전안부 빛간섭단층촬영기를 이용한 백내장 절개창의 크기에 따른 창상치유과정의 형태학적 관찰

김진형,김태임,김응권,이형근,Jin Hyung Kim,Tae Im Kim,Eung Kweon Kim,Hyung Keun Lee 대한안과학회 2013 대한안과학회지 Vol.54 No.6

Purpose: To investigate wound characteristics and ultrastructural changes in the 2.2-mm and 2.8-mm main corneal incisions. Methods: Forty-four eyes of 34 patients undergoing cataract surgery were randomized to receive a 2.2-mm or 2.8-mm main corneal incision. All incisions were evaluated 1, 7, and 30 days postoperatively using anterior segment optical coherence tomography. The angle, length, maximal thickness of the incision, and if present, corneal gap length and incision gap area were calculated. The existence of Descemet’s membrane detachment was recorded. Results: The mean endothelial gap length and gap area of the 2.2-mm wound were larger than the 2.8-mm, with the only statistically significant difference observed on postoperative day 30 (p = 0.015 and 0.027, respectively). There was no difference in the mean incision angle, length, and corneal thickness between the 2 incision sizes. The ratio of Descemet’s membrane detachment increased with older age and low postoperative IOP, but not associated with incision size (p < 0.05). Conclusions: Both the 2.2-mm and 2.8-mm main corneal incisions showed excellent wound healing outcome without significant postoperative complications. Older patients with low postoperative IOP required a more careful wound care management. The incision parameters in the present study can be used as an indicator of the healing process to reduce wound-related complications.

브랜드 한우고기 연도 조사 - 2007 : 육질등급 및 소분할 부위별 전단력 평가

김진형,성필남,조수현,정다운,인태식,정진형,박범영,이종문,김동훈,안종남,Kim, Jin-Hyoung,Seong, Pil-Nam,Cho, Soo-Hyun,Jeong, Da-Woon,In, Tae-Sik,Jeong, Jin-Hyung,Park, Beom-Young,Lee, Jong-Moon,Kim, Dong-Hun,Ahn, Chong-Nam 한국축산식품학회 2008 한국축산식품학회지 Vol.28 No.3

Eight subprimal cuts purchased from the branded Hanwoo beef of 3 quality grades ($1^{++}$, $1^+$, 1) at 13 stores were evaluated the tenderness using Warner-Bratzler shear (WBS). The beef frequency ratio (%) depending on postmortem aging periods were investigated. The 37.5 (quality grade $1^{++}$), 45.8 (quality grade $1^+$), and 36.4% (quality grade $1^{++}$) of branded beef were aged for < 7 d, 26.6 (quality grade $1^{++}$), 47.2 (quality grade $1^+$) and 36.4% (quality grade 1) were aged for $7{\sim}13$ d, and 31.3 (quality grade $1^+$), 4.2 (quality grade $1^+$) and 25.8% (quality grade $1^+$) were aged for 14 to 20 d. The temperature of cold room in stores was ranged average 2.27 to $2.42^{\circ}C$. WBS values for ansimsal (tenderloin), witdngsimsal (ribeye), cheggtsal (shortloin), doganisal (knuckle) and moongchisatae (hind shank) from branded Hanwoo beef of quality grade $1^{++}$ were tender than those from branded Hanwoo beef of quality grade 1 (p<0.05). WBS values for ansimsal (tenderloin) were 2.56 (quality grade $1^{++}$), 2.76 (quality grade $1^+$) and 3.10 kg (quality grade 1), respectively, and those for doganisal (knuckle, quality grade $1^{++}$), hongdukesal (eye of round, quality grade $1^+$) and bosupsal (top sirloin, quality grade 1) were 4.76, 4.96 and 5.66kg, respectively (p<0.05). The frequency ratio (%) of WBS < 3.9 kg in the all subprimal cuts from branded Hanwoo beef of quality grade $1^{++}$ were 100 [ansimsal (tenderloin) and cheggtsal (shortloin)], 87.5 [witdngsimsal (ribeye)] and 62.5% [bosupsal (top sirloin)], whereas that of WBS > 4.6 kg were 50.0% [hongdukesal (eye of round) and doganisal (knuckle)]. The frequency ratio of WBS < 3.9 kg in the an subprimal cuts of quality grade $1^+$ were 100 [ansimsal (tenderloin) and witdngsimsal (ribeye)] and 44.4% [cheggtsal (shortloin) and gurisal (chuck tender)], whereas that of WBS > 4.6 kg were 66.7 [hongdukesal (eye of round)], 55.6 [doganisal (knuckle)] and 44.4% [bosupsal (top sirloin)]. The frequency ratio (%) of WBS < 3.9 kg in the all subprimal cuts of quality grade 1 were 88.9 [ansimsal (tenderloin)], 62.5 [cheggtsal (shortloin)] and 44.4% [witdngsimsal (ribeye)], whereas that of WBS > 4.6 kg were 100.0 [doganisal (knuckle)] 62.7 [hongdukesal (eye of round)], 62.5 [gurisal (chuck tender)] and 55.6% [moongchisatae (hind shank)]. From these results, subprimal cuts from branded Hanwoo beef were marketed with short aging periods and high frequency ratio (%) of WBS > 4.6 kg.

