http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
로타리 작업에 따른 소형 관리기의 PTO 기어 부하 용량 시뮬레이션
김두한 ( Doo Han Kim ),천원기 ( Won Ki Chun ),김선일 ( Seon-il Kim ),최창현 ( Chang Hyun Choi ),김용주 ( Yong Joo Kim ) 한국농업기계학회 2017 한국농업기계학회 학술발표논문집 Vol.22 No.2
최근 국내 농업은 지속적인 농가 고령화 및 여성농업인의 증가로 인한 다기능, 소형, 경량화의 농업기계의 필요성이 증가하고 있는 실정이다. 이러한 농촌 환경 변화에 대응하기 위해 다양한 작업 기능이 가능한 소형 다목적 관리기의 필요성이 대두되고 있다. 본 연구에서는 소형 관리기에 부하 계측 시스템을 구성하여 로타리 작업을 통한 부하를 측정하였다. 소형 관리기의 부하 데이터 측정을 위해 사용한 부하계측 시스템은 엔진 토크센서, 데이터 수집 장치로 구성하였다. 엔진 토크 센서는 관리기 엔진의 출력축에 있는 벨트 풀리에 토크 센서를 장착하여 부하를 측정하였다. 부하 데이터 수집을 위한 데이터 수집 장치는 National Instrument (NI-6259, NI, USA)를 사용하였다. 측정된 데이터는 작업 시 가장 직접적으로 영향을 많이 받는 PTO (Power Take Off) 기어의 부하 용량(load capacity)을 기어 해석 소프트웨어를 이용하여 분석하였다. PTO 기어의 부하 용량은 안전율, 피로수명을 대상으로 분석하였다. 시뮬레이션 결과, 소형 관리기의 주행 속도 또는 PTO의 회전속도가 증가함에 따라 PTO에 발생하는 평균 부하가 크게 나타났다. 또한 주행 단수 및 PTO 기어 단수가 증가할수록 기어의 안전율과 피로수명이 감소하였다. 따라서 소형 관리기의 주행 속도와 PTO 회전 속도를 저속으로 작업하는 것이 PTO 기어의 수명과 가혹도에 더 유리할 것으로 판단된다.
태양열 이용 축열식 직접접촉 열교환기의 열전달에 관한 연구
강용혁(Kang Yong-Heack),전명석(Jeon Myung-Seok),윤환기(Yoon Hwan-Ki),천원기(Chun Won-Gee) 한국태양에너지학회 1995 한국태양에너지학회 논문집 Vol.15 No.3
태양열 이용 축열식 직접접촉 열교환기의 실제 적용을 위한 작동조건도출 및 열교환기내 열전달 특성 규명을 위하여 작동유체를 물보다 가벼운 경우(Texaterm)와 무거운 경우 두가지를 실제 태양열 집열회로상에서 실험하였다. 작동유체가 물보다 가벼운 경우와 무거운 경우에 대해 실제 태양열 집열회로상에서 작동하여 최적 열전달을 위한 작동유체드럽형성과 유동을 도출하였고, 작동유체가 무거운 경우가 가벼운 경우보다 열손실계수가 높음을 알 수 있었다. 작동유체가 축열유체보다 가벼운 경우와 무거운 경우에 대해 실제 태양열 직열회로에서 실험한 결과, 작동유체가가벼운 경우 체적 열전달계수는 1.848 * 10^-3w/㎤℃, 효율은 73%이고 무거운 경우는 0.128 * 10^-2w/㎤℃, 효율은 82%로 작동유체가 무거운 경우가 보다 좋은 것으로 나타났다. The Direct Contact heat Exchanger (DCHX) has been widely studied in the chemical industry for many years due to its inherent simplicity as a counter-current divice for heat and mass transfer. In many solar systems, the DCHX unit can be combined with the thermal storage unit, or alternatively, it can be used separately from the storage unit, much like an external (to storage) closed heat exchanger system. In the present work, the spray column type of direct contact heat exchangers are studied extensively to harness the solar energy for hot water and spaced heating. Some of the major considerations that are involved in the design of heat exchangers in this study are that: working fluid is a hydrocaabon (such as Texaterm) or water which is either lighter or heavier than storage medium. The experimental data have revealed some interesting characteristics concerning the application of DCHXs for solar energy utilization.<br/> These experiments are carried out in the line of solar heating system, major results are as follows:<br/> I) the flow and aspect of working fluid drop for maximum heat transfer<br/> 2) Efficiency and volumetric heat transfer coefficient of D.C.H.X with a heavier working fluid are higher than those of D.C.H.X with a lighter working fluid.
장선호(Sun-Ho Jang),홍형길(Hyin-Ggil Hong),윤해룡(Hae-Yong Yun),강민수(Min-Su Kang),박관형(Kwan-hyung Park),권태희(Tae-hee Kwon),천원기(Won-Ki Chun),김대현(Dae-Hyun Kim),조용준(Yongjun-Jin Cho) 한국기계가공학회 2024 한국기계가공학회지 Vol.23 No.3
This paper addresses the challenges posed by an aging population and declining interest in agriculture, leading to a decrease in rural population and domestic agricultural competitiveness in South Korea. To bolster productivity in the face of a rising proportion of elderly farm managers and diminishing agricultural land area, the paper explores the integration of autonomous farming equipment modules with Agricultural Robots. These modules aim to enhance efficiency and performance across various crop types and cultivation methods, while their user-friendly features make them accessible to elderly and female farmers, thereby maximizing productivity. The study evaluates the modules based on stability, convenience, eco-friendliness, high efficiency, and automation. By promoting advanced technologies like autonomous control and robotic integration, this research aims to address challenges related to an aging agricultural workforce and boost overall agricultural productivity.