http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
발변전소 건축구조체를 이용한 대용접지공법 적용사례 연구
최형철(Hyeong Cheol Choi),이남형(Nam Hyeong Lee),장정호(Jung Ho Chang) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
발변전소 및 건축물의 접지설계 절차는 개발예정지에 대해 우선적으로 대지비저항을 측정하고, 측정자료를 기초로 하여 전용해석프로그램의 모의과정을 거쳐 접지물량 및 지락전류 등을 산출하고 있다. 그러나 접지설계 및 시공에 있어서 건축구조물 건립공정 기초 단계인 토공사시 현장 여견의 변화로 설계조건을 만족하지 못하는 경우가 종종 발생되고 있다. 본 논문은 현장여견에 따라 건축구조체 등의 자연구성부재를 이용하여 일반적인 접지방식을 대용하는 공법에 대해 실증사례를 소개하고자 한다.
댐저수지 수면을 활용한 태양광발전시스템 설치에 관한 연구
최형철(Hyeong-Cheol Choi),변일환(Ill-Hwan Byun),이남형(Nam-Hyeong Lee),이성훈(Sung-Hun Lee) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
저수지 수면을 이용한 태양광발전시스템은 저수지, 연못 등의 유휴수면에 부유체를 이용하여 태양광발전시스템을 수면에 설치하는 발전방식이다. 수면의 환경조건은 지상조건에 비해 장애물이 없고 모듈의 온도가 낮기 때문에 일조량 및 발전효율의 증가 등이 예상되고 있다. 지상태양광발전은 농지 또는 임야를 개발하는 과정에서 삼림훼손 등을 유발하는 단점이 있으나, 수면태양광발전은 유효 수면을 적극 활용함으로 국토가 협소한 우리나라에 매우 적합한 발전방식이라 할 수 있다. 본 논문은 한국수자원공사에서 관리하고 있는 주암 다목적댐에 수면태양광실증플랜트를 설치한 사례로 설계 및 시공방법에 대하여 기술하고자 한다.
수도사업장 태양광개발 예정지에 대한 일사량 및 경제성 평가에 관한 연구
최형철(Choi, Hyeong-Cheol),이남형(Lee, Nam-Hyeong),장정호(Chang, Jeong-Ho),나혜란(Na, Hye-Ran) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
The worldwide energy market is enlarging rapidly according to current issues like globalization, deregulation, global warming and strengthening for environmental regulation as well as the energy technology is developing speedily by the add of information and communication techniques. In spite of these advanced techniques in the field of the renewable energy, solar power depends on the governmental aid largely in comparison with other renewable energy sources because of the high initial investment cost. Therefore it is important to investigate scrupulously for the expected erection site of solar power plant from the planning stage. This paper shows actual measurement data of solar radiation of scheduled solar power locations in the waterworks site with consideration of waterworks facilities and regional specialties and presents the data which was analyzed comparably with the radiation data of adjacent locations served by national authorities. In addition, these data were analyzed using RETScreen and used for making decision on the business validity.
일사량 데이터 분석을 통한 태양광발전 시스템 개발을 위한 경제성 평가 방법
이성훈(Sung-Hun Lee),최형철(Hyeong-Cheol Choi),이동근(Dong-Keun Lee),김진오(Jin-O Kim) 한국조명·전기설비학회 2011 조명·전기설비학회논문지 Vol.25 No.10
Recently, interests in renewable energy have gradually increased. Of various renewable energy, Photovoltaic system has the properties affected by weather. This paper discusses the economic evaluation based on insolation data analysis. Real insolation data were obtained by radiation measurement device installed in projected photovoltaic system site during 20 months. Obtained real insolation data were standardized using clear day analysis. Standardized data are greater than obtained real insolation data and were used as parameters of RETScreen for the economic evaluation. In results, capacity(30[kW]) of soon cheon is shown the most B/C(1.20). Applied methods have effectively done to develop photovoltaic system.
확률론적 기법을 이용한 태양광 발전시스템의 일사량데이터 분석
이성훈(Sung-Hun Lee),최형철(Hyeong-Cheol Choi),이은춘(Eun-Chun Lee),김현일(Hyeon-Il Kim),채지석(Ji-Seog Chae) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.7
This paper presents an irradiance Analysis Method for photovoltaic solar energy system as testing which are installed on land and water surface. Irradiance Analysis is developed using probabilistic approach. Scale and shape parameters for Weibull distribution are estimated by real data of irradiance. Statistical data are calculated to compare irradiance on land and water surface. Finally, it is shown that solar energy are generated by irradiance on water surface more than land.
풍력개발예정지에 대한 대지저항률 측정과 해석을 통한 최적 접지설계
장정호(Chang, Jeong-Ho),최형철(Choi, Hyeong-Cheol),이광호(Lee, Kwang-Ho) 한국신재생에너지학회 2008 한국신재생에너지학회 학술대회논문집 Vol.2008 No.05
전력설비에 대한 접지시스템의 근본 목적은 인체에 대한 안정성의 확립과 설비의 기능 향상을 위하여 사고 발생 시 고장 전류를 대지로 안전하고 신속하게 방전시키는데 그 목적이 있다. 풍력발전기 접지설계 시 고려해야 할 중요한 설계 요소는 토양조건, 대지저항률의 측정과 분석, 고장전류, 안전전압 결정 등이 있으며, 이러한 설계 파라미터 가운데 대지저항률은 접지설계 방법 및 물량에 미치는 영향이 결코 작지 않으므로 이에 대한 정확한 측정과 분석을 통하여 효율적인 접지 설계를 시행할 수 있어야 한다.
이광호(Kwang-Ho Lee),최형철(Hyeong-Cheol Choi),오봉근(Bong-Keun Oh),이은웅(Eun-Woong Lee) 대한전기학회 2008 대한전기학회 학술대회 논문집 Vol.2008 No.4
고광역상수도 사업장에서 전력기기의 소손 등으로 발생한 전기사고로 인해 안전사고, 용수공급 중단 등의 위험이 증가하고 있어, 용수공급 시설의 안정적 운영 및 전기 사고시 시설운영의 신뢰성을 확보하기 위해 인입배전선로 이중화, 특고압 수전설비 이중화 및 전동기 기동반 모선분할 등을 실시하여, 유지보수 및 운영 신뢰도 향상을 위한 광역상수도 전력설비 안정성 확보를 기하였다.