한우 성숙도와 추출횟수가 사골용출액의 화학적 특성에 미치는 영향

김진형,조수현,성필남,하경희,정진형,임동균,박범영,이종문,김동훈,안종남,Kim, Jin-Hyoung,Cho, Soo-Hyun,Seong, Pil-Nam,Hah, Kyung-Hee,Jeong, Jin-Hyung,Lim, Dong-Gyun,Park, Beom-Young,Lee, Jong-Moon,Kim, Dong-Hun,Ahn, Chong-Nam 한국축산식품학회 2007 한국축산식품학회지 Vol.27 No.4

본 연구는 시중에 유통중인 한우 사골의 과학적인 거래기준을 제시하고자 성숙도 2(수소), 성숙도 2(거세), 성숙도 3-9(암소)의 한우 반도체 각 4두에서 사골(상완골, 전완골, 대퇴골, 하퇴골)을 구입하여 총 4회 추출한 사골 용출액의 탁도와 색도(명도), 콜라겐과 단백질 함량, 칼로리 및 콘드로이친 황산 함량을 분석하였다. 성숙도 2에 해당하는 한우 수소와 거세우 사골 용출액의 탁도와 명도가 성숙도 3부터 9에 해당하는 한우 암소 사골용출액 보다 유의적으로 높게 나타났다(p<0.05). 추출횟수에 따른 탁도와 명도의 변화는 전체 성숙도에서 2차 추출까지 증가하다가 이후 유의적으로 감소하였다(p<0.05). 성숙도 2에 해당하는 한우 수소와 거세우 사골 용출액의 콜라겐과 단백질 함량이 가장 높게 나타났다(p<0.05). 성숙도 2에 해당하는 한우 수소와 거세우 사골 용출액의 칼로리와 콘드로이친 황산 함량이 성숙도 3부터 9에 해당하는 한우 암소 사골용출액 보다 유의적으로 높게 나타났다(p<0.05). 또한 추출횟수에 따른 콘드로이친 황산 함량 변화는 전체 성숙도에서 추출횟수가 증가 할수록 유의적으로 감소하였다(p<0.05). 이상의 결과를 종합하면, 전체 실험항목에서 성숙도 2(수소와 거세우) 사골용출액과 성숙도 3-9(암소) 사골용출액 간에는 차이가 있었으나, 전체 성숙도에서의 차이는 뚜렷하게 나타나지 않아 성숙도가 사골거래기준으로 적합한지는 보완적인 연구가 추가적으로 수행되어야 할 것으로 사료된다. This study was conducted to investigate the effect of maturity scores [2 (bull), 2 (steer), 3-9 (cow)] and the number of extractions (up to 4 times) on the chemical properties of water extract from Hanwoo shank bones (arm, fore shank, round and hind shank). The turbidity, meat color (CIE L value), collagen, protein, caloric and chondroitin sulfate contents of samples were observed. The turbidity and lightness were higher for water extract of Hanwoo shank bones with a maturity score of 2 (bull and steer) than maturity scores of 3-9 (cow) (p<0.05). The turbidity and lightness of water extract from shank bones of all Hanwoo maturity scores significantly increased with the 1st and 2nd extractions, but significantly decreased with 3rd and 4th extractions (p<0.05). The collagen and protein contents were highest for water extract from Hanwoo shank bones of maturity score 2 (bull and steer) (p<0.05). The caloric and chondroitin sulfate contents were higher for water extract from Hanwoo shank bones of maturity score 2 (bull and steer) than maturity scores of 3-9 (cow) (p<0.05). As the number of extractions increased, the chondroitin sulfate content significantly decreased (p<0.05). Based on these results, differences correlating with maturity scores were found only with collagen and protein contents. Therefore, further studies should be considered to address whether different maturity scores affect the price of shank bones in the meat industry.

