http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Eco-Friendly Photovoltaics Based on Stabilized AgBiS2 Nanocrystal Inks
Hyosung Choi(최효성) 한국고분자학회 2021 한국고분자학회 학술대회 연구논문 초록집 Vol.46 No.2
We first report that long-chain ligands of AgBiS2 NCs are replaced with halometallate-based short ligands via solution-phase ligand exchange (SPLE). AgI and BiI3 are used as halometallate sources, and we find that colloidally stable, highly concentrated AgBiS2 NC inks in polar solvents are prepared via SPLE using AgI-based halometallates, enabling one-step deposition suitable for roll-to-roll process. This leads to higher degree of ligand exchange, sharper bandtail, lower trap density, and resultantly higher VOC in devices compared to conventional SSLE. We also first demonstrate that the photovoltaic performance can be improved by introducing ethanedithiol-exchanged AgBiS2 NCs on SPLE-prepared AgBiS2 NC solids because of favorable band alignment and extended depletion width. Thus, this enables improving device performance up to a power conversion efficiency of 4.08% with the highest VOC of 0.55 V among the AgBiS2 NC photovoltaics reported so far.
고효율 페로브스카이트 태양전지 광활성층을 위한 가압열처리 방법
이성범 ( Seongbeom Lee ),김단비 ( Danbi Kim ),정우현 ( Woo Hyeon Jeong ),양현석 ( Hyun-seock Yang ),이보람 ( Bo Ram Lee ),최효성 ( Hyosung Choi ),박성흠 ( Sung Heum Park ),손세모 ( Semo Son ) 한국화상학회 2021 한국화상학회지 Vol.27 No.1
페로브스카이트 태양전지는 빠른 속도로 효율 개선이 이루어지며 차세대 친환경 에너지원으로 각광받고 있다. 가공 매개변수의 영향을 강하게 받는 유-무기 혼합 페로브스카이트 태양전지에서 고품질의 광 활성층을 제조하는 것은 매우 중요하다. 본 연구에서는 Methylammonium Lead Iodide(MAPbI<sub>3</sub>) 광활성층 제작 시, 결정화가 이루어지는 열처리 과정에서 압력을 가함으로써 용매가 증발하는 속도를 조절할 수 있는 가압열처리 공정방법(pressure assisted annealing process, PA method)을 개발하였다. 본 연구에서 개발한 광 활성층 제조방법은 보다 오래 용매를 활성층 내에 머물게 할 수 있어서 MAPbI<sub>3</sub>의 중간단계에서 그레인의 성장을 극대화 할 수 있으며, 이를 통해 고품질 페로브스카이트 광 활성층의 제조를 가능하게 한다. 또한 본 가압열처리 방법으로 형성시킨 페로브스카이트 광 활성층을 도입하여 태양전지를 제조하였을 경우, 소자의 최고 성능은 기존의 방법으로 제조된 소자와 비교하여 24.4 mA cm<sup>-2</sup>의 높은 단락 전류밀도, 0.96 V의 개방전압, 0.75의 필 팩터를 나타내며 17.3 %의 에너지 전환효율을 나타내었다. Perovskite solar cells have been rapidly improved in device efficiency and are in the spotlight as a next-generation eco-friendly energy source. Achieving high-quality photo-active layer influenced by processing parameters is critical to the device performance of organic-inorganic hybrid perovskite solar cells. In this study, a pressure assisted annealing process (PA method) was developed to control the evaporation speed of the solvent inside perovskite layer. By applying pressure during the annealing process for crystallization of the methylammonium Lead Iodide (MAPbI<sub>3</sub>), we could control the evaporation speed of solvent to promote crystal growth of MAPbI<sub>3</sub> which enables to manufacture high-quality perovskite photo-active layers. As a result, the PA device exhibited a high PCE of ~17.3 % with significantly enhanced short-circuit current of ~24.4 mA cm<sup>-2</sup>, an open-circuit voltage of 0.96 V and a fill factor of 0.75.