펜듈럼 구조체 제작을 위한 TMAH 습식 식각 시 모서리 보상에 관한 연구

한규성 (Kyu Sung Han ),이기정 (Ki Jung Lee ),박신욱 (Sin Wook Park ),양상식 (Sang Sik Yang ) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.7

홈 원격 제어를 위한 저비용 고효율의 새로운 음향인식 알고리즘에 관한 연구

한규성(Kyu-Sung Han),김동회(Dong-Hoi Kim) 한국정보기술학회 2011 한국정보기술학회논문지 Vol.9 No.1

This paper proposes an acoustic recognition algorithm based on low expenditure and high efficiency. On the other hand, speech recognition is a convenient recognition algorithm but its implementation requires low efficiency and high spending. Although the speech recognition system provides convenience in home, it requires the difficulty of its implementation and can hardly achieves a perfect recognition rate of 100%. Therefore, in this paper, we realize an acoustic recognition algorithm with a low expenditure and high efficiency using the Frequency-Decimated Radix-2 FFT (Fast Fourier Transform). From the simulation results, we find that the proposed acoustic recognition algorithm achieves high recognition rate near 90% with a simple implementation.

A study on the corner compensation in anisotropic TMAH etching for pendulum structure

한규성(Kyu Sung Han),이기정(Ki Jung Lee),박신욱(Sin Wook Park),양상식(Sang Sik Yang) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.7(초록집)

유도 열플라즈마 공정을 이용한 고순도 카본분말 합성

김경인,한규성,황광택,김진호,Kim, Kyung-In,Han, Kyu-Sung,Hwang, Kwang-Taek,Kim, Jin-Ho 한국결정성장학회 2013 韓國結晶成長學會誌 Vol.23 No.6

실리콘카바이드(SiC)는 높은융점과 내마모성 및 열전도 특성으로 산업적으로 널리 활용되고 있다. 특히 고순도 SiC는 고효율 전력 변환용 SiC 반도체 및 LED 공정에 적용되는 미래소재로 각광받고 있다. 본 연구에서는 고순도 SiC를 합성하기 위한 원료인 고순도 카본(C)을 유도 열플라즈마(RF Inductively thermal plasma)를 이용하여 합성하였으며, 출발원료로서 탄화수소계 액상물질인 도데칸이 사용되었다. 유도 열플라즈마 합성된 고순도 카본은 반응관과 필터에서 포집되며, 필터에서 포집된 카본 분말은 반응관에서 포집된 카본 분말보다 작은 입도(10~20 nm)와 낮은 결정성을 갖는 것으로 확인하였다. 반응관과 필터부에서 포집된 카본 분말의 순도는 각각 99.9997 %(5N7)와 99.9993 %(5N3)로 측정되었으며, 카본 분말에서 검출되는 불순물은 열플라즈마 합성장비에서 기인한 것으로 확인되었다. Silicon carbide (SiC) has recently drawn an enormous industrial interest because of its useful mechanical properties such as thermal resistance, abrasion resistance and thermal conductivity at high temperature. Especially, high purity SiC is applicable to the fields of power semiconductor and lighting emitting diode (LED). In this work, high purity carbon powders as raw material for high purity SiC were prepared by a RF induction thermal plasma. Dodecane ($C_{12}H_{26}$) as hydrocarbon liquid precursor has been utilized for synthesis of high purity carbon powders. It is found that the filtercollected carbon powders showed smaller particle size (10~20 nm) and low crystallinity compared to the reactor-collected carbon powders. The purities of reactor-collected and filter-collected carbon powders were 99.9997 % (5N7) and 99.9993 % (5N3), respectively. In addition, the impurities of carbon powders synthesized by RF induction thermal plasma were mainly originated from the surrounding environment.