전산해석을 통한 키로플러스 사파이어 단결정 성장공정의 유동 및 remelting 현상 분석

김진형,박용호,이영철,Kim, Jin Hyung,Park, Yong Ho,Lee, Young Cheol 한국결정성장학회 2013 한국결정성장학회지 Vol.23 No.3

사파이어($Al_2O_3$) 단결정 웨이퍼는 청색 LED(light emitting diode) 제작을 위한 핵심 소재로 사용되고 있으며, 사파이어 단결정의 품질에 따라 LED의 성능이 크게 좌우하게 된다. 여러 가지 사파이어 단결정 제조방법 중 키로플러스(Kyropoulos)법은 도가니 직경에 근접한 크기로 잉곳 생산이 가능하며, 내부 전위밀도가 낮아 고품질의 대구경 사파이어 잉곳 제작이 가능하다. 키로플러스법 공정에서 용융 알루미나의 유동은 seed의 성장 형태, 도가니 및 단열재의 형상에 영향을 받으며, 유동양상에 따라 단결정 사파이어 잉곳의 품질이 좌우된다. 특히 온도구배는 hot-zone 내부의 히터 구조와 밀접한 관련이 있으므로 본 연구에서는 도가니 단위표면적당 하부와 측면 히터의 발열비율에 따른 CFD(computational fluid dynamics) 해석을 실시하고, 해석결과를 토대로 각각 용융 알루미나의 유동 및 remelting 현상에 대해 분석하였으며, 이상적인 히터 발열비율을 도출하였다. Sapphire wafers are used as an important substrate for the production of blue LED (light emitting diode) and the LED's performance largely depends on the quality of the sapphire single crystals. There are several crystal growth methods for sapphire crystals and Kyropoulos method is an efficient way to grow large diameter and high-quality sapphire single crystals with low dislocation density. During Kyropoulos growth, the convection of molten melt is largely influenced by the hot zone geometry such as crucible shape, heater and refractory arrangements. In this study, CFD (computational fluid dynamics) simulations were performed according to the bottom/side ratios (per unit of the crucible surface area) of heaters. And, based on the results of analysis, the molten alumina flows and remelting phenomena were analyzed.

온톨로지 기반의 컨택스트 정보 모델링 기법

김진형,황명권,정한민,Kim, Jin-Hyung,Hwang, Myung-Gwon,Jung, Han-Min 한국디지털콘텐츠학회 2011 한국디지털콘텐츠학회논문지 Vol.12 No.4

유비쿼터스 컴퓨팅 환경에서는 주변 환경에 의해 발생하는 방대한 컨택스트 정보에 대한 모델 정의와 컨택스트 인지를 통한 지능적인 서비스 제공을 위하여 컨택스트 정보 처리, 관리 및 추론과 관련한 연구가 필수적으로 요구된다. 그러나 현재 컨택스트 인지 분야에서는 고수준의 서비스 지원을 위한 온톨로지 특성을 효과적으로 반영한 모델링 기법이 부재하며, 지능적인 추론(응용, 조합)을 지원하는 기법 부재 및 컨택스트 정보간 상호운용성 지원의 한계를 가지고 있다. 따라서 본 연구의 최종 목표는 실세계에 존재하는 실체(entity)에 대한 상태를 특징화하고 정의하기 위한 방법으로 육하원칙을 적용한 온톨로지 기반의 컨택스트 인지 모델링 기법 컨택스트 인지를 위한 육하원칙 온톨로지를 개발하고 보다 양질의 지능화된 컨택스트 인지 서비스를 제공하기 위해 컨택스트 정보에 대한 관리 및 컨택스트 추론을 지원하는 프레임워크를 개발함에 있다. Ubiquitous Computing is required to define models for broad context information occurrence by surrounding environment and to study how to model a mechanism for selectively collecting useful pieces of context information and providing relevant intelligent services. Further, studies are also required as to process of context information, and its maintenance and reasoning. However, current context-aware research area still lacks modeling technique that reflects the characteristics of ontology effectively for providing relevant intelligent services. It has also limitation about context reasoning and interoperability among context information. Therefore, this paper proposes ontology-based context-aware modeling technique and framework enabling efficient specification of context information for providing intelligent context-aware services that support context management and reasoning.

