http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이산화탄소와 Anisole , Methyl Anisole 이성질체와의 고압 이성분계 상평형
최청송,박상도,김춘호 한국화학공학회 1991 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.29 No.6
상온 상압에서 액상으로 존재하는 방향족 화합물중 anisole과 anisole에 methyl기를 ortho, meta, para 위치에 갖는 2-methylanisole, 3-methylanisole 및 4-methylanisole을 대상으로 이산화탄소와 각각 이성분계를 구성한계에 대해 상태방정식으로 Peng-Robinon(P-R) 식과 perturbed-anisotropic-chain theory(PACT) 식을 이용, 평형상수인 K-factor를 이론적으로 구해 실험치와 비교 검토하여 본 계에 적용되는 이들 상태방정식의 특성을 고찰하였다. Anisole and methyl anisole isomers which containing methyl functional group on anisole at the ortho, meta, para position were chosen as one of the aromatic hydrocarbons and carbon dioxide was chosen as the other component. K-factors obtained by experiment were compared with predictions from the perturbed-anisotropic-chain theory(PACT) and the Peng-Robinson(P-R) equation of state. The characteristics of Peng-Robinson(P-R) equation of state and perturbed-anisotropic-chain theory(PACT) which are applied on these systems were investigated.
침전법으로 제조된 전구체 성질에 의한LiCoO2의 특성에 관한 연구
최청송,정명국,황치석 한국청정기술학회 2006 청정기술 Vol.12 No.2
HT-LiCoO2 powders were synthesized from hydroxide precursors in this study. The cobalt hydroxide compounds with hydrotalcite-like(α-phase) and/or brucite-like(β-phase) structures as a component of the precursor were prepared in various PH conditions using precipitation method. It was found that various phase and compositions of cobalt hydroxides could be tailor-prepared via a careful control of preparation parameters such as the concentration ratio of [OH-]/[Co2+] and aging time. The hydroxides Co(OH)2 and LiOH were mixed with aqueous methyl-alcohol. The precursor of a HT-LiCoO2 was synthesized via subsequent processes including evaporation, drying and aging. The transformation of tailor-made β-phase Co(OH)2 to CoOOH and formation of solid solution in the precursor were achieved during aging. These results cause HT-LiCoO2 to be synthesized at low temperature(600℃) for a short time(10min). 본 연구에서는 수산화물 전구체로부터 HT-LiCoO2 분말을 제조하였다. 사용된 Co(OH)2는 α상 및, 또는 β상의 수산화물이며 여러 조건에서 침전법으로 제조되었다. 제조시에 [OH-]/[Co2+] 농도 비와 숙성시간을 조절함으로써 원하는 특성을 지닌 Co(OH)2 제조가 가능하였다. 침전법으로 합성한 Co(OH)2와 LiOH를 메탄올 수용액을 이용하여 혼합한 후 이어서 증발, 건조 그리고 숙성 조작에 의하여 HT-LiCoO2의 전구체를 합성하였다. 숙성기간에 tailor-made β-phase Co(OH)2는 CoOOH로 변환되면서 고용체를 형성한다. 이 같은 결과로 HT-LiCoO2가 낮은 온도(600℃), 짧은 시간(10분)에 합성이 가능하게 된다.
고압에서 이산화탄소 - Toluene 계의 이성분계 상평형과 밀도의 측정
최청송,박상도,김춘호 한국화학공학회 1990 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.28 No.4
이산화탄소와 방향족 화합물인 toluene과 이성분계 고압상평형 데이타를 얻기 위하여 기상과 액상을 순환시켜 기상과 액상의 상평형을 쉽게 얻을 뿐 아니라 상평형 상태를 육안으로 관찰할 수 있는 circulation 방법의 새로운 상평형 실험장치를 제작 사용하였다. 한편, 실험장치의 재현성과 정확도를 테스트하기 위해 393.2K에서 이산화탄소와 toluene 상평형실험을 수행하여 Ng와 Robinson 데이타와 비교하였으며 비교결과 상당히 좋은 일치를 보였다. 이산화탄소와 toluene의 상평형 실험은 393.2K 외에도 333.2K, 363.2K에서 압력을 딱 4㎫ 정도에서 혼합물 임계점까지 변화시키면서 수행하여 기상과 액상에서의 상평형 데이타 및 혼합물의 밀도를 구하였다. 실험결과 일정한 압력에서 액상에서의 이산화탄소의 용해도는 온도가 증가할수록 감소하였고, 기상에서 toluene의 용해도는 온도가 증가할수록 증가하였으며 혼합물의 밀도는 압력이 증가할수록 기상, 액상 모두에서 혼합물 임계밀도로 접근함을 알 수 있었다. To investigate vapor-liquid equilibrium composition of carbon dioxide-toluene system, a circulation type experimental system circulating both the vapor and liquid phase has been built. A newly built equilibrium apparatus was tested by comparing the measured vapor-liquid equilibrium data for the system carbon dioxide-toluene at 393.2K with those of Ng and Robinson. The binary experiments of carbon dioxide-toluene are conducted to get phase equilibrium and mixture density data at 333.2K, 363.2K in addition to the temperature of 393.2K and pressure from about 4㎫ up to near mixture critical point. As a result, as the temperature increases the solubility of carbon dioxide in liquid phase decreases and the solubility of toluene in vapor phase increases at constant pressure, and at any temperature, both the vapor and liquid densities approach to the mixture critical density as the pressure increases.
가용에너지 전환공정의 열역학적 효율해석 : 제1부 : 가용도 - 엑서지 개념 및 응용 Part Ⅰ ; Availability - Exergy Analysis
최청송,유기풍 한국화학공학회 1985 NICE Vol.3 No.2
In this review article, which includes some new materials, the concepts of availability and exergy are discussed with easy adoption in mind to the efficiency analysis of process and energy facilities. Also discussed are the clarification of the terms; energy, available energy, availability, exergy and anergy together with the exergetic balance. An illustrative application to the medium-Btu coal gasification process is presented by reproducing the work of Gaggoli and Petit for the tutorial purpose. In the application the physical significance of the exergy losses, magnitude and the distribution of these loses in subsystems are interpreted. In Part II, which will appear in the next issue, the contrastive concept of lost energy analysis will be discussed based on the irreversibilities in the actual processes.