http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
덖음 시간에 따른 감국(Chrysanthemum indicum L.) 차의 이화학적 특성
유정식(Jung Sik Yu),황인국(In Guk Hwang),우관식(Koan Sik Woo),장영득(Young Deug Chang),이철희(Chul Hee Lee),정정학(Jeong Hag Jeong),정헌상(Heon Sang Jeong) 한국식품과학회 2008 한국식품과학회지 Vol.40 No.3
덖음 처리가 감국차의 품질 특성에 미치는 영향을 살펴보고자 감국 꽃을 230℃에서 5, 7.5, 10, 12.5 및 15분간 덖음 처리 후 감국 꽃 침출액을 제조하여 품질특성을 조사하였다. 덖음 시간이 길어질수록 L 및 a 값은 감소하고 b 값은 증가하여 차의 색은 점차 황색을 나타내었으며, 총 질소함량은 3.15-3.33%의 범위를 보였고 구성 아미노산은 감칠맛의 주성분인 glutamic acid를 비롯하여 18종이 분석되었으며, 이들 중 glutamic acid와 aspartic acid가 가장 많은 비율을 차지하였다. Chlorophyll 함량은 덖음 시간이 길어질수록 감소하는 경향을 나타내었다. Tannin, 총 폴리페놀 및 플라보노이드 함량은 덖음 시간에 따라 대체적으로 증가하는 경향을 보였으며, 15분 덖음 시 각각 0.63 ㎎ gallic acid equiv./g, 13.85 ㎎ tannic acid equiv./g 및 9.77 ㎎ catechin equiv./g이었다. 전자공여능은 15분 덖음 시 9.93%, 총 항산화력은 10분 덖음 시 19.33 ㎎ ascorbic acid equiv./100 g으로 대조구보다 높은 항산화 활성을 나타내었다. 덖음 감국 꽃차의 관능검사 결과 색은 12.5분, 맛과 향 및 종합적 기호도는 10분 덖음 처리된 차가 가장 우수한 것으로 나타났다. In this study, Chrysanthemum indicum L. flower tea was prepared according to different pan-firing times (5, 7.5, 10, 12.5, and 15 min) and its quality characteristics were investigated. Total nitrogen and tannin contents increased with increasing pan-firing time, whereas chlorophyll and total amino acid (AA) contents decreased. The total AA contents of the samples ranged from 6,399 to 7,068 ㎎%, and the highest content (7,068 ㎎%) was found with the 10 min panfiring treatment. The AAs occurring in the C. indicum L. flower tea included glutamic acid and aspartic acid, which are desirable flavor components. As the pan-firing time increased, antioxidant activity as well as total polyphenol and flavonoid contents increased. The highest total polyphenol and flavonoid contents were found in the 15 min treatment at levels of 13.85 ㎎ tannic acid equiv./g and 9.77 ㎎ catechin equiv./g, respectively. The 15 min pan-firing treatment also had the highest total antioxidant activity at 19.33 ㎎ ascorbic acid equiv. eg/100 g. Finally, based on sensory evaluations, the 10 min pan-fired C. indicum L. flower tea had the best overall quality.
마그네슘 박판의 전자부품 적용을 위한 마이크로 디버링에 관한 연구
이정인,김태완,곽재섭,정영득,Lee, Jung-In,Kim, Tae-Wan,Kwak, Jae-Seob,Jung, Young-Deug 한국금형공학회 2012 한국금형공학회지 Vol.6 No.2
Drill process is usually used to manufacture a industry about processing, Therefore, the burr problem is very significant, The burrs took place when drill process. And then, sometimes, the burrs are often caused of some problems during automatic such as no good quality products and having good surface roughness products. And also, this paper had some experiments using magnesium. Specially, the magnesium is one of the non-ferromagnetic materials. Magnesium has attracted a lot of interest for using the industry. They offer a possible alternative to steel and aluminum in automotive and aero industries to satisfy the lightweight requirement. also, magnesium has good specific strength and absorbs vibration in occurring working process. So, it has good quality of product processing. And then, it is one of the lightest materials being used to electronic product's cases and automotive because of lightweight and miniaturization. But this material has not widely used all of the industry due to its natural property. If the magnesium is contacted water, it will cause the exploration. But, nowadays many of people study magnesium to safe their experiment and to widely use this industry.
노트북 케이스용 마그네슘의 자기연마가공에서 영구자석의 효과
김상오,강대민,곽재섭,정영득,Kim, Sang-Oh,Gang, Dea-Min,Kwak, Jae-Seob,Jung, Young-Deug 한국금형공학회 2012 한국금형공학회지 Vol.6 No.2
In previous study, it showed that the MAP was greatly effective polishing process for magnesium plate. But it had lower efficiency than magnetic materials such as SM45C. It was very difficult to cut non-magnetic materials using the MAP process because the process was fundamentally possible by help of a magnetic force. This study aimed to verify analytically formation of the magnetic field in a case of the non-magnetic materials especially focused on magnesium plate. So, In this study, the magnetic density flux was predicted using simulation program. As a result, the magnetic density flux was lower at the center of pole on inductor than outside. It had same result on the experimental verification. And magnetic force was lower according to increase of working gap. So, to improve the magnetic force, permanent magnet was installed under the workpiece. In that case, the magnetic density flux not only at center but also at outside of pole was increased. Therefore, the efficiency of magnetic abrasive polishing was also increased. A design of experimental method was adopted for assessment of parameters' effect on the MAP results of magnesium plate for improving the magnetic force.