경천사10층석탑 오염물 제거 방안 연구-레이저를 이용한 오염물의 제거 방안 중심으로

김진형,김사덕,강대일,청목번부,Kim, Jin-Hyung,Kim, Sa-Dug,Kang, Dai-Ill,Aoki Shigeo 국립문화재연구소 2002 保存科學硏究 Vol.23 No.-

It has been proved that pollutants stuck on the surface of stone architecture have significant direct and indirect harmful effects on them. Among them some do not look evidently harmful, but they have potentials to ruin stone architecture as time goes on. Since the cultural assets have magnificent meanings as historical aspects, their future states should be considered seriously as well as that of the presence. The past method to get rid of the pollutants from the surface of cultural properties has been changed a lot till the present along with scientific development of technology on this field. Existing method to eliminating pollutants are based on physical and chemical processing, which can make damages on them too. Recently cleansing using LASER has been developed in Europe and proved as effective and relatively less harmful to remove pollutants, and it has been adopted widely. After the success of the way by LASER, there are several trials to adopt the way to our cultural properties which have similar materials. Those showed satisfactory results and studies for developing the securer and more dependable ways to apply. From now on the report will show the effective ways to apply the method using LASER on to the similar materials and different materials as well and discuss about the pros and cons about the method.

알지네이트 인상재의 혼합방법과 트레이 어드헤시브 도포에 따른 모형의 정확도 비교

김진형,정문규,Kim Jin-Hyung,Chung Moon-Kyu 대한치과보철학회 2001 대한치과보철학회지 Vol.39 No.5

The use of alginate impression materials today is prevalent because of its efficiency and simplicity in clinical settings. Unfortunately, the simplicity of the procedure tends to lull the dentist into a sense of well-being, and lead him into using careless or sloppy technique. Alginate impression materials are used to fabricate diagnostic and preliminary casts, and the final cast. Incorrect use of this material is known to affect the accuracy of the final prosthesis. The purpose of this study was to compare the effect of different mixing methods of alginate impression material and tray adhesive on the accuracy of the stone cast produced by each method. A total of 30 stone casts were produced by using 3 different types of mixing methods (10 stone cast for each mixing method, respectively). The first method utilized an automatic-mixing machine to mix alginate while the second method was carried out manually, strictly following manufacturer's instructions. The third method also involved manual mixing, but did not follow the manufacturer's instructions and was done in a random fashion. Also, 20 additional stone casts were produced by using alginate with or without tray adhesives were included in the study to evaluate effects of tray adhesives on the accuracy of alginate impression. 10 stone casts were produced by adding tray adhesives to the interior surface of the impression tray prior to taking the impression. The other 10 excluded this step. A total of 50 stone casts were analyzed by the three-dimensional measuring machine to measure and compare the dimensional changes of the impression material of each group. The results are as follows. 1. No significant difference was found between the automatic mixing group and the manually-mixing group(p>0.05). 2. For the group that followed manufacturer's instructions, less dimensional changes were record ed than the group that didn't in measuring distanced 4(p<0.05). 3. The group that used tray adhesives showed less dimensional changes(p<0.05). The findings revealed that mechanical methods of mixing alginate impression materials had little influence on dimensional changes. However, it is proven that following manufacturers instructions in alginate impression taking is an important step in acquiring accurate impressions and tray adhesives may play an important role in enhancing the results.

The Application of Discrete Time Optimal Control Theory to Natural Resource Problems

