLSR)을 적용하여 예측모델을 개발하였고, 이를 검증하기 위해 120개의 데이터를 무작위로 선발하여 결정계수(R2)와 RMSE 값으로 성능을 평가하였다. 그 결과, 토양의 유기탄소 예측모델이 우수한 성능을 보였다. 추후 작물 재배 지역의 유기 탄소 함량을 예측하여 토양 성분관리에 활용될 것으로 기대된다.
근적외선 분광분석법을 이용한 작물 재배포장별 표토의 유기탄소 함량 예측을 위한 PLSR과 SVMR 모델 개발
이재은 ( Jae-eun Lee ),이혜인 ( Hye-in Lee ),김민지 ( Min-jee Kim ),양재의 ( Jae E Yang ),모창연 ( Changyeun Mo ) 한국농업기계학회 2022 한국농업기계학회 학술발표논문집 Vol.27 No.1
토양유기탄소는 토양 비옥도 유지 및 농업 생산능력에 중요한 역할을 하며 기후, 토지 사용, 농업시스템 등에 따라 함량이 변화한다. 토양유기탄소 손실은 농작물 생산량 감소를 야기시키므로 토양 유기탄소 함량을 보전하기 위해 그 함량을 파악하고 예측하는 것이 중요하다. 근적외선 분광법은 토양의 분광학적 특성을 이용하여 토양의 물리적 화학적 특성을 비파괴적으로 신속하게 측정할 수 있는 기술이다. 본 연구에서는 근적외선 분광법을 이용하여 각 작물의 재배포장의 토양 유기탄소 함량을 측정하기 위한 예측 모델을 개발하고자 한다. 실험에 사용된 토양 시료는 토성이 서로 다른 강원도 내 총 330 지역에서 수집하였다. 토양 시료들의 스펙트럼은 가시근적외선 (visible/near-infrared; VNIR) 영역인 500nm-1100nm 파장대에서 USB4000 Fiber Optic Spectrometer (Ocean Optics, Inc., USA)을 사용하여 측정하였고 근적외선(near-infrared; NIR)영역인 900nm-2500nm파장대에서 SM304(Korea Spectral Products, Kor.)을 사용하여 측정하였다. VNIR 및 NIR 파장 대역에서 토양 시료 당 3회씩 측정하고 일정시간 경과 후 3회 반복 수행하였다. 약 2,500개의 토양 스펙트럼을 획득하였으며 이 스펙트럼들을 작물 재배포장에 따라 분류하였다. 부분최소제곱회귀법(Partial Least Squares Regression; PLSR)과 서포트벡터머신(Support Vector Machine Regression; SVMR) 적용하여 각 작물 재배포장에 따른 토양유기탄소예측모델을 개발하였다. 각 작물별 스펙트럼 데이터의 전처리 적용 모델을 개발하여 최적 모델을 선정하였다. 토양 유기탄소 함량 예측 모델의 성능 평가는 결정계수(R2)와 평균 제곱근 오차(RMSE)를 사용하였다. 그 결과, 작물 재배포장별 유기탄소 예측 모델이 우수한 성능을 보였으며 추후 토양 성분 관리에 활용될 것으로 기대된다.