http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
얇은 히터 thermal activity의 올바른 결정을 위한 가열 방법에 따른 실질 가열 두께 연구
정우현(Woo Hyun Jung),조항진(HangJin Jo) 대한기계학회 2020 대한기계학회 춘추학술대회 Vol.2020 No.12
In various industrial field such as nuclear engineering (fuel cladding) and electronics (chip cooling), a critical heat flux of thin heater are getting a lot of interests due to its unusual characteristic, lower CHF value than the thick heater. In case of the thin heater, generally the critical heat flux has a tendency to decrease as the thickness of heater decreased. This phenomenon is interpreted as the thermal property effect of heater, represented by the thermal activity parameter that is composed of heater thickness, density, thermal capacity, and thermal conductivity. In this paper, it is claimed that the heater thickness parameter could be changed according to the heating method; Joule heating method (direct heating) or conduction heating methods (direct heating). By solving the conduction problem of heater numerically with the dry patch mechanism concept for the CHF, giving thinner thickness for the Joule heating method as an effective heating thickness showed consistency on the numerical results.
디스플레이 장치의 특성에 따른 순간 제시 자극의 정확성 비교
정우현(Jung Woo Hyun),정지연(Jung Jiyeon) 한국HCI학회 2021 한국HCI학회 논문지 Vol.16 No.3
시각심리학에서 실험 자극을 정확히 제시하기 위해서는 디스플레이 장치의 특성을 이해하는 것이 중요하다. 특히 자극을 아주 짧은 순간 동안만 제시하는 ‘순간 제시 연구’에서는 디스플레이 장비에 따라 연구자의 의도와는 다른 자극 형태가 제시될 수도 있다. 자극이 완전히 출현하기까지의 시간과 자극 잔상의 지속 시간을 디스플레이 장비별로 측정하여 순간 제시 정확성을 비교하였다. 디스플레이 장비로 CRT, scanning backlight LCD, sample-and-hold LCD가 사용되었다. 측정 결과 자극 출현 시점은 sample-and-hold 모니터가 더 빠른 양상을 보였지만 CRT 모니터 및 scanning backlight LCD 모니터와 큰 차이는 나지 않는 것으로 나타났다. 잔상이 사라지는 시점은 자극의 종류와 상관없이 일관적으로 CRT 모니터와 scanning backlight LCD 모니터에서 짧게 나타났다. Sample-and-hold LCD 모니터는 전반적으로 잔상이 오래 남았으며 이러한 경향은 화면 제시 빈도가 낮을수록 강하게 나타났다. 자극의 순간적인 제시가 필요한 연구에서는 sample-and-hold LCD 모니터가 정확한 자극이 제시되지 못할 가능성이 있으며 CRT 또는 scanning backlight LCD를 쓰는 것이 더 적절함을 보여준다. It is important to understand the characteristics of display devices in the study of briefly presented visual stimuli. To compare the accuracy of briefly presented stimuli, the time of stimulus appearance and duration of afterimage was measured for each display. CRT, scanning backlight LCD, and sample-and-hold LCD were used. As a result of the measurement, the time of stimulus appearance was faster in the sample-and-hold monitor, but there was little difference between the CRT monitor and the scanning backlight LCD monitor. The time at which the afterimage disappeared was consistently short in the CRT monitor and the scanning backlight LCD monitor. Sample-and-hold LCDs generally left afterimages for a long time, and this tendency was stronger as the refresh rate was lower. It suggests that it is more appropriate to use a CRT or scanning backlight LCD rather than a sample-and-hold LCD in studies that require a brief presentation of stimuli.
Listening Activities in Korean EFL Contexts:Bottom-up, Top-down, and Interactive Types
정우현(Woo-hyun Jung) 한국외국어교육학회 2004 Foreign languages education Vol.11 No.2
This paper deals with an information processing dimension of listening activities. The main purpose of the study is to investigate how selected listening activities proposed by Peterson (1991) and Brown (2001) for ESL contexts are employed by students in Korean middle schools, high schools, and universities, with special attention to different types of listening processing: bottom-up, top-down, and interactive. Using a questionnaire survey, data were collected from 600 students to identify their use of listening activities. The results indicated that the listening activities used by Korean students were generally limited in variety and were not in accordance with their education levels. The learners in general resorted to the top-down type most frequently. An investigation of how each education group (middle school, high school, and university) employs different types of listening activities revealed that each group employed the top-down type most frequently, lacking the bottom-up and interactive types. On the basis of the results, pedagogical implications are discussed and suggestions are made for activating listening activities, which is in turn expected to lead to learners’ increased listening competence.
