http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
한기영(Gi-Young Han),장춘만(Choon-Man Jang) 한국유체기계학회 2007 유체기계 연구개발 발표회 논문집 Vol.- No.-
This paper describes the performance and internal flow characteristics of two-stage high pressure ring blower. Understanding of internal flow in the ring blower having a complicated geometry is important to increase the blower performance. Relatively good agreement between experimental measurements and numerical simulation is obtained in the present study. Throughout the numerical simulation, detailed flow characteristics inside the impeller and casing is analyzed. Local recirculation flow and low velocity region is found inside impeller and casing. This mainly deteriorates the performance of a ring blower. Especially, the non-uniform inlet flow to the impeller due to the complicated casing geometry makes large low velocity region near the outer side of the impeller tip.
탁봉열,김병덕,양해경,한기영,이소아,Tak, Bong-Yeol,Kim, Byung-Duk,Yang, Hea-Gyeong,Han, Gi-Young,Lee, So-A 한국유체기계학회 2011 한국유체기계학회 논문집 Vol.19 No.3
Due to a roots type medium vacuum pump is operated in condition of $1{\sim}10^{-3}$ torr vacuum, it could be applied for production and process of industrial parts, such as precise processing, vaporization, enrichment, separation, casting, metaling, welding, transportation. Therefore, the demand of this pump is increasing nowadays in our industrial markets of semiconductor, electric, electronic, automobile, material, environmental and transporting industries. However, the pumps are almost imported, because the domestic pumps are inferior in fields of vacuum range as under $10^{-1}$torr, relevant techniques(design, fabrication, casting, test, etc.) to the imported ones. In this study, essential parts of the development pump are designed with using of CFD and 3D decodes, FEM for analysing strength and deformation, generated heat, vibration and noise control, and are casted with using of mechanochemistry techniques for decreasing of weights, increasing of heat resistances and abrasion durability of materials for pump caing and impellers especially. Besides, in order to achieve ultimate vacuum around $10^{-3}$torr, this pump is composed of 6 stages, among which 1st stage is operated separately from remained stages. Additionally, a test rig for prototype pumps(300$m^3/h$ and 2,500$m^3/h$) is designed and procured as to apply for multi-staged rootz type vacuum pump, with modification of the test method recommended by KS B 6314 "Positive-displacement oil-sealed rotary vacuum pumps".
서울시내 수계시설에서 분리된 Legionella spp.의 병원성에 대한 분자역학적 연관성
김진아,정지헌,김수진,진영희,오영희,한기영,Kim, Jin-Ah,Jung, Ji-Hun,Kim, Soo-Jin,Jin, Young-Hee,Oh, Young-Hee,Han, Gi-Young 한국미생물학회 2009 미생물학회지 Vol.45 No.2
Legionella spp. is the causative agent of Legionellosis, which induces a potentially fatal form of pneumonia. With a concentrated performance during the summer of 2008, we secured 73 isolates from the water systems of 25 wards in Seoul. We analysed serotypes, pathogenic genes (Dot/Icm), and patterns of pulsed-field gel electrophoresis (PFGE) in an attempt to confirm relationships among them. Different from the previous year's pattern (2007), among the isolates, 69 were Legionella pneumophila and 4 were Legionella spp. The serotype distribution of Legionella pneumophila was sg1 43, sg6 9, sg5 8, sg3 8, and sg2 1. The serotype for the 4 Legionella spp. was Legionella nautarum. Most of the Legionella pneumophila had several pathogenic genes. On the other hand, the 4 Legionella spp. were defective in pathogenicity in genomic terms. The PFGE patterns of the serotypes showed a tendency for diversity of Legionella pneumophila and a close correlation with genetic pathogenicity. 레지오넬라균은 치명적인 폐렴을 일으킬 수 있는 균으로서, 기후 온난화와 함께 노출의 수위가 높아지고 있는 병원성균이다. 본 연구는 2008년 6월부터 8월까지 서울시내 25개구 소재 수계시설에서 분리한 레지오넬라균 73개 주에 대해 혈청형, Dot/Icm라 일컬어지는 병원성 유전자 분석 그리고 Pulsed field gel electrophoresis (PFGE)를 실시하여 유전자형과 그들 사이의 상관관계를 파악하였다. 73개주 중 69주는 Legionella pneumophila로 혈청형의 분포는 sg1 43주, sg6 9주, sg5 8주, sg3 8주, sg2 1주로 파악되었으며, Legionella spp. 4개주는 Legionella nautarum였다. 분리된 Legionella pneumophila 대부분이 여러 개의 병원성 유전자를 보유하고 있었으며, 반면에 Legionella nautarum은 병원성 유전자가 많이 결핍되어있었다. PFGE pattern을 분석해 볼 때, Legionella pneumophila가 동일한 혈청형안에서 다양하게 분화되어감을 볼 수 있었으며, 병원성 유전자의 분포와 깊은 상관관계를 보였다.
