http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
하석호,김현문 대한방사선 방어학회 1991 방사선방어학회지 Vol.16 No.2
감마선 조사선량의 국가표준을 확립하기 위하여 Co-60 감마선에 대한 조사선량을 절대측정을 수행하였고 그 값이 갖는 오차한계를 분석 평가하였다. 측정기로는 고순도 흑연으로 제작된 원통형 이온전리함을 사용하였고 이온화 전류 측정은 vibrating reed 증폭기를 사용한 전하모드법에 의해 수행되었으며 관련 물리상수 및 각종 관련 보정인자를 평가하여 이온화 전류 측정값으로부터 조사선량률을 결정하였다. Measurement of Co-60 gamma rays has been made for establishment of exposure standard and analyze it's overall uncertainties. Exposure rate determined by the charge mode method using vibrating reed amplifier with cylinderical type cavity chamber. The values of a variety of physical constants and the correction factors are evaluated. The resulting exposure rate is 690.81 R/h at the distance of 1 m from the source and the related uncertainties is ±0.8%.
하석호,김정묵,육종철 대한방사선 방어학회 1991 방사선방어학회지 Vol.16 No.2
외삽형 전리함을 사용하여 90Sr+90Y(1.65mCi) 베타선원에 대해 교정점 30cm 거리에서 조직표면의 흡수선량을 측정하였다. 이때 흡수선량 측정에 영향을 주는 유효단면적, 입사창 감쇠율, 극성효과, 이온 재결합율 등의 보정인자를 분석하였다. 이들 인자를 보정한 후의 조직표면의 흡수선량은 1.4939μGy/sec(±2.9%)로 평가되었다. Beta ray(90Sr+90Y) absorbed dose at tissue surface was measured from the distance of 30cm by use of extrapolation chamber. In the measurement, following factors were considered : effective area of collecting electrode, polarity effect, ion recombination and window attenuation. The measured absorbed dose rate at tissue surface was 1.4939μGy/sec with ±2.9%.
김원식,하석호,황선태 대한방사선 방어학회 1986 방사선방어학회지 Vol.11 No.2
Cs-137 및 Co-60감마선 조사장치를 사용하여 비임의 입체각이고 2.4π×10³sr에서 17.3π×10³sr로 변함에 따라 공기의 산란인자와 두께 2.9㎝납 흡수체 사용에 따른 축적인자를 결정하였다. 그 결과 산란인자는 1~1.064, 축적인자는 1.054~1.194범위의 값을 갖는 것으로 각각 나타났다. 결정된 인자들의 검증을 위하여 계산값과 측정값을 비교한 결과 그 차이는 3.3%이하인 것으로 나타났다. Using Cs-137 and Co-60 gamma-ray irradiation systems, the buildup factors for 2.9㎝ thick lead absorber and the air scattering factors are determined for different beam solid angles from 2.4π×10³sr to 17.3π×10³sr. The corresponding buildup factors are turned out to be the values from 1.054 to 1.194 and the scattering factors to be the values from 1 to 1.064, respectively. To verify our results, calculated values using these factors and experimental values are compared. The differences between them are not more than 3.3%.
Hwang,Sun-Tae,Hah,Suck-Ho,Lee,Youn-Myung,Lee,Kun Jai,Lee,Kyung-Ju 대한방사선 방어학회 1985 방사선방어학회지 Vol.10 No.1
고순도 물질이 Ka형관 X-선을 이용하여 100keV 이하에서의 단색 Photon 선원을 개발하였다. 단색 Photon 은 방사선 측정기기의 교정에 매우 유용한 것으로 얇은 급속박막의 Radiator 에 제동복사선을 조사하여 얻을 수 있다. 본 실험에서는 46Ag, 50Sn, 68Er, 70Yb, 82Pb, 등의 Radiator를 사용하여 20 keV에서 80 keV 의 범위에서 단색 Photon을 얻어내어 고순도 HpGe LEPS로 0.64-0.94에 이르는 단색도를 얻어내었고 600cc얇은창이온전리함을 사용하여 8.3mR/h에서 232.5mR/h 에 이르는 선량률을 얻어 내었다. The development of monoenergetic photon sources using Ka fluorescence X-ray of pure material was carried out in the energy range below 100 keV. The monoenergetic photons are very useful in the calibration of the radiation measuring instruments and can be produced as the Ka fluorescence X-ray by irradiating the bremsstrahlung to the thin pure metal foils called 'radiators'. In this experiment, several radiators such as 47Ag, 50Sn, 68Er, 70Yb, and 822Pb provide the wide monoenergetic photon energy ranging from 20 keV to 80 keV. By the spectrometry with HpGe LEPS, spectral purity factors which measure the monochrometicity for the Ka fluorescence X-ray, were determined as 0. 64-0.94. Dosimetry for the purpose of the determination of the exposure rate with a 600cc thin window ionization chamber, which was calibrated by the standard free-air ionization chamber, was performed. Exposure rates ranging 8.3 ~ 232.5mR/h was obtained according to the Ka fluorescence X-ray energy for each radiator.