http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이헌민,이진경,유재명,신현목,Lee, Heon-Min,Lee, Jin-Kyoung,Yoo, Jae-Myoung,Shin, Hyun-Mock 한국전산구조공학회 2011 한국전산구조공학회논문집 Vol.24 No.4
국내 토목분야의 건설산업에서는 비효율적인 의사소통으로 인하여 발생하는 업무전환 단계에서의 정보누락 및 그로 인한 비용손실 등의 문제점을 해소시키기 위한 획기적인 해결책으로 BIM의 도입이 대두되고 있다. BIM은 구조물의 생애주기 전 단계에서 발생되는 모든 정보들을 3차원 파라메트릭 CAD와 연계된 3차원 정보모델을 통하여 관리하여 정보활용의 효율성을 극대화시킨다. 본 논문에서는 BIM기반의 교량건설 프로젝트의 구조설계 업무에서 사용할 목적으로 강상자형 교량의 3차원 정보모델을 활용한 내진해석 프로세스를 제안하였다. 또한 3차원 정보모델의 속성정보들이 구조적 데이터를 내재할 수 있도록 하기 위하여 3차원 모델링작업이 구조설계 업무를 통하여 결정되는 정보들을 활용하여 이루어질 수 있도록 하는 프로세스를 제안하였다. 제시된 프로세스는 현재 건설이 진행 중인 강상자형 교량을 적용하여 구성하였다. 또한 프로세스를 적용하여 내진해석의 최종 산출물인 내진계산서의 도출이 가능하다. The communication of each others is lack between planing, design, construction and maintenance in domestic construction industry. This problem makes the omission of information and the loss of cost. So, the introduction of BIM can be the solution about that. BIM manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. This is done through 3D information model associated with a three-dimensional(3D) parametric CAD. This study proposes the seismic analysis process of steel box bridge for structural design of bridge construction project based on BIM. The additional process is needed for the purpose that structural data is inherent in the property information of 3D information model. This process has 3D modeling progress done by using the information decided in design phase. The design document of seismic analysis can be derived with the proposed process to steel box bridge.
교통 인프라 시설의 BIM을 위한 LOG 특정 방법 연구
이헌민(Heon-Min Lee),김현승(Hyeon-Seung Kim),이일수(Il-Soo Lee) 한국산학기술학회 2021 한국산학기술학회논문지 Vol.22 No.11
BIM의 확산과 정착을 위한 선결 과제는 디지털 모델의 형상 제작에 대한 표준을 정립하는 것이다. 이러한 모델제작의 표준은 형상에 대한 상세수준을 고려하여 정립해야 한다. 따라서 본 연구에서는 교통인프라 시설을 대상으로 소프트웨어의 종류나 시설의 유형 및 규모에 관계없이 디지털 모델의 형상에 대한 상세 수준을 명확히 정의할 수 있는 방법을 제시하였다. 디지털 모델은 객체의 구성을 기준으로 유닛과 어셈블리로 그 유형을 구분하였으며 각 유형에 적합한 LOG 특정 방법을 제시하였다. 제시된 방법의 검증을 위하여 철도의 궤도 시설을 예시로 LOG를 특정하였으며 적용성 평가를 위하여 설문조사 수행하였다. 그 결과 시설의 형상이나 규모 및 구성에 관계없이 명확하게 LOG를 특정할 수 있을 뿐 아니라 다른 BIM 요소기술의 개발에 유용하게 활용될 수 있을 것으로 평가되었다. 본 연구에서 제시한 LOG 특정 방법을 활용하면 발주처에서는 디지털 모델의 요구 상세 수준에 대하여 좀 더 간결하고 명확하게 표현된 문서를 제작 할 수 있을 것으로 기대된다. The prerequisite for the spread and settlement of BIM is the establishment of standards for the shape modeling of digital models. It is also important that the level of geometry be reflected in this standard. Therefore, this study proposed a method for clearly defining the level of geometry of the digital model regardless of the type of software or the type and size of the transportation infrastructure facilities considered as the cases for the present study. Digital models were divided into units and assemblies based on the composition of the objects, and LOG-specific methods were proposed for each type. The proposed method was verified by specifying the LOG for an example case of the railroad trajectory facility. In addition, a survey was conducted to evaluate the applicability of this method. The evaluation result showed that the LOG could be clearly specified regardless of the facility"s shape, size, and configuration. It was evaluated that this method could be used in the development of other BIM elemental technologies. By using the LOG-specific method presented in this study, it is expected that the client will be able to produce a more concise and clearly expressed document on the level of demand details of the digital model.
건설정보모델의 속성입력 간소화에 관한 연구-Ⅱ : 구조계산식이 반영된 옹벽 변수모델의 개발
이헌민(Heon-Min Lee),김현승(Hyeon-Seung Kim),이일수(Il-Soo Lee) 한국산학기술학회 2023 한국산학기술학회논문지 Vol.24 No.2
본 연구의 목표는 구조 계산 정보를 계산하여 속성에 자동으로 반환시켜 줄 수 있는 옹벽에 대한 BIM 변수 모델을 개발하는 것이다. 이를 위하여 이러한 BIM 변수 모델을 스크립트 언어로 개발하고 올바른 결과가 도출되는지 검증하였다. 본 연구를 통하여 개발된 변수 모델의 주요 기능은 다음의 세 가지로 요약될 수 있다. 첫 번째, 사용자가 입력한 설계 변수에 의하여 철근을 포함한 옹벽의 3차원 모델이 실시 설계 수준으로 구축된다. 두 번째, 옹벽의 3차원 모델이 구축됨과 동시에 현행 구조계산서에 존재하는 모든 설계 검토 정보들이 자동으로 계산되며 이 값들은 속성으로 자동 반환된다. 세 번째, 단면이 변화하는 구간의 어느 위치에서나 옹벽의 안정 검토와 단면 검토를 수행할 수 있다. 본 연구에서 제시하는 BIM 변수 모델 개발 방식을 활용하면 이미 설계가 완료된 2차원 도면으로 3차원 모델을 다시 제작하는 기존의 BIM 전환 설계에서 벗어나 건설정보모델 자체를 구조 계산 도구와 성과품으로 활용하는 BIM 전면 설계가 가능할 것으로 기대된다. The purpose of this study was to develop a parametric building information model (BIM) for retaining walls that can calculate structural calculation information and automatically return it as attributes. The parametric BIM was developed in a scripting language, and we verified that the correct results were derived. The three main functions of the model can be summarized as follows. First, a 3D model of a retaining wall, including rebar, is constructed at the design level by user input of design variables. Second, as the 3D model of the retaining wall is built, all design review information in current structural computation documents is automatically calculated, and the dependent variable assigned to these values is automatically returned as an attribute. Third, it is possible to perform a stability review and a cross-sectional review of the retaining wall at any position in the section where the cross section changes. Using the method presented, it is expected that the building information model can be used as a structural calculation tool and design product rather than existing BIM conversion design, in which 3D models are recreated with completed 2D drawings.