탁봉열(Bong-Yeol Tak),김영주(Young-Ju Kim),방창열(Chang-Yeol Bang),한기영(Gi-Young Han),민길호(Gil-Ho Min),이소아(So-A Lee) 한국마린엔지니어링학회 2010 한국마린엔지니어링학회 학술대회 논문집 Vol.2010 No.10
루츠형 중진공펌프는 1~10-3torr 범위의 진공을 발생하기 때문에 진공상태에서 이루어지는 정밀가공, 증발, 농축, 분리, 주조, 증착, 이송 등의 여러 가지 생산 및 처리공정에 활용될 수 있어 진공을 필요로 하는 국내 여러 분야의 산업, 특히 반도체, 전자, 자동차, 금속소재, 환경설비, 물류 관련 제품을 생산하는 산업에서 수요량이 증가되는 추세이다. 그러나 국산 루츠형 중진공펌프는 진공도가 10-1torr 이하이며, 핵심부품이라 할 수 있는 펌프케이싱과 임펠러에 대한 CFD해석, 진동ㆍ소음저감, 3D 강도해석, 열팽창 및 내마모성을 감안한 정밀주조 등의 관련기술이 미흡하기 때문에 대부분 수입에 의존하고 있다. 본 연구를 통하여 이러한 애로기술을 해결하여 배기속도 2,500ㅡm3/h(진공도를 10-3torr) 정도인 루츠형 다단 중진공펌프 설계와 시작품에 적용될 성능시험 장치를 제작하여 확보하였다.
120㎾급 대형고압 피스톤펌프 개발 및 상용화 기술개발
탁봉열(Bong-Yul Tak),김영주(Young-Ju Kim),한기영(Gi-Young Han),배상옥(Sang-Ok Bae) 한국마린엔지니어링학회 2006 한국마린엔지니어링학회 학술대회 논문집 Vol.2006 No.-
The following instructions give you basic guidelines for preparing camera-ready papers for the Journal of the KOSME. We recommend you to use the HWP word processor.
선박 초기화재 진화용 소방 펌프 성능 향상에 관한 연구
김강용(Kim Kang Yong),탁봉열(Tak Bong Yul),한기영(Han Gi Young),정훈(Jung Hun) 한국마린엔지니어링학회 2005 한국마린엔지니어링학회 학술대회 논문집 Vol.2005 No.-
미수분무 소화장치의 IMO 규격이 대폭 강화되어, 미수분무 소화장치에 공급되는 소화수의 용량 증대, 압력증가 등이 예상되어 그에 필요한 대형 고압 피스톤 펌프 개발이 필요하게 되었다. 이에 따라 설계 제작 및 성능시험기준을 확보하고, 기존 미수분무 소화장치용 고압펌프 진동 저감 및 내구성 향상으로 생산제품에 대한 신뢰성 향상을 이루었다.