http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스월 분사기 분무 혼합충돌지역에서의 중첩각도에 관한 실험적 연구
이영선 ( Young Sun Yi ),홍문근 ( Moon Geun Hong ),이수용 ( Soo Yong Lee ) 한국분무공학회 2011 한국액체미립화학회지 Vol.16 No.4
The pressure-swirl atomizer is widely used for the injectors in liquid rocket engines thanks to its high performance atomization and broad stability margin range. Spray mixed-interaction is an important area of study especially in cases where the propellant is mixed by spray interaction after an oxidant and a fuel are discharged separately. This interaction of sprays results in a significant modification of the spray characteristics such as the spatial evolution of the sprays. Experiments are conducted by a photographic technique to quantify the merged angle of the interaction regions of sprays from two pressureswirl injectors. The experimental results show that the merged angle is mainly determined by the momentum flux ratios between two swirled sprays.
미립화 및 분무장치 1 : 이상유체 분사기의 분사조건에 따른 분무 형상 연구
이영선 ( Young Sun Yi ),홍문근 ( Moon Geun Hong ),이수용 ( Soo Yong Lee ) 한국액체미립화학회 2012 한국액체미립화학회 학술강연회 논문집 Vol.2012 No.-
Gas-centered swirl coaxial injectors are widely used for staged combustion cycle engines. In recent years, the gas-centered swirl coaxial injector has attracted much attention for the high-power application in liquid rocket engines because of its efficient atomization characteristics. The understanding of the spray characteristics of the gas-centered swirl coaxial injector is indispensible for the design of more reliable and efficient injectors dedicated to liquid rocket engines. In particular, experiments were carried out to investigate the effect of momentum flux ratio on the spray pattern of the gas-centered swirl injector. The curvature radius of the spray was predicted using the spray angle measured by image process techniques. The experimental results showed that the curvature radius increases with the increment of the momentum flux ratio.
발사체 추력제어 안정성을 위한 PWM 솔밸브의 탱크압력제어
이중엽(Joong-Youp Lee),홍문근(Moon-Geun Hong),한상엽(Sang-Yeop Han),김영목(Young-Mog Kim) 한국유체기계학회 2006 유체기계 연구개발 발표회 논문집 Vol.- No.-
This paper achieved dynamic characteristics with test to use solenoid valve for flight model that have present. Designed pressure control virtual system which PWM solenoid valve to use test result. Examination compared solenoid valve dynamic characteristics in atmosphere and cryogenic fluid and presented technique and valuation method that measured upstream and down stream pressure of solenoid valve, as well as, temperature, excitation voltage etc. These test results could confirm solenoid valve response time and maximum using frequency characteristic at use in atmosphere and cryogenic temperature and this derived design variables pressure control system from those bases.
다단연소방식 로켓엔진 산화제 과잉 예연소기용 3중 분사기 개발
김진형(Jin-Hyung Kim),강진모(Jin-Mo Kang),방정석(Jeong-Suk Bang),이병호(Byung-Ho Rhee),하성업(Seong-Up Ha),홍문근(Moon-Geun Hong),이수용(Soo-Yong Lee) 한국추진공학회 2012 한국추진공학회 학술대회논문집 Vol.2012 No.11
다단연소방식 로켓엔진의 산화제 과잉 예연소기에 사용되는 3중 분사기 개발을 위하여 3 가지 형태의 분사기를 제작, 시험하였다. 분사기의 구성은 산화제 분사기 몸체, 연료 분사기 몸체, 그리고 연료 분사기 커버로 구성되어 있으며, 조립된 분사기는 다시 헤드에 위치한 관 형태의 개별적 공간에 각각 장착되는 형태로 되어 있다. 분사기는 단품가공, 정밀검사, 브레이징 접합 등의 공정을 거쳐 제작 되었으며, 제작 완료된 분사기는 수류시험을 수행하여 유량계수를 상대 비교 분석함으로서 특성을 파악하였다. 본 개발을 통해 고성능 액체추진로켓 엔진에 적용되는 3중 분사기 설계제작의 기술적 기반과 특수공정 응용기술 등을 정립하였으며, 향후 폐쇄형 사이클 구조의 고성능 액체추진로켓 엔진 개발시 유용한 기초자료로 활용될 것이다.