유치와 영구치에서 치과용 접착제의 전단결합강도

최진영,최남기,박영준,최충호,양규호 大韓小兒齒科學會 2007 大韓小兒齒科學會誌 Vol.34 No.4

The objective of this study was to compare the shear bond strengths of five adhesive systems to the enamel and dentin of primary and permanent teeth. Fifty noncarious primary and fifty permanent teeth were collected and stored in an 0.1% thymol solution at room temperature after extraction. The tested adhesives were: Adper Scotchbond Multi-purpose Plus Adhesive (SM) Adper Single bond 2 (SB), Clearfil SE Bond (SE), Adper Prompt L-Pop (PL), G-Bond (GB). For the shear bonding test, the labial and lingual surfaces of primary and permanent teeth were used. To obtain a flat surface, the labial and lingual surfaces of the teeth were sanded on SiO₂with number 600 grit and then divided into 20 groups of 10 surfaces each. All samples were theromocycled in water 5℃ and 55℃ for 1000 cycles. The results were as follows: 1. For primary enamel, shear bond strengths of SM and SB were significantly higher than that of SE and also SM, SB, and PL were higher than GB(p<0.05). 2. For primary dentin, there were no significant differences among the shear bond strengths of any other bonding systems except differnece between SE and GB. 3. For permanent enamel, SB showed significantly higher mean shear bond strength than those of any other bonding systems(p<0.05). 4. For permanent dentin, SM showed significantly higher mean shear bond strength than that of PL and GB(p<0.05). 5. Between the primary enamel and dentin, there were significant differences in SM, SB, and GB, whereas there was statistically significant difference in PL between the permanent enamel and dentin(p<0.05). 6. Between the primary and permanent teeth on enamel, there were no significant differences among all bonding systems, whereas there were statistically significant differences in SM and SB between the primary and permanent teeth on dentin(p<0.05). 본 연구에서는 최근에 개발된 치과용 접착제를 대상으로 유치와 영구치의 법랑질과 상아질에 대한 결합력을 비교 평가하여 입상에서 상아질 접착제를 적절하게 선택하는데 도움을 주고자 시행하였다. 실험재료로 Adper Scotchbond Multi-purpose Plus Adhesive (SM; 3M ESPE,USA),Adper Single bond 2 (SB; 3M ESPE,USA),Clearfil SE Bond (SE; Kuraray Medical Inc.,Japan),Adper Prompt L-Pop (PL; 3M ESPE,USA),G-Bond (GB:GC Cooperation Toyko,Japan)를 이용하여 전단결합강도를 평가하여 다음과 같은 결과를 얻었다. 1. 유치 법랑질에서 전단결합강도는 SM이 28.47±7.93 MPa로 가장 높았고 SB (28.18±6.84),PL (24.02± 6.14),SE (21.70±6.56),GB (17.70±6.68) 순이었다. SM과 SB는 SE보다 통계적으로 유의하게 높은 결합 강도를 보였으며,SM,SB,PL은 GB보다 높았다(p<0.05). 2. 유치 상아질에서 전단결합강도는 SE가 28.72±14.44MPa로 가장 높았고,PL (20.10±6.13),SM 07.72± 10.65),SB (15.48±2.66),GB (10.10±5.45) 순이었으며 SE와 GB간 에는 유의한 차이가 있었으나,다른 군 들 간에는 유의한 차이가 없었다. 3. 영구치 법랑질에서의 전단결합강도는 SB가 28.36±5.68 MPa로 가장 높았고 SM (22.77±4.63), PL(22.05 士6.57),SE (21.74±4.62),GB (15.60±6.75)순이었다. SB는 다른 접착제보다 통계적으로 유의하게 높은 결합력을 나타냈으며,GB는 가장 낮은 결합력을 보였다(p(0.05). 4. 영구치 상아질에서의 전단결합강도는 SM이 28.22±5.56 MPa로 가장 높았고,SB (21.68±7.44),SE (20.13 ±9.88),GB (14.30±6.81),PL (14.18±5.88)순이었으며,SM은 PL,GB와 유의한 차이가 있었다(p<0.05). 5. 유치의 법랑질과 상아질 간에는 SM,SB,GB에서 유의한 차이가 있었고,영구치 법랑질과 상아질 간에는 PL에서 유의한 차이가 있었다(p<0.05). 6. 유치 법랑질과 영구치 법랑질 간에는 모든 접착제에서 유의한 차이가 없었으나,유치 상아질과 영구치 상아질 간에는 SM과 SB에서 유의한 차이가 있었다(p<0.05).

Technology Development Process in a Developing Country; A Model based on New Gloval Perspectives

Choi, Dong Kyu崔棟圭 숭실대학교 1988 中小企業論文集 Vol.2 No.1

A Study on Storage of a Major Herbal Medicine Material, Peucedani Radix

Choi,Seong-Kyu,Yun,Kyeong-Won,Kwon,Byung-Sun 한국자원식물학회 2002 Plant Resources Vol.5 No.2

To develop optimal storage method of root of Peucedani Radix, which has been grown as major cultural herbal medicine material, root of Peucedani Radix was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. Conclusively vacuum packing and complete sealing with polyethylene film appears to be optimal for storage of Peucedani Radix.

