http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
- 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
- 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
RISS 인기검색어
- 검색키워드
- 저자 : 황정복(Jung-Bok Hwang) (검색결과 2 건)
- 무료
- 기관 내 무료
- 유료
-
이현우(Hyun-Woo Lee),황정복(Jung-Bok Hwang),김선웅(Sun-Ung Kim),김원혁(Won-Hyuck Kim),유승조(Seung-Jo Yoo),임현우(Hyun-Woo Lim),염영진(Young-Jin Yum) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.6
자동차의 측면 충돌시 승객을 보호하고자 박판재를 이용하여 자동차의 도어 임팩트빔을 핫스탬핑공법을 이용하여 개발하였다. 핫스탬핑 기술은 차량의 차체 강성을 증가시킬 뿐만 아니라 차체 중량 및 부품 수 축소로 인한 공정의 감소도 가능하게 한다. 핫스탬핑 시편을 제작하고, 기계적 물성시험을 수행하여 물성 데이터를 확보하였다. 핫스탬핑 임팩트빔의 성형해석및 구조해석을 이용한 최적 설계를 수행하여 기존 파이프형태의 임팩트빔보다 강도는 102% 향상되고, 중량은 34% 감소된 핫스탬핑 임팩트빔을 개발하였다. A vehicle door impact beam made of a thin sheet of steel has been constructed using hot stamping technology with the aim of ensuring occupant safety in the event of a side collision. This technology has been used to increase the strength of the vehicle body parts and to reduce the weight of the door impact beam as well as the number of work processes. Mechanical tests were performed to determine the material properties of the hot-stamped specimen and the results of the tests were used as input data in stamping and structural simulation in order to obtain the optimal design of door impact beam. The strength of the hot-stamped door impact beam increased to a value that was 102% higher than that of conventional pipe-shaped door impact beam. A weight reduction of 34% was also achieved.
-
손진혁(Jin-Hyug Son),염영진(Young-Jin Yum),김원혁(Won-Hyuck Kim),황정복(Jung-Bok Hwang),김선웅(Sun-Ung Kim),유승조(Seung-Jo Yoo),이현우(Hyun-Woo Lee) 대한기계학회 2008 大韓機械學會論文集A Vol.32 No.6
An high frequency induction hardening technology of vehicle body press-formed of thin sheet steel has been developed to increase the strength of vehicle body parts locally by high frequency induction heating, thereby eliminating the need for reinforcements. And this technique for increasing the tensile strength of sheet steel was practically applied to the front floor cross member and center pillar reinforcement of a passenger car. The side impact behavior has been investigated when induction hardening technology is applied to the conventional low-carbon steel and weight reduction of an automotive body is expected. In this paper, basic experiments were performed for the hat-shaped specimen under high frequency induction heating process. Martensitic transformation was found in the heating zone through microscopic observation which showed higher hardness. In addition, the hardness and strength of the center-pillar specimen made of boron steel increased remarkably by high frequency induction heating.
ScienceON
DBpia연관 검색어 추천
이 검색어로 많이 본 자료
활용도 높은 자료
