http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
단일 주파수로 발진하는 파장 가변 어븀 첨가 광섬유 링 레이저
김륜경,추수호,한영근,Kim, Ryun-Kyung,Chu, Su-Ho,Han, Young-Geun 한국광학회 2010 한국광학회지 Vol.21 No.5
We demonstrate a single-frequency wavelength tunable erbium-doped fiber (EDF) ring laser. We used an unpumped-EDF as a saturable-absorber in order to obtain a stable single-frequency with a narrow-linewidth single-polarization mode in the ring cavity. The lasing wavelength was controlled by using bending-induced strain, such as tension and compression strain corresponding to the bending direction, applied to the fiber gratings. The fiber laser exhibited an output power of -1.85 dBm at a wavelength of 1540.72 nm for a pumping power of ~400 mW. An extinction ratio was measured to be more than 60 dB. The proposed tunable fiber laser maintains nearly the same output power while its lasing wavelength is controlled over in a wavelength range of 5 nm. 본 논문에서는 단일 주파수를 가지는 파장 가변 어븀 첨가 광섬유 링 레이저를 제안하고 실험적으로 구현하였다. 레이저 공진기에 포화 흡수체로서 어븀 첨가 광섬유를 삽입하여 좁은 선폭의 단일 편광모드를 가지고 단일 주파수로 발진하는 광섬유 레이저를 구현하였다. 대칭적 구부림 기술을 이용하여 레이저의 발진파장을 넓게 가변할 수 있으며, 양방향 구부림에 의한 인장력과 수축력을 광섬유 격자 내에 유도하여 약 5 nm 이상의 파장 변환이 가능한 레이저를 구현하였다. 광섬유 레이저는 약 400 mW의 펌프파워를 인가하여 1540.72 nm의 중심파장에서 -1.85 dBm의 출력파워를 가지고 발진하였고, 약 60 dB 이상의 소광비를 보였다. 약 5 nm 이상의 파장범위에서 거의 동일한 출력파워를 유지하며 안정적으로 파장 변환이 가능하였다.
파장 가변 및 스위칭이 가능한 쌍파장 어븀 첨가 광섬유 레이저
박상오,심영보,윤민석,추수호,김현주,권오장,한영근,Park, Sang-Oh,Shim, Young-Bo,Yoon, Min-Seok,Chu, Su-Ho,Kim, Hyun-Joo,Kwon, Oh-Jang,Han, Young-Geun 한국광학회 2010 한국광학회지 Vol.21 No.5
본 논문에서는 파장 가변과 동시에 스위칭이 가능한 쌍파장 어븀 첨가 광섬유 레이저를 실험적으로 구현하였다. 희토류 첨가 광섬유를 이득 매질로 사용하고 두 개의 선형 공진기를 중첩하여 파장 스위칭 효과를 구현하였다. 음향광학 변조기로 두 레이저 발진 파장들 사이에 선택적으로 스위칭하는 기능을 가지면서 동시에 광섬유 격자에 인장력 및 수축력을 인가하여 발진 파장을 가변할 수 있는 기능성 쌍파장 광섬유 레이저를 구현하였다. 제안된 파장 가변형 쌍파장 스위칭 레이저는 높은 소광비와 가변성, 넓은 가변 대역폭, 그리고 빠른 안정응답시간 등 이전의 기술에 비해 더 좋은 장점들을 가지고 있다. 파장 스위치를 하는 모든 경우에 대해 40 dB이상의 높은 소광비를 가지는 고성능의 광섬유 레이저를 구현하였다. 제안된 쌍파장 광섬유 레이저의 출력은 안정적이고 출력 변동은 0.6 dB 이하로 측정되었다. 발진 파장의 가변성 변화는 ~7.2 nm/$m^{-1}$로 측정되었다. A simple technique for a flexibly tunable and switchable dual wavelength-switchable erbium-doped fiber (EDF) laser using fiber Bragg gratings is proposed and demonstrated by using both linear cavity loss controlling and homogeneous gain broadening of the EDF. The oscillating wavelength switching is successfully realized by using the modulation of the acousto-optic modulator driven by the RF signal. The wavelength spacing and lasing wavelength of the proposed wavelength-switchable laser can also be controlled by using the bending-induced tension or compression strain. The proposed tunable dual wavelength-switchable fiber laser has a lot of advantages, such as a high extinction ratio larger than 40dB and a high tunability of ~7.2 nm/$m^{-1}$.