http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
금속성 함체의 개구부에 적용된 전자파 흡수체에 의한 차폐효과 개선
권종화(Jong Hwa Kwon),형창희(Chang Hee Hyoung),황정환(Jung-Hwan Hwang),박현호(Hyun Ho Park) 한국전자파학회 2023 한국전자파학회논문지 Vol.34 No.5
본 연구는 흡수체를 사용하여 개구부가 있는 함체의 차폐효과를 개선하는 방법을 제시하였다. 흡수체는 개구부가 있는 함체의 내부에 배치되어 개구부를 통해 입사하는 전자파가 흡수체를 통과하면서 감쇠되고, 함체의 공동효과로 발생하는 전자파 역시 흡수체에 의해 감소되어 차폐효과가 향상된다. 제시한 구조는 3차원 수치해석을 통해 차폐효과가 개선됨을 확인하였다. This study introduced a method for enhancing the shielding effectiveness of an enclosure with apertures using an absorber. The absorber was installed on the inner surface of the aperture of the enclosure and attenuated incident electromagnetic waves as they passed through it. Furthermore, the absorber reduced the standing waves generated inside the enclosure owing to the cavity effect, improving shielding effectiveness. A 3D numerical analysis confirmed that the proposed structure enhanced the shielding effectiveness of the enclosure.
이중 RC 브랜치 회로를 활용한 고고도 전자기파 펄스 발생기의 등가회로 모델링 및 설계
문재식(Jaesik Moon),권종화(Jong Hwa Kwon),송익환(Eakhwan Song) 한국전자파학회 2021 한국전자파학회논문지 Vol.32 No.8
본 논문에서는 고고도 전자기파 펄스 (HEMP, high-altitude electromagnetic pulse) 전도성 방해 내성평가 수행 시 노이즈 소스로 사용되는 이중 지수 펄스 발생기의 등가회로모델을 제안한다. 또한 제안된 등가회로 모델을 이용하여 HEMP 전도성 방해 내성 평가의 다양한 소스 펄스 요구조건을 만족하는 이중 지수 펄스 발생기의 설계법을 제안하였다. 제안된 등가회로 모델을 설계하기 위해서 등가회로모델과 소스 펄스 요구조건 간의 관계를 도출하였다. 제안된 등가회로모델은 HEMP 내성평가 표준에서 제시된 다양한 테스트 모드에 적용되었으며, 인쇄회로기판에 제작된 시료의 측정 결과와 높은 정합성을 보이며 실험적으로 검증되었다. In this study, an equivalent circuit model of a double exponential pulse generator used as a noise source in a high-altitude electromagnetic pulse (HEMP) conductive disturbance immunity test is proposed. Based on the proposed models, a design methodology for a double exponential pulse generator is presented with various source pulse requirements based on the HEMP conductive disturbance immunity test. To design the proposed equivalent circuit model, the relationship between the equivalent circuit model and source pulse requirements is analyzed and applied to the design methodology with low-impedance conditions. The proposed equivalent circuit model and design methodology are successfully verified experimentally with device-under-test circuits fabricated on printed circuit boards.
적응형 간섭제거 중계기에서 이미지 제거를 통한 성능 개선
김원택(Won-Taek Kim),권종화(Jong-Hwa Kwon),박경호(Kyoung-Ho Park),김주완(Joo-Wan Kim),하성희(Sung-Hee Ha),반지훈(Ji-Hun Van),이종현(Jong-Hyun Lee) 대한전자공학회 2007 대한전자공학회 학술대회 Vol.2007 No.7
The received signal of ICS repeater is composed of BS (Base Station) and feedback signals. In this case, if the feedback signal is not rejected, system is oscillated. we use the IF signal for rejecting the feedback signal at ICS system. In general, SAW filter is used to reject the image of IF signal. the use of this filter generates the system delay problems. In this paper, instead of SAW filter we use the Hilbert transform for rejecting image signal.