김진형,이덕만,Kim, Jin Hyung,Lee, Dug Man 한국환경경제학회 2003 자원·환경경제연구 Vol.12 No.1

본 연구는 이산시간 적정제어이론을 사용하여 동태적 경제 문제의 최적해를 구하기 위해 사용되는 두 가지 형태의 극대원리를 분석하고 있다. 이산시간 적정제어이론에 관한 선행연구들은 상태방정식이 차분방정식의 형태를 띠는 경우에 적용할 수 있는 극대원리를 제안하고 있다. 그러나 본 연구는 상태방정식이 차분방정식이 아닌 일반방정식의 형태를 띠는 경우에 적용할 수 있는 극대원리를 개발하였다. 그리고 본 연구를 통해 개발된 극대원리와 선행연구들이 제안한 극대원리와의 차이는 공동상태 변수의 운동법칙에 있음을 보여주고 있다. 특히 본 연구는 Bellman의 최적원리를 이용하여 본 연구에서 개발된 극대원리는 선행연구들이 제안한 극대원리를 포함하는 일반적인 극대원리임을 설명하고 있다. 마지막으로 본 연구는 목재공급모형인 TSM2000에 포함된 경제변수의 동태적 최적화를 구하는 과정을 통해 본 연구에서 개발된 극대원리가 경제 문제에 적용되는 사례를 보여 주고 있다.

뉴로피드백과 한방치료를 병행한 주의력결핍 과다행동장애 치료 1례

김진형 ( Jin Hyung Kim ),오용렬 ( Yong Leol Oh ),이종화 ( Jong Hwa Lee ),김태헌 ( Tae Heon Kim ),류영수 ( Yeong Soo Lyu ),강형원 ( Hyung Won Kang ) 대한한방신경정신과학회 2006 동의신경정신과학회지 Vol.17 No.3

Attention Deficit Hyperactivity Disorder(ADHD) is a psychiatric disorder, characterized by the primary symptoms of inattention and/or impulsivity and hyperactivity. This study is a clinical report of 1 ADHD child treated with typical Oriental Medical Therapy(Herb-med, acupunture, etc.) in Combination with Neurofeedback. Conner`s parent rating scale, ADHD Diagnostic System were compared between before and after treatment. The results show the typical Oriental Medical Therapy in Combination with Neurofeedback is efficient in the treatment of ADHD.

프로그래밍 교육을 위한 알고리즘 인식

김진형(Jin Hyung Kim),김석원(Seok Won Kim),한선화(Sun Hwa Hahn) 한국정보과학회 1994 정보과학회논문지 Vol.21 No.11

프로그램의 문장패턴에 대한 형판정합(template matching)을 이용한 프로그래밍 플랜 인식은 일반적인 제어구조를 인식하는데에는 좋은 성능을 보인다. 그러나 정렬이나 탐색 등과 같은 알고리즘은 대개 구조가 최적화되어 있어서 작은 단위의 의미있는 플랜으로 나누기 어렵고, 이런 알고리즘을 포함하는 프로그램은 형판정합 방법만으로는 인식하기가 어렵다. 이런 사실에 근거하여 본 논문에서는 플랜인식 방법을 보완한 알고리즘인식 방법을 제안한다. 제안하는 알고리즘인식 방법은 프로그램에 대한 부분적 인식이 가능한 플로우그래프(flow graph) 파싱을 이용한다. 프로그래밍 교육에 있어서 숙제로 부과되는 문제에서 미리 알아낼 수 있는 정보를 활용하여 구현된 알고리즘을 부분적이 아니고 완전히 인식할 수 있도록 방법론을 확장하였다. 목적에 관한 정보는 두 가지 측면에서 활용된다. 첫째, 그래프 변환규칙의 역할을 확대하여 알고리즘에 고유한 정보를 표현하도록 하며, 둘째, 알고리즘 고울을 구현하기 위해 사용된 알고리즘을 알아내기 위해 각 알고리즘 플랜에 고유한 그래프 노드를 찾아낸다. 정렬이 요구되는 C 프로그램에 이 방법론을 적용한 결과 72개의 프로그램중에 55개의 프로그램이 성공적으로 인식되었다. Plan-recognition with template matching shows reasonable performance for recognizing general control structures. However, problems containing a well-defined algorithm such as sorting and searching are difficult to recognize by the template-based methodology alone, because an algorithm is often highly optimized and therefore hard to divide into smaller meaningful units. Based on this observation, we propose an algorithm recognition methodology to augment the plan-recognition approach. Our algorithm recognition approach is based on the flow graph parsing which performs a partial recognition of functions. The methodology is extended to completely understand algorithm implementation by providing the information of the program's goal, a specification of programming assignment in tutoring environment. Utilization of goal information is two-fold; extending the role of transformation rules to represent algorithm-specific information and looking for salient graph parts of algorithm plan to determine which has been used to implement the goal. Preliminary evaluation was performed on 72 programs of C programming language containing sort algorithm, which were submitted by freshmen of C programming language course at KAIST.