http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전중성,Jeon Joong-Sung 한국마린엔지니어링학회 2005 한국마린엔지니어링학회지 Vol.29 No.6
In this paper, we have compared and analyzed the performance of high amplifier using Doherty technique to improve linearity and efficiency of base station and repeater Power amplifier for WCDMA. This Doherty amplifier implements with 3dB branch line coupler and $90^{\circ}C$ transmission line The phase offset line is designed to maintain the high linearity and efficiency at the low efficiency Period of the power amplifier CW 1-tone experimental results at the WCDMA frequency $2.11{\sim}2.17GHz$ shows that Doherty amplifier which achieves power add efficiency(PAE) of 50% at 6dB back off the point from maximum output power 52.3 dBm, obtains higher efficiency of 13.3% than class AB Finding optimum bias Point after adjusted gate voltage, Doherty amplifier shows that $IMD_3$ improves 4dB.
온도변화에 따른 LDMOS의 전류변동 억제에 관한 연구
전중성,Jeon, Joong-Sung 한국마린엔지니어링학회 2006 한국마린엔지니어링학회지 Vol.30 No.8
In this paper, the power amplifier using active bias circuits for LDMOS(Lateral Diffused Metal Oxide Semiconductor) MRF-21180 is designed and fabricated. According to change the temperature, the gate voltage of LDMOS is controlled by the fabricated active bias circuits which is made of PNP transistor to suppress drain current. The driving amplifier using MRF-21125 and MRF-21060 is made to drive the LDMOS MRF-21180 power amplifier. The variation of current consumption in the fabricated 60 watt power amplifier has an excellent characteristics of less than 0.1 A, whereas a passive biasing circuit dissipates more than 0.5 A. The implemented power amplifier has the gain over 9 dB, the gain flatness of less than $\pm$0.1 dB and input and output return loss of less than -6 dB over the frequency range 2.11 $\sim$ 2.17 GHz. The DC operation point of this power amplifier at temperature variation 0 $^{\circ}C$ to 60 $^{\circ}C$ is fixed by active bias circuit.
도허티 이론을 이용한 무선 네트워크 및 중계기용 전력증폭기의 효율 향상에 관한 연구
전중성,최동묵,Jeon Joong Sung,Choi Dong Muk 한국정보통신학회 2005 한국정보통신학회논문지 Vol.9 No.2
본 논문에서는 무선 네트워크 장비에도 적용 가능한 WCDMA 중계기용 전력증폭기의 선형성 및 효율을 향상시키기 위한 도허티증폭기를 구현하였다. 입력 전력의 변화에 따라 고효율 전력증폭기를 구현하고자 능동 로드풀을 이용한 도허티 기술을 이용하고 기존의 증폭기의 낮은 효율 구간에서도 우수한 선형성과 고효율을 유지하도록 설계하였다. WCDMA 주파수 대역인 2.11$\~$2.17 CHz에서 CW 1-tone 실험 결과 치대 출력 전력 52.3 dBm에서 6dBm 백 오프 지점부터 50$\%$의 전력 부가 효율을 갖게 하여 기존의 AB급에 비해 13.3$\%$ 이상의 높은 효율을 가졌다. 또한 게이트 바이어스 조절을 통하여 선형성 개선의 최적 바이어스 점을 찾은 후 도허티증폭기에서는 4dB 이상의 IMD3가 개선됨을 알 수 있었다. In this paper, Doherty amplifier is designed by the need of improving the linearity and efficiency of wireless network and repeater for WCDMA. It is designed to maintain the high linearity and efficiency at the low efficiency period of the power amplifier after analyzing Doherty technique using the active load-pull in condition of the high efficiency power amplifier implementation according to the variation of input power. CW 1-tone experimental results at the WCDMA frequency 2.11$\~$2.17 CHz shows that Doherty amplifier, which achieves pore. add efficiency(PAE) 50$\%$ at 6dB back off the point from maximum output power 52.3dBm, obtains higher efficiency of 13.3$\%$ than class AB. finding optimum bias point after adjusted gate voltage, Doherty amplifier shows that IMD3 improves 4dB.
광대역 디지털TV 중계기용 100 Watt 고출력증폭기의 구현 및 특성 측정에 관한 연구
전중성,Sung, Jeon-Joong 한국마린엔지니어링학회 2007 한국마린엔지니어링학회지 Vol.31 No.5
In this paper, a 100 Watt high power amplifier has been implemented and performed evaluation, which is operating at UHF band ($470\;{\sim}\;806\;MHz$) for Digital TV repeater. To achieve increase of bandwidth and high power capability, 3-way power combiner and divider of Wilkinson type was adopted. In order to measure the fabricated 100 Watt power amplifier, the estimation technique function which makes equivalent mask was used. As a result of the measurement, the existence of pilot signal is confirmed and the signal transmitted at the rated output power 100 Watt is brought out the flat feature through 6 MHz bandwidth. and it resulted that its value was less than -47 dB at the edge of radiation channel and less than -110 dB at more than 6 MHz position from channel edge.
L-band 위성통신 시스템을 위한 극소형 25 Watt 고출력증폭기에 관한 연구
전중성(Joong-Sung Jeon),예병덕( Byeong-Duck Ye),김동일(Dong-Il Kim) 한국항해항만학회 2002 한국항해항만학회지 Vol.26 No.1
본 논문에서는 hybrid 기법을 이용하여 INMARSAT 위성의 상향 주파수인 L-BAND(1.6265~1.6465 ㎓)에서 동작하는 위성단말기용 25 Watt C급 고출력증폭기를 설계ㆍ제작하였다. 제작의 간편성을 위해서 전력증폭기를 크게 구동증폭단과 전력증폭단으로 나누어 구현하였으며, 전력증폭단을 구동하기 위한 구동단은 Motorola사의 MRF-6401을 사용하여 2단으로 구성하였고, 전력증폭단은 MRF-16006과 MRF-16030을 사용하였다. 또 각 부에 직류 전원을 공급하기 위해 바이어스 회로부를 같은 하우징 내에 장착하여 무게 및 부피를 최소화하였다. 제작된 고출력증폭기는 20 ㎒ 대역폭 내에서 이득이 30 ㏈ 이상, 입ㆍ출력 정재파비는 1.7 이하의 특성을 가졌다. 1.635 ㎓ 주파수에 대해 1 ㏈ 압축점의 출력전력은 44 ㏈m으로서 설계시 목표로 했던 출력전력 25 Watt를 상회하였다. 본 논문에서 제시한 SSPA(Solid State Power Amplifier) 제작 기법은 각종 Radar 및 SCPC(Signal Channel Per Carrier)용 전력증폭기 설계 및 제작에도 적용할 수 있다. The 25 Watt hybrid MIC SSPA has been developed in the frequency rang from 1.6265 ㎓ to 1.6465 ㎓ for uplink of INMARSAT’s earth station. To simplify the fabrication process, the whole system is designed of two parts composed of a driving amplifier and a power amplifier. The Motorolas MRF-6401 is used for driving part, the Motorolas MRF-16006 and MRF-16030 is used the power amplifier. We reduced weight and volume of high power amplifier through arranging the bias circuits in the same housing. The realized SSPA has more than 30 ㏈ for gain within 20 ㎒ bandwidth, and the voltage standing wave ratios(VSWR) of input and output port are less than 1.7, respectively. The output power of 44 ㏈m is achieved at the 1 ㏈ gain compression point of 1.6365 ㎓. These results reveal a high power amplifier of 25 Watt which is the design target. The Proposed SSPA manufacture techniques in this paper can be applied to the implementation of high power amplifiers for some radars and SCPC.