http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Study on Residual Stress Distributions in Press-Braked Stainless Steel Sections
Baofeng Zheng,Gan-Ping Shu,Qinglin Jiang 한국강구조학회 2019 International Journal of Steel Structures Vol.19 No.5
The distribution of residual stresses is one of the substantial issues in determining mechanical behaviors of stainless steel structural members. Proper residual stress distribution models are necessary to include the residual stress infl uence in the analysis and design. Currently, the existing residual stress distribution model for press-braked stainless steel sections is either relatively complicated for the application, or only focuses on the longitudinal residual stress. In this study, a simplifi ed residual stress distribution model was proposed based on the analysis of the key mechanisms in the press-braking process that was assumed as two-stage (bending and rebounding) plane strain pure bending process. The stress–strain relationship was represented as a simplifi ed three–stage material model, and all the minor eff ects like the coiling and uncoiling, the material anisotropy, and the shift of neutral axis, etc. were neglected. Compared with test data, the predicted results by the proposed simplifi ed model indicate good agreement for specimens within the commonly used ratio of internal corner radius over the thickness ( r i / t ). Finite element models for the press-braking process were then developed in ABAQUS and validated using the available data from literature. A series of models with varied ratios of r i / t were analyzed. Simulation results indicate that the center of the corner region in the press-braked sections has the largest equivalent plastic strain and residual stresses. From the center to the edge, the equivalent plastic strain and residual stresses declined signifi cantly. As the ratios of r i / t become smaller and smaller, the neutral axis moves towards to the compression side and the proposed simplifi ed model gradually loses its prediction accuracy. Based on the theoretical and fi nite element analysis, the proposed simplifi ed model is applicable for press-braked stainless steel sections with r i / t ratios higher than 2.0.
Material Enhancement Model for Austenitic Stainless Steel Sheets Subjected to Pre-stretching
Baofeng Zheng,Gan-Ping Shu,Rui-Hua Lu,Qinglin Jiang 한국강구조학회 2019 International Journal of Steel Structures Vol.19 No.5
Austenitic stainless steel has considerable strain hardening property, which can be utilized in the design of cold-formed stainless steel structures to eff ectively reduce project costs. Pre-stretching is a simple and fundamental cold-forming process. Material enhancement model developed for pre-stretching lays a basis for characterizing material properties in more complicated cold-forming process(e.g. cold-rolling and press-braking). In this study, a series of material tensile tests were performed to develop material enhancement models for austenitic stainless steel sheets subjected to pre-stretching. Austenitic stainless steel sheets were tensioned in six diff erent levels to introduce cold working into the sheets. Material properties of the sheets in two directions (i.e. along and perpendicular to the pre-stretching direction) were obtained through coupon tensile tests. To facilitate the development of the material enhancement models, a simplifi ed three-stage material model with six independent parameters was proposed. Enhancement model for each material parameter was developed with the plastic strain experienced in the pre-stretching process as a key factor. Key material parameters and full-range stress–strain curves at diff erent levels of pre-stretching were generated based on the proposed and the available predictive models in literatures. Comparisons of the generated material parameters and the stress–strain curves with the test ones show good agreement.
Theoretical analysis of overlay resisting crack propagation in old cement concrete pavement
Baofeng Pan,Yuanyuan Gao,Yang Zhong 국제구조공학회 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.4
The main purpose of this study is to determine the effect of overlay on the crack propagation. In order to simplify the problem, a cement concrete pavement is modeled as an elastic plate on Winkler foundation. To derive the singular integral equations, the Fourier transform and dislocation density function are used. Lobatto-Chebyshev integration formula, as a numerical method, is used to solve the singular integral equations. The numerical solution of stress intensity factor at the crack tip is derived. In order to examine the effect of overlay for resisting crack propagation, numerical analyses are carried out for a cement concrete pavement with an embedded crack and a concrete pavement with an asphalt overlay. Results show the significant factors that influence the crack propagation.
Theoretical analysis of overlay resisting crack propagation in old cement concrete pavement
Pan, Baofeng,Gao, Yuanyuan,Zhong, Yang Techno-Press 2014 Structural Engineering and Mechanics, An Int'l Jou Vol.52 No.4
The main purpose of this study is to determine the effect of overlay on the crack propagation. In order to simplify the problem, a cement concrete pavement is modeled as an elastic plate on Winkler foundation. To derive the singular integral equations, the Fourier transform and dislocation density function are used. Lobatto-Chebyshev integration formula, as a numerical method, is used to solve the singular integral equations. The numerical solution of stress intensity factor at the crack tip is derived. In order to examine the effect of overlay for resisting crack propagation, numerical analyses are carried out for a cement concrete pavement with an embedded crack and a concrete pavement with an asphalt overlay. Results show the significant factors that influence the crack propagation.
Huang, Baofeng Korean Nuclear Society 2021 Nuclear Engineering and Technology Vol.53 No.7
The Pacific Earthquake Engineering Research (PEER) Center has been developing a performance-based earthquake engineering (PBEE) methodology, which is based on explicit determination of performance, e.g., monetary losses, in a probabilistic manner where uncertainties in earthquake ground motion, structural response, damage estimation, and losses are explicitly considered. To carry out the PEER PBEE procedure for a component of the nuclear power plant (NPP) such as the cable tray system, hazard curve and spectra were defined for two hazard levels of the ground motions, namely, operation basis earthquake, and safe shutdown earthquake. Accordingly, two sets of spectral compatible ground motions were selected for dynamic analysis of the cable tray system. In general, the PBEE analysis of the cable tray in NPP was introduced where the resulting floor motions from the time history analysis (THA) of the NPP structure should be used as the input motion to the cable tray. However, for simplicity, a finite element model of the cable tray was developed for THA under the effect of the selected ground motions. Based on the structural analysis results, fragility curves were generated in terms of specific engineering demand parameters. Loss analysis was performed considering monetary losses corresponding to the predefined damage states. Then, overall losses were evaluated for different damage groups using the PEER PBEE methodology.