구리 분말 첨가를 통한 도자타일 표면유약의 소수화 특성

최청수,한규성,황광택,김진호,Choi, Cheong-Soo,Han, Kyu-Sung,Hwang, Kwang-Taek,Kim, Jin-Ho 한국결정성장학회 2019 韓國結晶成長學會誌 Vol.29 No.5

건축용 내외장재로 사용되는 도자타일은 최근에 오염 방지 기능에 대한 시장의 수요에 따라, $TiO_2$ 코팅을 통한 친수성(hydrophilic property) 표면개발 연구와 더불어 표면에서 물방울의 흐름성을 향상시켜 오염물질을 제거하는 소수성(hydrophobic property) 표면을 갖는 도자타일에 대한 연구가 진행되고 있다. 특히 추가적인 코팅 공정 적용 없이 $1000^{\circ}C$ 이상의 소결 과정을 통해서 소수성을 갖으며, 기존 도자타일의 기계적 물성의 저하가 나타나지 않는 표면유약의 개발이 매우 중요하다. 본 연구에서는 상용화 도자타일의 표면유약에 조성에 구리 분말을 첨가하여 기존 소결 공정을 적용하고, 추가 코팅 공정 없이 소수성 도자타일을 제작하고 표면유약의 두께에 따른 접촉각 특성 변화를 관찰하였다. 구리 분말이 첨가되지 않은 도자타일의 표면 접촉각은 $25^{\circ}$로 친수성을 보이는 반면에 구리 분말이 첨가된 표면유약이 $150{\mu}m$ 두께인 경우에 접촉각이 $109^{\circ}$까지 증가하는 것을 확인하였다. 이와 같은 구리 분말이 첨가된 표면유약의 우수한 소수성 발현은 유약 표면에서 구리 입자의 세포 구조(cellular structure) 분포에 의한 것으로 확인되었다. 또한 개발된 소수성 도자타일의 기계적 물성(꺽임강도, 내화학성, 내마모성, 내동해성)은 기존 도자타일과 거의 동일하고 'KS L 1001 도자타일'의 기준을 만족하는 결과를 얻을 수 있었다. Ceramic tiles, which are widely used as interior and exterior materials for construction, have recently been required to have pollution prevention function. In order to remove contaminants, many researches of ceramic tiles with hydrophilic surface property through $TiO_2$ coating and hydrophobic surface property by improving the flow of water droplets have been proceeded. Expecially, it is very important to develop a surface glaze having hydrophobicity through a sintering process above $1000^{\circ}C$ without an additional coating process and the degradation of mechanical properties. In this study, surface glaze with copper powder was applied to manufacture of ceramic tile. Contact angle of ceramic tile according to thickness of surface glaze layer was investigated after the conventional sintering process. The contact angle of the ceramic tile surface without the copper powder was shown to be $25.3^{\circ}$, which is close to hydrophilic surface. However, the contact angle was increased up to $109.8^{\circ}$ when the thickness of surface glaze with the copper powder was $150{\mu}m$. The excellent hydrophobic property of the surface glaze with copper powder was resulted from the cellular structure of copper particles on the glaze surface. In addition, the mechanical properties of the developed hydrophobic ceramic tiles such as bending strength, chemical resistance, abrasion resistance, and frost resistance were well maintained and meet the criteria of 'KS L 1001 Ceramic tile'.

제강분진을 활용한 청색 세라믹 안료의 미립화 거동에 관한 연구

김혜진,한규성,황광택,남산,김진호,Kim, Hye-Jin,Han, Kyu-Sung,Hwang, Kwang-Taek,Nahm, Sahn,Kim, Jin-Ho 한국결정성장학회 2019 韓國結晶成長學會誌 Vol.29 No.3

