http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : Arne Jansseune (검색결과 3 건)
- 무료
- 기관 내 무료
- 유료
-
Influence of the cylinder height on the elasto-plastic failure of locally supported cylinders
Arne Jansseune,Wouter De Corte,Wesley Vanlaere,Rudy Van Impe 국제구조공학회 2012 Steel and Composite Structures, An International J Vol.12 No.4
Frequently, steel silos are supported by discrete supports or columns to permit easy access beneath the barrel. In such cases, large loads are transferred to the limited number of supports, causing locally high axial compressive stress concentrations in the shell wall above the supports. If not dealt with properly, these increased stresses will lead to premature failure of the silo due to local instability in the regions above the supports. Local stiffening near the supports is a way to improve the buckling resistance, as material is added in the region of elevated stresses, levelling these out to values found in uniformly supported silos. The aim of a study on the properties of local stiffening will then be to increase the failure load, governed by an interaction of plastic collapse and elastic instability, to that of a discrete supported silo. However, during the course of such a study it was found that, although the failure remains local, the cylinder height is also a parameter that influences the failure mechanism, a fact that is not properly taken into account in current design practice and codes. This paper describes the mechanism behind the effect of the cylinder height on the failure load, which is related to pre-buckling deformations of the shell structure. All results and conclusions are based on geometrically and materially non-linear finite element analyses.
-
Elastic Failure of Locally Supported Silos with U-shaped Longitudinal Stiffeners
Arne Jansseune,Wouter De Corte,Jan Belis 대한토목학회 2015 KSCE JOURNAL OF CIVIL ENGINEERING Vol.19 No.4
For practical considerations, thin-walled steel silos are often supported by a limited number of discrete equidistant supports around their circumference. In such cases, large loads are transferred to the limited number of supports, causing locally high axial compressive stress concentrations. A possible solution is to add a partial-height U-shaped longitudinal stiffener above each support. Such stiffeners create a more gradual transmission of vertical loads to the supports, increasing the maximum failure load. This paper aims to map the influence of the dimensions of such longitudinal stiffeners on the failure behaviour of a thin-walled silo. Both the parameters of the cross-section and the height of the stiffeners are discussed. All the results and the findings are based on geometrically and material nonlinear analyses - GMNA - performed with finite element software. The simulations indicate that, in general, thin-walled silos will fail by pure elastic buckling in the unstiffened silo wall above the terminations of the longitudinal stiffeners. However, this is only true if the cross-section of the stiffeners, and to a lesser degree the moment of inertia, is sufficiently large in order that the longitudinal stiffeners can absorb the supporting loads. In contrast, for longitudinal stiffeners with a small cross-section, the silo structure will fail by premature elasto-plastic collapse of the stiffeners itself at significantly lower load levels. Furthermore, the height of the stiffeners and the degree of support - the circumferential width of the supports and the stiffeners is equal to each other - are the most important geometrical parameters which are beneficial to reach a maximum load level for a specific silo. Finally, the buckling behaviour and the failure load are hardly influenced by radial width and the thickness of the longitudinal stiffeners.
-
The influence of convoy loading on the optimized topology of railway bridges
Arne Jansseune,Wouter De Corte 국제구조공학회 2017 Structural Engineering and Mechanics, An Int'l Jou Vol.64 No.1
This paper presents the application of topology optimization as a design tool for a steel railway bridge. The choice of a steel railway bridge is dictated by the particular situation that it is suitable for topology optimization design. On the one hand, the current manufacturing techniques for steel structures (additive manufacturing techniques not included) are highly appropriate for material optimization and weight reduction to improve the overall structural efficiency, improve production efficiency, and reduce costs. On the other hand, the design of a railway bridge, especially at higher speeds, is dominated by minimizing the deformations, this being the basic principle of compliance optimization. However, a classical strategy of topology optimization considers typically only one or a very limited number of load cases, while the design of a steel railway bridge is characterized by relatively concentrated convoy loads, which may be present or absent at any location of the structure. The paper demonstrates the applicability of considering multiple load configurations during topology optimization and proves that a different and better optimal layout is obtained than the one from the classical strategy.
연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
