http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
임종국 忠州大學校 2005 한국교통대학교 논문집 Vol.40 No.2
This study is a research of safety valve development for LP gas cylinder which use sintering metal. Researcher wiches to apply technology of sintering metal for safety valve development and do gas flow control. The basis of this study is most suitable fluid examination that to reduce gas accident. This research concluded following results. 1. When press pin length is 42mm to 45mm powder quantity is 0.25g, in case of press pin length 36mm to 42mm powder quantity is 0.2g, displayed fluid optimization. 2. When press pin length is 39mm and powder quantity is 0.25g, press pressure displayed fluid optimization at all niterests from 1.2 tons/㎠ to 2 tons/㎠. 3. when apparent density is about 5.0g/㎤ to 4.5㎤, fluid optimization becomes.
林鍾國 慶北大學校 語學硏究所 1992 語文硏究 Vol.17 No.-
19세기의 중엽에 스위스의 청교도 시인 Gottfried Keller는 그의 「Seem?rchen」에서 남성이 진짜 악마 여성에게 폭력을 당하게 하고 있고 그로써 전통적인 세계관을 온통 뒤바꾸어 놓은 느낌을 주게 하고 있다. 그와 반대로 Schwitters의 「Die Nixe」는 20세기 초의 초현실주의에 대한 시대기록문서이며 시민세계의 달라진 가치관에 대한 증거서류이다. 이시기에 Schwitters의 창작은 다다이즘쪽으로 진전하여 신랄한 논쟁과 채지있는 언어실험에 참여하였고 동시에 자기의 작품을 대중화시키는데 전력하였다. 표현술을 추구하면서 그는 언어실험을 사용하였고 새로운 동사를 만들었으며 예술적 형식을 위해 단어반복을 이용하였다. 음성으로만 적용한 인공단어를 일부러 부적절하게 사용함으로써 시민의 언어를 희화하였다. 이것은 서구의 문학혁명이라는 관점에서 볼때 심미적 사회적 정치적 가치의 급격한 변혁을 분명히 해준다. 낡은 양식의 담시의 시대는 제1차 세계대전 이후에 실질적으로 끝난 셈이다. 18세기와 19세기 초의 시인들에게 담시가 고급 예술형식으로 통용되었던 반면에 담시의희시 에서는 담시를 정상적 장르로서 실현시키려는 의도가 전혀 들어있지 않다. 현대시는 예술을 위한 예술을 위해, 독자에 대해서는 아랑곳 하지도 않은 채, 실험이 되고 있다.
Ferritic Stainless Steel의 소결조건에 따른 자기적 특성
林鍾國 충주대 산업과학기술연구소 1999 産業科學論文集 Vol.7 No.1
It is well known for ferritic stainless steel powder to applicate a sensor ring in anti-lock brake system of automobile, several studies, because of its excellent magnetic properties. This study was carried out to investigate the magnetic properties such as the maximum magnetic induction, coercivity and maximum permeability of the materials with functions of sintering density, time and temperature, and concluded as follows; 1.Both maximum magnetic induction value of 4700 Gauss and permeability of 200 were obtained at the maximum sintering density of 6.89g/cm3. Here, the properties showed a linear increasement with increasing the sintering density. 2.Coercivity sharply increased with incresing the sintering density and reached to 7.6 Oe at the maximum sintering density of 6.89g/cm3. 3.With increasing the sintering density, the temperature from 1140℃ to 1250℃ and the time from 30min to 60min, the maximum magnetic induction rate, coercivity and maximum permeability were increased simultaneously.