Electric arc furnace dust (EAFD), which is a dust waste generated in the steel manufacturing process, contains heavy metals. Recently, researches of recycling a large amount of valuable metals such as zinc and iron in EAFD are being actively carried out. In this study, EAFD is used as a substitute for cobalt in blue ceramic pigments without any pretreatment. Then, the synthesized blue ceramic pigment using EAFD was micronized and formulated as a ceramic ink for inkjet printer. The particle size distribution, crystal structure and color characteristics during the micronization process were investigated for the development of ceramic ink. $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed excellent blue coloric properties and monomodal distribution through micronization process. The average particle size of $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments after 3 hours of milling was $0.271{\mu}m$, which is smaller than $0.303{\mu}m$, which is the average particle size of $CoAl_2O_4$ ceramic pigments without EAFD after 5 hours of milling. Especially, it was confirmed that $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ ceramic pigments showed a color difference (${\Delta}E{^*}_{ab}$) value of 5.67, which smaller than ${\Delta}E{^*}_{ab}$ value of $CoAl_2O_4$ during micronization. These results show that EAFD can be used as a raw material for a blue ceramic pigment by replacing expensive cobalt without any pretreatment. 제강분진(Electric arc furnace dust)은 제강공정에서 발생하는 분진폐기물로서 중금속을 다량 포함하고 있어 관리가 매우 중요하다. 제강분진은 아연, 철 등의 유가금속을 다량 함유하고 있기 때문에 최근 이를 재활용하는 연구가 활발하게 진행 중이며, 본 연구에서는 전처리 과정 없이 제강분진을 청색 계열의 세라믹 안료의 코발트를 대체할 수 있는 원료로 사용하였다. 또한 합성된 청색 세라믹 안료를 잉크젯 프린팅용 세라믹 잉크로 개발하기 위해 미립화 과정에서의 입도 분포, 결정 구조 및 발색 특성 변화에 대해 고찰하였다. 제강분진이 첨가된 $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료는 우수한 청색 발색 특성을 보이며, 어트리션 밀링(Attrition Milling)을 이용한 미립화 공정을 통하여 단정(monomodal) 분포의 입도를 확보할 수 있었다. 3시간 밀링 후 $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료의 평균 입도는 $0.271{\mu}m$로 제강분진이 첨가되지 않은 $CoAl_2O_4$ 세라믹 안료의 5시간 밀링 후의 평균 입도인 $0.303{\mu}m$보다 더욱 작은 것을 확인하였다. 특히, $Co_{0.75}Zn(EAFD)_{0.25}Al_2O_4$ 세라믹 안료는 미립화 공정 중 발색 변화(${\Delta}E{^*}_{ab}$) 값이 5.67로 $CoAl_2O_4$ 보다 작아서 더 우수한 발색 특성을 보이는 것으로 확인되었다. 이러한 결과는 분진폐기물인 제강분진을 어떠한 전처리 과정 없이 고가의 코발트를 대체하여 청색 계열의 세라믹 안료의 원료로 사용할 수 있다는 것을 보여주고 있다.

실리카-이산화티탄 복합 코팅층의 열적, 화학적 안정성 및 인쇄적성 평가

김혜진,한규성,황광택,남산,김진호,Kim, Hye Jin,Han, Kyu Sung,Hwang, Kwang Taek,Nahm, Sahn,Kim, Jin Ho 한국재료학회 2019 한국재료학회지 Vol.29 No.10

As automation systems become more common, there is growing interest in functional labeling systems using organic and inorganic hybrid materials. Especially, the demand for thermally and chemically stable labeling paper that can be used in a high temperature environment above $300^{\circ}C$ and a strong acid and base atmosphere is increasing. In this study, a composite coating solution for the development of labeling paper with excellent thermal and chemical stability is prepared by mixing a silica inorganic binder and titanium dioxide. The silica inorganic binder is synthesized using a sol-gel process and mixed with titanium dioxide to improve whiteness at high-temperature. Adhesion between the polyimide substrate and the coating layer is secured and the surface properties of the coating layer, including the thermal and chemical stability, are investigated in detail. The effects of the coating solution dispersion on the surface properties of the coating layer are also analyzed. Finally, it is confirmed that the developed functional labeling paper showed excellent printability.

착체중합법을 이용한 (Ni,Mg)Al₂O₄ Cyan 나노 무기안료 합성

손보람,윤대호,한규성,조우석,황광택,김진호,Son, Bo-Ram,Yoon, Dea-Ho,Han, Kyu-Sung,Cho, Woo-Suk,Hwang, Kwang-Taek,Kim, Jin-Ho 한국세라믹학회 2013 한국세라믹학회지 Vol.50 No.3

Here, we report preparation of cyan ceramic nano-pigment for inkjet printing and the Ni substitutional effects on the cyan color. $MgAl_2O_4$ was selected as the crystalline host network for the synthesis of nickel-based cyan ceramic nano-pigments. Various compositions of $Ni_xMg_{1-x}Al_2O_4$ ($0{\leq}x{\leq}1$) powders were prepared using the polymerized complex method. The powder was then preheated at $400^{\circ}C$ for 5 h and finally calcined at $1000^{\circ}C$ for 5 h. XRD patterns of $Ni_xMg_{1-x}Al_2O_4$ showed a single phase of the spinel structure in all the compositions. The particle sizes ranged from 20 to 50 nm in TEM observations. The characteristics of the color tones of $Ni_xMg_{1-x}Al_2O_4$ were analyzed by UV-Visible spectroscopy and CIE $L^*a^*b^*$ measurement. CIE $L^*a^*b^*$ measurement results indicate that the pigment color changes from light cyan to deep cyan due to the decrease of the $a^*$ and $b^*$ values with an increase of an Ni substitutional amount. In addition, the thermal stability and the binding nature of $Ni_xMg_{1-x}Al_2O_4$ are also discussed using TG-DSC and FT-IR results respectively.