A Basic Study on Leaf and Stem Production of Angelica acutiloba

Choi,Seong-Kyu,Yun,Kyeong-won,Chon,Sang-Uk,Lee,Jong-Ill,Seo,Young-Nam,Seo,Kyoung-Sun,Choi,Kyeong-Ju 한국자원식물학회 2004 Plant Resources Vol.7 No.3

This study was conducted to develop effective production system in greenhouse for leaves and stems of Angelica acutiloba by using connect pots in 2003 and 2004. Seed germination rate and plant biomass of Angelica acutiloba collected in 2004 were higher than those harvested in 2003. Germination rate of Angelica acutiloba seeds collected in 2003 was 10%, while germination rate of seeds collected in 2004 was above 90%. Especially, plant growth and yield of Angelica acutiloba grown in connect pots sized with 4×4×5cm(length×width×height) were the highest. These results indicate that leaf and stem production of Angelica acutiloba can be improved by using connect pots and optimizing seed collecting time in greenhouse.

Study on Leaf Production of Angelica acutiloba by Mulching with Polyethylene Film

Choi,Seong-Kyu,Yun,Kyeong-Won,Chon,Sang-Uk,Seo,Young-Nam,Seo,Kyoung-sun,Kwon,Byung-Sun 한국자원식물학회 2003 Plant Resources Vol.6 No.3

This study was conducted to produce effectively more leaves of Angelica acutiloba through year-round production system by using various mulching materials and polyethylene(PE) tunnel. Soil temperature by covering treatment was higher in PE mulching and PE tunnel than in rice straw mulching, especially showing the highest temperature in PE tunnel from April through May. Water content of soil was higher in PE mulching than in non-mulching. Leaf production of Angelica acutiloba through year-round production showed the highest in PE tunnel and root production in PE mulching. These results suggest that leaf production of Angelica acutiloba can be maximized through PE tunnel cultivation system.

Temperature Effect on Seed Germination and Seedling Growth of Angelica acutilobu

Choi,Seong-Kyu,Yun,Kyeong-Won 한국자원식물학회 2002 Plant Resources Vol.5 No.3

Special objective of this study is to investigate morphological characteristics of seeds and effects of environmental factors such as light and temperature on their germination and seedling growth of Angelica acutilobu in Umbelliferae plants, using them as oriental medicine materials. Seed shape of Angelica acutilobu is ovate. Color of seed coats varied from yellow to dark brown. Seed size was 5.5 mm in length, 4.0mm in width. One thousand-seed weight of Angelica acutilobus was 3,210mg. Optimum temperatures for seed germination and seedling growth ranged from 20 to 25℃

Effect of Temperature on Seed Germination and Seedling Growth of Peucedanum japonicum Thunberct

Choi,Seong-Kyu 한국자원식물학회 2003 Plant Resources Vol.6 No.1

The objective of this study is to investigate morphological characteristics of seeds and effects of environmental factors such as light and temperature on the germination and seedling growth of Peucedanum japonicum Thunberct, Which belongs to Umbelliferae and useful for on oriental medicine materials. Seed shape of Peucedanum japonicum Thunberct is ovate. Color of seed coats varied from yellow to dark brown. Seed size is 5.3mm in length, 4.2mm in width. One thousand-seed weight of Peucedanum japonicum Thunberct is 4,010mg. Optimum temperatures for seed germination and seedling growth range from 20 to 25℃

Effect of Packing Condition of Polyethylene film on Storage of a Major Herbal Medicine Material, Anemarrhena Rhizome

Choi,Seong-Kyu 한국자원식물학회 2003 Plant Resources Vol.6 No.1

To develop optimal storage method of root of Anemarrhena Rhizome, which has been grown as major cultural herbal medicine material, root of Anemarrhena Rhizome was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The rot ratio of root during the storage period was not significantly different among packing materials but was significantly different among sealing conditions. Conclusively vacuum packing and complete sealing with polyethylene film appears to be optimal for storage of Anemarrhena Rhizome.

Effect of Storage Condition on Yield and Quality of Angelica acutiloba Radix

Choi,Seong-kyu,Yun,Kyeong-Won,Chon,Sang-Uk,Seo,Young-nam 한국자원식물학회 2002 Plant Resources Vol.5 No.1

To develop an optimal storage method of root of Angelica acutiloba Radix, which has been grown as major herbal medicine material to be cultivated, root of Angelica acutiloba Radix, was stored for 10 months with different packing materials and sealing methods. The loss in dry weight as influenced by packing materials and sealing methods was the lowest at vacuum packing and followed by complete sealing methods with transparent polyethylene film. The ratio of root rot during the storage period was not significantly different between packing materials but was significantly different between sealing conditions. In conclusion, vacuum packing and complete sealing with polyethylene film appears to be most optimal for storage of Angelica acutiloba Radix.

Growth Characteristics of Dendropanax morbifera in Chonnam

Choi,Seong-Kyu,Yun,Kyeong-Won,Lee,Jong-Il 한국자원식물학회 2002 Plant Resources Vol.5 No.2

This study was carried out obtain basic information for growth characteristics by different age of Dendropanax morbifera in chonnam, such as Yosu, Sunchon, Haenam, Gangjin, Wando. The pH of soil in cultivation area was 5.2 to 5.6 and organic matter was very high up to 10.6% . P205 content of soil in cultivation area was 35.3 to 42.1 mg/L, C.E.S was 13.9 to 14.4 me/100g, and moisture rate was 19.2 to 21.1 % . The flowering of Dendropanax morbifera began from 6~7 years old tree. The flowering date was at 10th of July at Wando. The growth characteristics of 12 years old tree was 929.5cm in stem height, 134.1mm in stem diameter, and 15 years old tree was 1,117.9cm in stem height, 160.8mm in stem diameter. The number of leaf was 13.9 at five years old tree, and the petioles length was 12.6 at five years old tree. Xylem sap can be had at more than 10 years old tree with good growth more than 10 em stem diameter.