http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
무치악 환자에서 구강 스캔과 지대주 중첩을 이용한 임플란트 보철수복 증례
황찬현,정승미,김용준,김경희,방정환,김대환,최병호,Hwang, Chan-Hyeon,Jeong, Seung-Mi,Kim, Yong-Jun,Kim, Kyeong-Hee,Fang, Jeong-Whan,Kim, Dae-Hwan,Choi, Byung-Ho 대한치과보철학회 2017 대한치과보철학회지 Vol.55 No.1
In this case, the impression surface of the existing denture was scanned and was inverted three-dimensionally to express the residual ridge form. Implant planning was performed on the superimposed data of the CT with the scanned image of the denture with radiopaque markers attached. At the day of surgery, customized abutments fabricated in accordance with the form of the gingival margin were linked with fixtures and temporary restorations were set. In the process of fabricating the final prosthesis after the osseointegration of implant fixture, the intraoral scan images at abutment level were merged with images of the abutments scanned and stored before implant surgery. By fabricating the final prosthesis with the abutments obtained by merging can increase the marginal fitness of the final prosthesis and simplify the clinical process. 본 증례에서는 기존의 총의치 사용 환자에서 의치의 이장된 인상면을 스캔하고 이를 삼차원적으로 반전하여 잔존 치조제의 형태를 재현하고, 의치에 방사선 불투과성 마커를 부착한 상태로 스캔 및 CT 촬영을 진행하여 스캔 이미지와 CT 영상이 중첩된 데이터 상에서 임플란트 식립을 계획하였다. 수술 당일에는 치은 형태에 맞게 제작된 맞춤형 지대주와 임시 수복물을 장착하였다. 임플란트 고정체의 골유착이 완료된 이후 최종 보철물을 제작하는 과정에서는 임플란트 식립 전 미리 스캔하여 저장된 임플란트 지대주 이미지 파일과 구강 내 지대주 상태에서 채득된 구강 스캔 이미지를 중첩하였다. 중첩을 통해 얻어진 정확한 지대주 형태 상에서 최종 보철물을 제작함으로써 최종 보철물의 변연 적합도를 높이고 임상 과정을 간소화 할 수 있었다.
디지털 스캔을 이용하여 제작된 임플란트 수술가이드의 정확도
정승미,방정환,황찬현,강세하,최병호,방일흠,전형태,안성훈,Jeong, Seung-Mi,Fang, Jeong-Whan,Hwang, Chan-Hyeon,Kang, Se-Ha,Choi, Byung-Ho,Fang, Yiqin,Jeon, Hyongtae,An, Sunghun 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.2
목적: 인상재와 석고모형을 사용하지 않고 디지털 영상 만을 사용하여 제작된 수술가이드를 이용한 치과 임플란트 수술의 정확도를 평가하고자 하였다. 재료 및 방법: 상하악 부분 무치악 모델 6개 세트를 본 연구에 사용하였다. 모델을 환자 구강구조로 간주하고 부분 무치악 모델을 Trios 구강스캐너로 디지털 인상을 채득하였다. 수술가이드의 정확도 평가를 위해 제작된 Reference plate를 모델의 교합면에 고정한 상태로 CBCT를 촬영하였다. CBCT에서 얻은 영상과 디지털 인상에서 얻은 영상을 정합하고 정합한 영상에서 임플란트 식립위치를 진단하고 수술가이드를 디자인하였다. 제작된 수술가이드를 이용하여 부분 무치악 모델에서 임플란트를 식립하였다. 시술 후, 시술 전과 동일한 방법으로 CBCT를 촬영하여 시술 전 컴퓨터 소프트웨어에서 측정한 수치와 시술 후 CBCT촬영하여 소프트웨어상에서 측정한 시술 후 수치 사이 차이점을 비교하였다. 결과: 평균거리오차가 임플란트 상단 X축에서 0.27 mm, Y축에서 0.29 mm 였으며, 임플란트 하단(Apex)부위에서는 X축에서 0.11 mm, Y축에서 0.14 mm 평균각도오차가 X축에서 $0.26^{\circ}$, Y축에서 $0.26^{\circ}$ 였다. 평균수직오차는 +0.44 mm로 시술 전 계획한 높이보다 평균 0.44 mm 더 위로 임플란트가 식립되었다. 결론: 본 연구의 결과는 인상재와 석고모형을 사용하지 않고 디지털 영상 만을 사용하여 제작된 수술가이드를 사용하여 임플란트를 시술할 경우 계획한 임플란트 식립 위치와 방향으로 높은 정확도를 가지고 임플란트를 식립할 수 있음을 보여 주었다. Purpose: The objective of this study was to evaluate the accuracy of a stereolithographic surgical guide that was made with information from intraoral digital impressions and cone beam CT (CBCT). Materials and methods: Six sets of resin maxilla and mandible models with missing teeth were used in this study. Intraoral digital impressions were made. The virtual models provided by these intraoral digital impressions and by the CBCT scan images of the resin models were used to create a surgical guide. Implant surgery was performed on the resin models using the surgical guide. After implant placement, the models were subjected to another CBCT scan to compare the planned and actual implant positions. Deviations in position, depth and axis between the planned and actual positions were measured for each implant. Results: The mean deviation of the insertion point and angulation were 0.28 mm and $0.26^{\circ}$, apex point were 0.11 mm and 0.14 mm respectively. The implants were situated at a mean of 0.44 mm coronal to the planned vertical position. Conclusion: This study demonstrates that stereolithographic surgical guides created without the use of impressions and stone models show promising accuracy in implant placement.
완전 무치악 환자에서 디지털 시스템을 이용한 임플란트 즉시 보철수복 증례
방정환,정승미,강세하,황찬현,김대환,최병호,Fang, Jeong-Whan,Jeong, Seung-Mi,Kang, Se-Ha,Hwang, Chan-Hyeon,Kim, Dae-Hwan,Choi, Byung-Ho 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.2
This article describes how to use CBCT and an intraoral scanner in a fully edentulous case that enables the clinician to place implants with flapless guided surgery and to engage prefabricated, customized implant abutments at the time of implant surgery, with only 1 clinical consultation before implant surgery. The patient's existing denture is used to simulate the teeth, the soft tissue and the vertical dimension of occlusion, and jaw relationship in the fully edentulous jaw. It provides clinicians with a fast workflow and improves clinical efficiency. 본 증례는 하악 완전 무치악 환자에서 인상채득과 석고모형 제작과정 없이 CBCT와 구강스캐너를 이용하여 수술 전에 한 번의 치과방문으로 임플란트 식립과 동시에 즉시 보철수복을 시행하는 방법을 제시하였다. 무치악 부위 연조직 형태, 수직교합고경, 상하악 악궁관계에 대한 정보는 환자가 사용하고 있는 의치를 스캔하여 얻었다. 이 방법은 무치악 환자에서 임플란트를 이용한 보철수복 과정을 기존의 방법보다 내원 횟수를 단축시켰다.