http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Aniline Terminated Waterborne Polyurethane과 PEDOT/PSS의 블렌딩에 의한 대전방지 코팅용액의 제조
홍민기 ( Min Gi Hong ),허우영 ( Woo Young Huh ),변태강 ( Tae Gang Byun ),송기창 ( Ki Chang Song ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.4
Polyurethane prepolymers were prepared from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid. Then, aniline terminated waterborne polyurethane dispersion (ATPUD) was synthesized by capping the NCO group of the prepolymer with aniline monomer. Subsequently, ATPUD and waterborne polyurethane dispersion (PUD), respectively, were blended with conducting polymer, poly (3,4-ethylenedioxythiophene)/polystyrene sulfonate [PEDOT/PSS], to yield antistatic coating solutions, and the mixture was coated on the polycarbonate substrates. At adequate addition amounts of PEDOT/PSS less than or equal to 2.5 g, the surface resistances (1.0×1011~2.5×108 Ω/ cm2) of coating films from ATPUD showed better electronic conductivities than those (5.0×1011~6.3×109 Ω/cm2) from PUD. However, at excess amount of PEDOT/PSS of 3.0 g, the surface resistance from ATPUD showed similar electronic conductivity with that from PUD.
보문: 공업화학(전기화학, 분석화학 포함)·촉매/반응공학·약물전달기술·기능성 코팅기술 ; 알카리 금속염으로부터 대전방지용 수분산 폴리우레탄 코팅용액 제조
홍민기 ( Min Gi Hong ),김병석 ( Byung Suk Kim ),이용운 ( Yong Yong Lee ),송기찬 ( Ki Chang Song ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.3
Poly (carbonate diol)과 isophrone diisocyanate 그리고 dimethylol propionic acid로 부터 NCO/OH 몰 비를 0.8, 1.1, 1.3으로 각각 조절하여 수분산 폴리우레탄(waterborne polyurethane dispersion, PUD)을 합성하였다. 이 용액에 알카리 금속염인 LiClO4, NaClO4, KClO4를 첨가하여 대전방지용 수분산 폴리우레탄 코팅 용액을 제조하였다. 이 과정에서 첨가되는 알카리 금속염의 첨가량과 종류가 코팅 도막의 표면저항에 미치는 영향을 살펴보았다. 알카리 금속염의 첨 가량이 증가될수록 코팅 도막의 표면저항은 감소하였다. 그러나 PUD에 같은 양의 알카리 금속염이 첨가될 경우에는 LiClO4>NaClO4>KClO4의 순서로 코팅 도막의 이온 전도도가 우수함을 알 수 있었다. 또한 PUD 내의 NCO/OH 몰 비 가 증가함에 따라 코팅 도막의 표면저항이 증가하여 이온 전도도가 감소하였다. Waterborne polyurethane dispersions (PUD) were synthesized from poly (carbonate diol), isophrone diisocyanate and dimethylol propionic acid at different NCO/OH molar ratios. Subsequently, the PUD was mixed with different types of alkali metal salts (LiClO4, NaClO4, and KClO4) to prepare antistatic waterborne polyurethane coating solutions. Effects of the types and amounts of alkali metal salts were investigated on the surface resistances of the resulting coating films. The surface resistances of coating films were decreased with increasing the amounts of alkali metal salts added in the PUD. The coating films prepared with the same amount of alkali metal salts showed increased ionic conductivity with the order of LiClO4>NaClO4>KClO4. Also, the surface resistances of coating films were increased with increasing the molar ratios of NCO/OH in the PUD.
Colloidal Silica를 이용한 Silylated Waterborne Polyurethane/Silica Nanocomposite의 제조
홍민기 ( Min Gi Hong ),신용탁 ( Yong Tak Shin ),최진주 ( Jin Joo Choi ),이원기 ( Won Ki Lee ),이경배 ( Gyoung Bae Lee ),유병원 ( Byung Won Yoo ),이명구 ( Myung Goo Lee ),송기창 ( Ki Chang Song ) 한국화학공학회 2010 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.48 No.5
MOBA 게임 장르에서의 캐릭터 재미 요소에 관한 연구
홍민기(Min-Gi Hong),박종범(Jong-Beom Park),김효남(Hyo-Nam Kim) 한국컴퓨터정보학회 2020 한국컴퓨터정보학회 학술발표논문집 Vol.28 No.1
게임에서의 캐릭터는 플레이어와 게임을 연결해주는 중요한 역할을 하며, 더 나아가 게임의 재미를 느끼는 데 필요한 요소 중 하나이다. 본 논문에서는 최근 대표적으로 인기를 끌고 있는 MOBA 장르의 게임인 리그 오브 레전드, 오버워치, 히어로즈 오브 더 스톰, 사이퍼즈 총 4개 게임의 캐릭터와 역할에 대한 재미를 분석하여 공통적인 재미 요소를 정리하고 설문 조사를 통해 유저들의 선호도를 파악하여 앞으로 게임 캐릭터 기획 제작에 대해 도움을 주고자 한다.
홍민기 ( Min Gi Hong ),김병석 ( Byung Suk Kim ),송기창 ( Ki Chang Song ) 한국화학공학회 2012 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.50 No.3
Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로부터 제조된 polyurethane prepolymer의 말단 NCO기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATWPUD)을 합성하였다. 이 ATWPUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합시켜 전도성 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 막을 형성하였다. ATWPUD와 MWCNT를 혼합하여 얻어진 코팅 막의 표면저항 값은 107.6~107.7Ω/cm2로 순수한 waterborne polyurethane dispersion (WPUD)과 MWCNT의 혼합 물로부터 제조된 코팅 막의 1010.9Ω/cm2 보다 우수한 전기전도도를 나타내었다. 또한 ATWPUD에 첨가되는 MWCNT 의 양이 증가될수록 코팅 막의 전기전도도는 증가하였지만 연필경도 및 부착력은 감소되었다. Polyurethane prepolymers were prepared from poly (carbonate diol), isophrone diisocyanate, and dimethylol propionic acid. Then, aniline terminated waterborne polyurethane dispersion (ATWPUD) was synthesized by capping aniline on the NCO group of the prepolymer. Subsequently, ATWPUD was mixed with multi-walled carbon nanotube (MWCNT) to yield coating solutions, and the mixture was coated on the polycarbonate substrate. The surface resistance (107.6~107.7Ω/cm2) of coating films from ATWPUD showed better conducting properties than that (1010.9Ω/cm2) from pure waterborne polyurethane dispersion (WPUD) when MWCNT was mixed. Also, the surface resistance of coating films was increased, but the pencil hardness and adhesion were decreased with increasing the amount of MWCNT added in the ATWPUD.