http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
결함위치추정 기법을 이용한 공대지 항공무장의 오류 요인 분석
김재환,최경희,정기현,Kim, Jae-Hwan,Choi, Kyung-Hee,Chung, Gi-Hyun 한국군사과학기술학회 2010 한국군사과학기술학회지 Vol.13 No.4
In this paper, we suggest a localization method of factors affecting the accuracy of Air-to-Ground weapon delivery. The proposed method, called FBEL(Factor-Based Error Localization), is based on the fault localization technique widely utilized in the realm of software engineering field. FBEL localizes the major factors affecting the performance of weapon delivery. To analyze the effectiveness and the applicability of FBEL, we applied FBEL to real firing data and got the major factors caused the errors. We expect that the method could contribute to improve the quality of weapon delivery system. We also expect that it may aid improvement of pilot capability greatly, if it is applied to pilot firing training.
김재환,한민수,이장존,송치영,이재만,김민지,이명성,Kim, Jae-Hwan,Han, Min-Su,Lee, Jang-Jon,Song, Chi-Young,Lee, Jae-Man,Kim, Min-Ji,Lee, Myeong-Sung 국립문화재연구소 2009 保存科學硏究 Vol.30 No.-
Stone cultural heritages are mostly situated in field, so they are damaged from mechanical, chemical and biological weathering, and their degree of strength is also weaken. Therefore, the scientific conservation of the stone cultural heritages are necessary in order to the long-term maintenance and safety conservation. In this study, we attempt to estimate on the field application of consolidants which are Wacker OH 100, Remmers KSE 300 and 1T1G according to the quality of the rocks. Based on the ultrasonic velocity, conditions of weathering damage before treatment are mainly ranked completely weathering condition (CW) or partly highly weathering condition (HW). After the first treatment, weathering damage conditions are changed by the high weathering condition (HW). These results shows that the internal pores of stone are filled with consolidant materials, so average ultrasonic velocities increases after treatment. And Remmers KSE 300 which is consolidant material is highest rate of increase of average ultrasonic velocities.
열린 비아 Hole의 전기도금 Filling을 이용한 Cu 관통비아 형성공정
김재환,박대웅,김민영,오태성,Kim, Jae-Hwan,Park, Dae-Woong,Kim, Min-Young,Oh, Tae Sung 한국마이크로전자및패키징학회 2014 마이크로전자 및 패키징학회지 Vol.21 No.4
써멀비아나 수직 배선으로 사용하기 위한 Cu 관통비아를 열린 비아 hole의 top-down filling 도금공정과 bottom-up filling 도금공정으로 형성 후 미세구조를 관찰하였다. 직류도금전류를 인가하면서 열린 비아 홀 내를 top-down filling 도금하거나 bottom-up filling 도금함으로써 내부기공이 없는 건전한 Cu 관통비아를 형성하는 것이 가능하였다. 열린 비아 홀의 top-down filling 공정에서는 Cu filling 도금 후 시편의 윗면과 밑면에서 과도금된 Cu 층을 제거하기 위한 chemical-mechanical polishing(CMP) 공정이 요구되는데 비해, 열린 비아 홀의 bottom-up filling 공정에서는 과도금된 Cu층을 제거하기 위한 CMP 공정이 시편 윗면에서만 요구되는 장점이 있었다. Cu through-vias, which can be used as thermal vias or vertical interconnects, were formed using bottom-up electrodeposition filling as well as top-down electrodeposition filling into open via-holes and their microstructures were observed. Solid Cu through-vias without voids could be successfully formed by bottom-up filling as well as top-down filling with direct-current electrodeposition. While chemical-mechanical polishing (CMP) to remove the overplated Cu layer was needed on both top and bottom surfaces of the specimen processed by top-down filling method, the bottomup process has an advantage that such CMP was necessary only on the top surface of the sample.