오정우 ( Jung-woo Oh ),이성경 ( Sung-kyung Lee ),조재운 ( Chea-un Cho ),최영재 ( Yeong-jae Choe ),현보라 ( Bo-ra Hyun ),정은영 ( Eun-young Jeong ),강정훈 ( Jung-hoon Kang ) 한국환경생태학회 2021 한국환경생태학회 학술대회지 Vol.2021 No.2
산양(Naemorhedus caudatus)은 동북아시아, 러시아, 중국, 한국의 고산지대에 분포하고 있다. 국내에서는 천연기념물 및 멸종위기종 1급으로 지정되어 있으며, 세계자연보전연맹 적색 목록(IUCN Redlist)에 취약등급(VU)으로 지정되어 있다. 머리의 형태를 이루는 두개골(Skull)은 외관상 하나의 뼈처럼 보이지만 많은 뼈들이 서로 밀접하게 결합하여 이루어진 구조이다. 두개골은 대뇌, 소뇌, 연수 등 뇌 조직을 싸고 있는 뇌두개와 코와 입을 구성하는 안면으로 구분된다. 하악골(Mandibulae)의 형태는 동물의 섭식습성이나 저작운동의 형태와 강도에 따라 근육의 발달정도에 차이를 나타내기 때문에 근육의 부착점인 하악골의 발달정도의 차이를 나타내며, 이빨의 개수 및 배열상태, 치아궁의 형태에 따라 많은 차이가 있다. 산양의 두개골 및 하악골에 대한 계측학적 연구는 생후 1령의 산양을 계측한 이홍식(1993)과 이성준(1994)의 선행연구를 참고하였으며, 1령의 경우 골격 및 신체가 완전한 성장이 이루어진 상태가 아니기 때문에 산양의 성체만을 대상으로 두개골과 하악골의 측정 데이터를 계측학적 측면에 활용될 수 있는 기초자료를 제공하는데 있다. 일본산양(Capricornis crispus)의 경우 주요 계측치가 통계적으로 암수차가 없다는 점을 근거하여, 연령 및 이력이 있는 (사)한국산양보호협회의 개체 14마리를 암수 구분 없이 선정하였다. 후두골과 환추골 사이를 절단하여 두개부를 분리하고 증류수에 중불로 6시간 끊인 후 연조직을 제거하여 골격표본을 제작하였다. 10~15령 미만은 6마리, 15령 이상은 8마리로 분류하였고, 두개골은 Driesch(1976), 하악골은 Nishida and Hayashi (1983)가 제시한 계측점 측정법을 참고하여 두개골은 25개, 하악골은 14개의 계측점을 버니어캘리퍼스(Mitutoyo, CD-15 PSX, JP)로 0.01㎜단위까지 측정하였다. 연령별로 계측부위에 차이가 있는지 맨-휴트니검정(Mann-Whitney U test, p<0.05)하였고, 각 측정부위별로 상관분석을 실시하였다. 분석결과, 두개골과 하악골 모두 연령별로 유의성은 없었으며, 10령 이상의 산양은 두개학적 측면에서 통계적으로 같은 성체인 것을 알 수 있었다. 그렇기 때문에 하나의 성체집단으로 보고 두개골과 하악골의 상관분석을 실시하였으며, 그 결과 두개골은 두개골길이와 두개바닥길이, 두개골길이와 구개길이, 두개바닥길이와 구개길이, 안와사이폭과 안면높이, 오른쪽뿔과 왼쪽뿔길이에서 높은 상관관계를 보였다. 하악골은 하악골길이와 턱끝부터 관절돌기까지 길이, 하악골길이와 하악패임부터 안면혈관패임_____까지의 길이, 턱끝부터 관절돌기까지의 길이와 하악패임부터 안면혈관패임까지의 높이, 관절돌기부터 안면혈관패임까지의 길이와 하악패임부터 안면혈관패임까지의 높이, 하악골길이와 이빨틀 사이모서리 길이, 턱끝부터 관절 돌기까지 길이와 이틀사이모서리 길이, 양쪽 하악골사이 최대 폭과 양쪽 마지막큰어금니사이 폭에서 높은 상관관계가 있었다. 특히 두개골길이는 두개바닥길이, 구개길이와 밀접하게 영향을 주는 부위인 것을 알 수 있었고, 하악골길이는 턱끝부터 관절돌기까지의 길이, 하악패임부터 안면혈관패임까지의 높이, 이빨틀 사이모서리의 길이와 밀접한 관계가 있는 것을 알 수 있었다. 이러한 계측부위는 성장하며 골격의 크기가 커짐에 따라 성장기준이 되는 계측점으로써의 역할과 골격의 형태를 결정짓는 부위인 것으로 판단된다. 향후 충분한 샘플을 확보하여 연령별 계측학적 분석을 통해 성장요소의 부위별 차이를 규명하는 연구를 추가적으로 실시할 계획이다.
반도체 클린룸 전용 외기조화기의 연간 에너지 사용량 분석 및 개선 방안 연구
정우현(Woo Hyun Jung),송두삼(Doo Sam Song) 대한설비공학회 2022 대한설비공학회 학술발표대회논문집 Vol.2022 No.6
본 연구는 반도체 클린룸 전용 외기조화기(외조기)의 연간 에너지 사용량 분석 및 Case Study를 통한 에너지 절감 가능성을 검토 하였다. Base Case는 대형 클린룸에 많이 사용하고 있는 증기가습과 단열가습이 혼합된 조건의 외조기, Case1은 증기가습을 없애고 단열가습 100% 조건으로 설계한 외조기, Case2는 증기가습을 없애고, 단열가습을 2단으로 적용하고 가열코일에 공급하는 열원을 증기열원이 아닌 냉동시스템에서 발생하는 냉각수 폐열을 사용하는 조건으로 설계된 외조기이다. 분석결과, Case1의 경우 Base Case보다 에너지 사용량이 약 11% 가량 감소하였으며, Case2의 경우는 Base Case 보다 약 22% 감소하는 결과를 보였다. 반도체 클린룸의 에너지 소비의 상당부분을 차지하는 외조기를 단열가습과 냉각수 폐열 활용하는 구성을 통해 많은 에너지 절감이 가능함을 확인하였다.