베마이트를 이용한 UF 세라믹 분리막의 제조

위인희,신동욱,한규성,김진호,조우석,황광택,Wi, In-Hee,Shin, Dong-Wook,Han, Kyu-Sung,Kim, Jin-Ho,Cho, Woo-Seok,Hwang, Kwang-Taek 한국세라믹학회 2014 한국세라믹학회지 Vol.51 No.4

A single layer ultrafiltration(UF) ceramic membrane was prepared using boehmite sol. Boehmite was synthesized using a typical sol-gel process with optimization of the viscosity, pH, molar ratio of aluminum isopropoxide(AIP) and $HNO_3$. Boehmite sol was coated on a microfiltration(MF) support using the dip-coating method. MF support was dipped into the boehmite sol with a withdrawal speed of 5 mm/s and was maintained for 10 s in the boehmite sol, resulting in a uniform UF membrane layer of $10{\mu}m$ thickness. The porosity of the obtained membrane was measured and found to be 41.2%; the pore size was found to range from 80~100 nm, corresponding to the pore size of the UF membrane. The flux of the obtained membrane was initially 540 $L/m^2h$ and approximately 85% of the initial flux was recovered using a periodic back-flushing process.

침전법을 이용한 Indium hydroxide 분말의 합성 연구

최은경,이원준,한규성,김응수,김진호,황광택,김종영,황해진,심광보,조우석,Choi, Eun-Kyoung,Lee, Won-Jun,Han, Kyu-Sung,Kim, Ung-Soo,Kim, Jin-Ho,Hwang, Kwang-Teak,Kim, Jong-Young,Hwang, Hae-Jin,Shim, Kwang-Bo,Cho, Woo-Seok 한국결정성장학회 2017 한국결정성장학회지 Vol.27 No.3

고밀도 ITO 타겟 제조를 위해 입자의 크기가 미세하면서도 응집성이 적은 $In_2O_3$ 분말을 합성해야 한다. 본 실험에서는 $In_2O_3$ 분말의 특성에 영향을 미치는 전구체 Indium hydroxide 분말의 크기와 형상을 제어하는 것에 목적을 두고 있다. 출발 물질로써 Indium metal을 질산($HNO_3$)과 증류수의 혼합용액에 용해시켜 $In(NO_3)_3$ 용액을 만들었다. 침전제로 수산화암모늄($NH_4OH$)을 사용하여 농도, pH, 온도가 Indium hydroxide 특성에 미치는 영향을 분석하였다. X-ray diffraction으로 각 시료의 결정상을 분석하고 Crystallite size를 계산하였으며, TEM으로 입자의 형상과 크기를 분석하였다. 그 결과 $In(NO_3)_3$ 농도가 증가할수록 얻어지는 Indium hydroxide의 입자크기는 증가하였고 일정한 농도의 $In(NO_3)_3$ 용액에서 침전 pH 변화에 따른 Indium hydroxide의 입자크기와 형상의 변화는 관찰되지 않았다. 침전 시 온도가 상승할수록 입자크기는 증가하였다. For the production of a high-density ITO target, $In_2O_3$ powders with a small particle size and low agglomeration should be synthesized. The purpose of this study is to control the size and shape of the Indium hydroxide precursor which affects the properties of the $In_2O_3$ powder. As a starting raw material, Indium metal was dissolved in a Nitric acid ($HNO_3$) solution. The effect of concentration, pH, and temperature on the properties of Indium hydroxide was investigated using ammonium hydroxide as a precipitant. Crystallite size of each sample was analyzed by X-ray diffraction and the shape and the size of the powder was analyzed by transmission electron microscopy. As a result, the particle size of Indium hydroxide was increased with increase in the concentration of $In(NO_3)_3$ and the particle size and shape of the Indium hydroxide remained unchanged with increase in the pH of the solution. The particle size increased with increase in the precipitation temperature during precipitation.