무기체계 임베디드 소프트웨어에 대한 TFM 기반 시스템 테스트 모델 설계 및 적용
김재환,윤희병,Kim, Jae-Hwan,Yoon, Hee-Byung 한국정보처리학회 2006 정보처리학회논문지D Vol.13 No.7
In this paper we design the system test model for the weapon system embedded software based on the Time Factor Method(TFM) considering time factors and suggest the results through the case study. For doing this, we discuss the features, system tests and the object-oriented model based UML notations of the weapon system embedded software. And we give a test method considering time factors, a measuring method to time factors, and a test case selection algorithm as an approach to the TFM for designing the system test model. The TFM based system test model consists of three factors (X, Y, Z) in the weapon system embedded software. With this model, we can extract test cases through the selection algorithm for a maximum time path in 'X', identify the objects related to the Sequence Diagram in 'Y' and measure the execution time of each objects which is identified by the Timing Diagram in 'Z' Also, we present the method of extracting the system test cases by applying the proposed system test model to the 'Multi-function missile defense system'. 본 논문에서는 무기체계 임베디드 소프트웨어의 시간 요소를 고려한 TFM(Time Factor Method) 기반의 시스템 테스트 모델을 설계하고, 적용사례를 통하여 결과를 제시한다. 이를 위해 무기체계 임베디드 소프트웨어의 특징과 시스템 테스트 그리고 객체지향 모델의 표현방법인 UML 표기법에 대하여 알아보고, 시스템 테스트 모델 설계를 위한 TFM 접근 방법으로 시간 요소를 고려한 테스트 방법과 시간 요소 측정 방법 그리고 테스트 케이스 선정 알고리즘을 제시한다. 무기체계 임베디드 소프트웨어의 TFM 기반 시스템 테스트 모델은 세 가지 요소 (X,Y,Z) 로 구성되며, 'X' 에서는 최대시간경로를 선정하는 알고리즘을 통해 테스트 케이스가 도출되고, 'Y' 에서는 Sequence Diagram과 관련된 객체를 식별하고, 'Z'에서는 Timing Diagram을 통하여 식별된 각 객체들의 실행시간을 측정한다. 또한 제안한 W:M 기반 시스템 테스트 모델을 '다기능 미사일 방어시스템'에 적용하여 테스트 케이스를 추출하는 방법을 제시한다.
ECR 플라즈마 화학기상증착법에 의한 0.12nm $\textrm{SiO}_2$ 환산두계를 갖는 Pb(Zr, Ti)$\textrm{O}_3$유전박막의제조
김재환,김용일,위당문,이원종,Kim, Jae-Hwan,Kim, Yong-Il,Wi, Dang-Mun,Lee, Won-Jong 한국재료학회 1997 한국재료학회지 Vol.7 No.8
ECR-PECVD법을 사용하여 450-49$0^{\circ}C$이하의 온도에서 Pt/SiO$_{2}$/Si기판 위에 PZT 박막을 증착하였다. 기판 온도가 46$0^{\circ}C$ 이하일 경우에는 페로브스이트 상과 제2상으로 이루어진 박막이 성장하였으며 기판온도가 47$0^{\circ}C$이상일 때에는 페로브스카이트 단일상의 PZT 박막이 성장하였다. 49$0^{\circ}C$에서 매우 얇은 페로브스카이트의 PZT 박막을 증착한 후 $650^{\circ}C$에서 1분간 raped thermal annealing(RTA) 처리한 결과 박막의 조성과 결정성에는 거의 변화가 없었으나 박막의 전하 저장 밀도는 크게 향상되었다. 이는 RTA 처리에 의한 저유전 계면층의 소멸이 주된 이유라고 판단된다. 열처리 후 두께 40-45nm의 PZT박막은 200kV/cm의 전장 하에서 $10^{-6}$$\textrm{cm}^2$이하의 누설전류값을 갖고 있었으며, 인가전압 1V에서 300fF/$\mu$$m^2$의 정전용량, 즉 SiO$_{2}$환산두께 0.12nm를 나타내었다.
김재환,김상우,조원모,강희설,조영무,Kim, Jae-Hwan,Kim, Sang-Woo,Cho, Won-Mo,Kang, Hee-Seol,Cho, Young-Moo 한국축산환경학회 1996 축산시설환경학회지 Vol.2 No.2
The objective of this study was to estimate the investment limit in equipment capital by Capital Recovery Method. The data used was collected from 23 Hanwoo(Korean Native Cattle) farms in 1994. The necessary time for herd size expansion was average 5 years from opening(9.7 heads) to 50 heads, 4 years from 50 to 100heads, 3 years from 100 to 150 heads, and 2 years from 150 to 200 heads, respectively. It took 14 years from opening to 200 heads of herd size. The debts for fattening cattle farms were 15.2million won for the size of 50 heads, 37.1 million won for the size of 100 heads and 89.0 million won for the size 200 heads, respectively. Average rates of debt interest were 5.1 % 7.2 and 10.8, correspendingly. As the hear size increased, debt interest rates also increased due to government funds limit. The investment limits in equipment capital perfarm household were 77.7 million won for 50 heads, 135.1 for 100 heads, and 294.3 for 200 heads for 5,500 won per kg liveweight, 70.7 million won for 50 heads, 122.6 for 100 heads and 269.3 for 200 heads for 5,000 won per kg liveweight, 63.6 million won for 50 heads 110.0 for 100 heads and 244.2 for 200 heads for 4,500 won per kg liveweight.