http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
최효현(Hyohyun Choi),임준석(Junseok Lim),김철진(Chuljin Kim),손채훈(Chae Hoon Sohn) 한국추진공학회 2011 한국추진공학회 학술대회논문집 Vol.2011 No.5
본 연구에서는 열분석법을 이용하여 혼합 액체연료의 수치해석에 필요한 여러 가지 인자를 측정하였다. 이러한 열분석법에는 열중량 분석방법(TGA, Thermo-Gravimetric Analyzer)과 시차 주사열량 측정법(DSC, Differential Scanning Calorimetry)이 있다. 열중량 분석방법을 통한 비등온 실험(non-isothermal experimental) 결과를 토대로 Freeman Carroll의 수학적인 후처리 방법을 이용하여 미지의 액체연료의 구성 성분에 대한 동역학적 변수인 활성화 온도와 반응차수로 각각 6128.2 K와 1.4를 얻었다. 그 외 다양한 수학적 처리 방법에 따른 동역학적 변수의 값을 구해보았고, 계산 결과는 처리방법에 따라 약간의 차이를 보였다. Thermal Analyses are conducted to measure various factors of a liquid fuel required for numerical analysis. Thermal Analyses are divided into two different methods of TGA (Thermo Gravimetric Analysis) and DSC (Differential Scanning Calorimetry). Non-isothermal experimental results are analyzed using by TGA. The results are filtered by a Freeman Carroll method. At the same time, chemical parameters of unknown liquid fuel, activation temperature and reaction order are measured to 6128.2 K and 1.4, respectively. Furthermore, the parameters can be obtained by various mathematical methods. It is found that tha parameters depend on the processing method.
모형연소실내에서 헬름홀츠 공명기의 기하학적 형상 인자에 따른 음향 감쇠 특성
최효현(Hyohyun Choi),박이선(I-Sun Park),손채훈(Chae Hoon Sohn) 한국추진공학회 2010 한국추진공학회 학술대회논문집 Vol.2010 No.5
본 연구에서는 로켓엔진 연소기의 음향 불안정 억제를 위해 헬름홀츠 공명기의 음향학적 최적 설계 조건을 해석/실험적으로 연구하였다. 질량-스프링-댐퍼 시스템과의 유사성을 이용한 모델 식의 풀이를 통해 감쇠 성능을 정량화하였다. 헬름홀츠 공명기의 기하학적 형상 인자로 목의 길이와 공동의 크기, 목 및 공동의 직경을 선택하였다. 목의 길이가 짧아지고, 공동의 길이가 길어짐에 따라 흡음성능이 증가하고, 목과 공동의 직경비가 증가함에 따라 흡음성능은 감소하였다. Acoustic design parameters of a Helmholtz resonator are studied experimentally and numerically for acoustic stability in a model acoustic tube. Acoustic damping is quantified by the amplitude of the fluid velocity in mass-spring-damper system. The length of an orifice, the volume of a cavity, and the diameters of an orifice and a cavity in the resonator are selected as design parameters for tuning of the resonator. It is found that acoustic damping capacity is increased by shorter orifice and longer cavity in the resonator. As the ratio of the orifice diameter to the cavity diameter increases in the resonator, the damping capacity decreases.
모바일 디바이스를 사용한 멀티센서 기반 스마트 센서 네트워크의 설계 및 구현
구본현(Bonhyun Koo),최효현(Hyohyun Choi),손태식(Taeshik Shon) 대한전자공학회 2008 電子工學會論文誌-TC (Telecommunications) Vol.45 No.5
무선 센서 네트워크(Wireless Sensor Network : WSN)는 U-City 같은 우리 삶의 편의성 향상을 위한 서비스에 활용은 물론이거니와 환경오염, 터널 및 건축물의 붕괴, 태풍, 지진 등의 재난 감시, 위험물 진단 시스템 등에 다양하게 적용되고 있다. 본 논문에서는 이러한 WSN을 다양한 형태의 휴대 단말 및 네트워크 카메라와 연동하여 보다 효율적이고 가치 있는 정보 서비스 제공을 위한 MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using MObile devices) 시스템을 제안하였다. 제안된 시스템은 IEEE 802.15.4 표준을 기반으로 스마트 센서 네트워크를 구성하며, 또한 제안한 시스템 구조의 활용성 검증을 위하여 다섯가지 응용 센서(자기, 조도, 소리, 모션, 진동)를 가진 망을 구성하여 센싱 이벤트 요청 및 제공 테스트를 수행하였다. Wireless Sensor Networks is applied to improvement of life convenience or service like U-City as well as environment pollution, tunnel and structural health monitoring, storm, and earthquake diagnostic system. To increase the usability of sensor data and applicability, mobile devices and their facilities allow the applications of sensor networks to give mobile users and actuators the results of event detection at anytime and anywhere. In this paper, we present MUSNEMO(Multi-sensor centric Ubiquitous Smart sensor NEtwork using MObile devices) developed system for providing more efficient and valuable information services with a variety of mobile devices and network camera integrated to WSN. Our system is performed based on IEEE 802.15.4 protocol stack. To validate system usability, we built sensor network environments where were equipped with five application sensors such magnetic, photodiode, microphone, motion and vibration. We also built and tested proposed MUSNEMO to provide a novel model for event detection systems with mobile framework.
모바일 기기의 3차원 시각화와 증강현실에 기반한 센서네트워크 모니터링 프레임워크
구본현(Bonhyun Koo),최효현(Hyohyun Choi),손태식(Taeshik Shon) 대한전자공학회 2009 電子工學會論文誌-CI (Computer and Information) Vol.46 No.2
최근 건설 현장에서의 많은 안전사고 발생으로 인해, 건축물의 건전성 감시(Structural Health Monitoring, SHM)에 대한 많은 연구가 진행되고 있다. 이러한 SHM의 활용을 위한 대표적인 적용 기술이 무선 센서네트워크 기술(Wireless Sensor Networks, WSN)이다. 본 논문에서는 이러한 무선 센서네트워크 기술을 바탕으로 카메라가 장착된 휴대단말기에 3D 시각화와 증강현실(Augmented Reality, AR) 기술을 적용한 관찰 가능한 정보의 범위를 확장시켜주는 WIVA(WSN MonItoring Framework based on 3D Visualization and Augmented Reality in Mobile Devices) 시각화 시스템을 제안하였다. 제안된 시스템을 이용해 3층 건물 테스트베드에서의 화재 발생 실험을 수행하였다. 이를 통해, IEEE 802.15.4를 이용한 WSN 데이터를 활용한 3D와 AR 모드에서의 효용성을 검증하였다. Recently, due to many industrial accidents at construction sites, a variety of researches for structural health monitoring (SHM) of buildings are progressing. For real site application of SHM, one of the advanced technologies has known as wireless sensor networks (WSN). In this paper, we proposed WIVA(WSN MonItoring Framework based on 3D Visualization and Augmented Reality in Mobile Devices) system that applies 3D visualization and AR technology to mobile devices with camera based on WSN in order to expand the extent of information can observe. Moreover, we performed experiments to validate effectiveness in 3D and AR mode that utilize WSN data based on IEEE 802.15.4. In real implementation scenario, we demonstrated a fire occurrence test in 3-story building miniature.