RISS 학술연구정보서비스

검색
다국어 입력

http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.

변환된 중국어를 복사하여 사용하시면 됩니다.

예시)
  • 中文 을 입력하시려면 zhongwen을 입력하시고 space를누르시면됩니다.
  • 北京 을 입력하시려면 beijing을 입력하시고 space를 누르시면 됩니다.
닫기
    인기검색어 순위 펼치기

    RISS 인기검색어

      검색결과 좁혀 보기

      선택해제
      • 좁혀본 항목 보기순서

        • 원문유무
        • 원문제공처
        • 등재정보
        • 학술지명
        • 주제분류
        • 발행연도
        • 작성언어
        • 저자
          펼치기

      오늘 본 자료

      • 오늘 본 자료가 없습니다.
      더보기
      • 무료
      • 기관 내 무료
      • 유료
      • KCI등재

        항공기 날개 탑재 안테나의 빔 보상을 위한 X-대역 위상 배열 안테나 모듈

        최우열(Woo-Yeol Choi),서정훈(Jung-Hoon Seo),김현호(Hyun-Ho Kim),백건우(Kun-Woo Baek),홍성용(Sung-Yong Hong) 한국전자파학회 2016 한국전자파학회논문지 Vol.27 No.11

        비행 중 날개 변형에 의해 바뀐 빔 방향을 보상하기 위한 X대역 위상 배열 안테나 모듈을 설계 및 제작하였다. 위상배열 안테나 모듈은 배열 안테나, 전력분배기, 위상변위기 및 제어회로로 구성된다. 최적의 부품 선택을 위해 날개 변형 및 위상변위기의 위상 오차에 의한 방사 패턴의 변화를 시뮬레이션하였다. 제작된 위상 배열 안테나 모듈은 9.375 GHz에서 5.84 dBi의 이득, 13.6 dB의 반사손실, 10.6 %의 대역폭을 얻었다. 주빔 방향 보상 성능을 확인하기 위해 측정 장치를 구축하였다. 측정을 통해 굽힘 변형이 9 %일 때 빔 보상이 정확히 이루어짐을 확인하였다. X-band phased array antenna module for the compensation of deformed beam direction by wing deformation is designed and fabricated. The phased array antenna module consists of array antenna, phase shifter, power divider and control circuit. To select out the best component, the variation of radiation pattern by wing bending and phase error of components is simulated. The fabricated phased array antenna module shows an antenna gain of 5.84 dBi, a return loss of 13.6 dB and a bandwidth of 10.6 % at 9.375 GHz. The test bed was set up to verify the performance of beam direction compensation. This test confirmed that the main beam direction of array antenna has been well restored under wing bending of 9 %.

      • KCI등재

        10 GHz 단일 위상 분주 방식 주파수 분배기 설계

        김지훈,최우열,권영우,Kim Ji-Hoon,Choi Woo-Yeol,Kwon Young-Woo 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.8

        10 GHz까지 동작하는 주파수 1/2 분배기와 주파수 1/4 분배기를 설계하였다. 회로에 사용된 설계 방법은 단일 위상 분주 방식이다. 단일 위상 분주 방식 분배기는 단 하나의 클럭 신호만을 필요로 하고 회로를 구성하는 소자도 크기가 작은 능동 소자로 이루어져 구조가 매우 간단한 장점이 있다. 측정을 통하여 바이어스 전압이 높아질수록 free running 주파수와 동작 주파수 영역이 높아짐을 확인할 수 있었다. 주파수 1/2 분배기와 주파수 1/4 분배기 회로에 바이어스 전압 $3.0{\sim}4.0V$, 입력 파워 16 dBm, 오프셋 전압 $1.5{\sim}2.0V$, 10 GHz 입력 신호를 가했을 때 입력 주파수의 1/2, 1/4에 해당하는 5 GHz, 2.5 GHz의 출력 신호를 각각 얻을 수 있었다. 주파수 1/2 분배기의 레 이 아웃 크기는 $500{\times}500 um^2$이고 측정용 패드와 연결 부분을 제외한 순수한 레이아웃 크기는 $50{\times}40 um^2$이다. Divide-by-2 and divide-by-4 circuits which can operate up to 10 GHz are designed. A design method used in these circuits is the TSPC(True Single Phase Clocking) topology. The structure of the TSPC dividers is very simple because they need only a single clock and purely consist of smalt sized cmos devices. Through measurements, we find the fact that in proportion to the bias voltage, the free running frequency increases and the operation region also moves toward a higher frequency region. For operating conditions of bias voltage $3.0{\sim}4.0V$, input power 16dBm and dcoffset $1.5{\sim}2.0V$, 5 GHz and 2.5 GHz output signals divided by 2 and 4 are measured. The layout size of the divide-by-2 circuit is about $500{\times}500 um^2$($50{\times}40um^2$ except pad interconnection part).

      • KCI등재

        이산화티타튬 페이스트에 TBA 첨가에 따른 염료감응 태양전지의 효율향상 및 전기화학적 분석

        이민오(Minoh Lee),정초롱(Cho-long Jung),최우열(Woo-yeol Choi),조임현(Yimhyun Jo) 한국태양광발전학회 2014 Current Photovoltaic Research Vol.2 No.3

        Dye-sensitized solar cells (DSSCs) are considered as promising alternatives to conventional photovoltaic device. However, commercialization of the DSSCs is restricted due to the low efficiency. In this paper, highly efficiency DSSCs were fabricated by the adding the TBA to the TiO₂ paste. TiO₂ photoanode added 0.2 M TBA in DSSCs are shown the best efficiency of 9.14 %. This result ascribed to improvement of the connection between the TiO2 nanoparticles by the addition of the optimized amount TBA. The morphology of the photoanode was observed by FE-SEM. Further investigation about the kinetics of the electrochemical processes are performed by the EIS analysis. Longest diffusion length was obtained in case adding 0.2 M of TBA to TiO₂ paste, which was matched well with the improved efficiency.

      연관 검색어 추천

      이 검색어로 많이 본 자료

      활용도 높은 자료

      해외이동버튼