http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이중섭(Chung Seub Yi),정휘원(Hwi Won Jeong),장성철(Sung Cheol Jang),남태희(Tae Hee Nam),박중호(Jung Ho Park),윤소남(So Nam Yun) 대한설비공학회 2008 대한설비공학회 학술발표대회논문집 Vol.2008 No.2
This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water(H₂O). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.
등방성 이종재료 내의 Ⅴ-노치 균열에 대한 응력강도계수 결정에 관한 연구
조상봉,정휘원,김진광 경남대학교 신소재연구소 1999 論文集 Vol.11 No.-
접합계면 V-노치 균열 문제는 고유치와 고유벡터 문제로 수식화할 수 있다. V-노치 균열첨단에서 응력특이성을 가지는 고유치가 존재한다. 상반일 등고선 적분법(RWCIM)은 고유치와 관련된 고유벡터의 계수를 구하는 한 가지의 방법이다. 상반일 등고선 적분법을 이용하여 접합계면 균열의 응력확대계수를 구하도록 시도하였다. 상반일 등고선 적분법으로 구한 응력확대계수와 경계요소법과 변위외삽법을 이용하여 구한 결과를 비교하였다. An inteiface 17-notched crack problem can be formulated as a eigenvalue problem. there are the eigenvalues which give stress singularities at the V-notched crack tip. The RWCIM is a method of calculating the eigenvector coefficients associated with eigenvalues. Obtaining the stress intensity factors for an interface crack in dissimilar materials was examined by the RWCIM. The results obtained for stress intensity factors using RWCIM were compared with those obtained by using the displacement extrapolation method and the BEM.