http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
오준호(J. Oh),김기용(K. Kim),조용락(Y. Cho),장윤석(Y. Jang),장달식(D. Jang),장준현(J. Jang) 유공압건설기계학회 2009 유공압건설기계학회 학술대회논문집 Vol.2009 No.11
A research on the improvent of working convenience and performance of excavator has been performed by many researchers and manufacturers. Leading companies have researched and applied their electro-controlled pump technology into excavator products early in 2000"s. Concerning the performance of an excavator, moreover, development of high-efficiency excavator system in various working patterns is becoming one of their main interests. In this research we obtained experimental results of an excavator in various working patterns. Also, those results were utilized to analyze energy loss distribution of a working pattern and finally to improve the convenience and performance of an excavator.
김만달(M. D. Kim),권종화(J. H. Kwon),임대국(D. K. Lim),김종영(J. Y. Kim),장준표(J. P. Jang) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
유도무기 생산은 군 전력화 계획에 기초하여 년간 생산 수량을 분배하여 설비, 작업 시간, 투입 인원 등 생산에 필요한 자원들을 적기에 배치할 수 있도록 공정 설계를 진행한다. 유도무기의 수많은 주요 구성품 중 목표물을 포착하고 추적하는 탐색기는 기술 복잡도 및 요구 시험 항목이 많아 생산 공정이 매우 복잡하고 길어 목표한 생산 수량에 주요한 변수가 된다. 군 요구사항으로 생산 수량의 변화가 단 기간에 크게 변동이 발생하는 경우 생산 CAPA 및 작업 인원 배치에 대한 최적안 도출이 필요하다. 본 연구는 공정 설계 전용 상용 프로그램을 도입 적용하여, 현 수준의 생산 CAPA 를 검증하고, 특정 기간에 요구되는 급격한 생산 물량 변화에 대응할 수 있는 방안을 검토하였다. 먼저, 현 생산 설비의 운용 효율성을 검토하고, 생산 수량 증대를 위한 주요 설비 항목을 식별하고, 설비 추가 투자 시 효과를 다양한 형태로 분석하여 최적 방안을 검토하였다. 또한 기 투입된 생산 인원에 대한 작업자 여력을 분석하고 생산 인원에 대한 운용 효율화들 통한 생산성 증대 방안을 제시하였다. 또한 도출된 방안에 대해 생산 부서 합의 및 검증을 실시하였다.
IEC 61970 CIM(Common Information Model) 기반 에너지 관리 시스템 개발
김명희(M.H. Kim),최인선(I.S. Choi),최영준(Y.J. Choi),이창호(C.H. Lee),장준형(J.H. Jang),김태완(T.W. Kim),이승재(S.J. Lee) 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.5
현재 IEC61970 표준 프로토콜을 적용하고 그 목적에 맞게 상호운용성(Interoperability)을 구현하려는 노력이 진행되고 있는 상황이다. CIM (Common Information Model) 표준은 상위 EMS (Energy Management System) 간 데이터 교환을 목적으로 국제적으로 활발한 활동을 진행하고 있다. 이에 따라 본 논문에서는 CIM 기반으로 EMS 시스템을 설계 개발하여 상호운용성을 확보하여 다양한 프로토콜 연계를 통한 시스템 구성의 편리성을 확인할 수 있다.
지능형 굴삭기의 궤적 추종 오차 개선을 위한 중력 보상 제어기에 대한 연구
이창섭(C. S. Lee),홍대희(D. H. Hong),김태호(T. Kim),김기용(K. Kim),조용락(Y. Cho),장윤석(Y. Jang),장달식(D. Jang),장준현(J. Jang) 유공압건설기계학회 2009 유공압건설기계학회 학술대회논문집 Vol.2009 No.11
One of the most important factors in Intelligent Excavator is to locate the bucket fast and accurate to the right position. To locate the bucket accurately, the Arm and the hydraulic cyliner of the Boom should be exactly controlled. But as voltage and the force that should be controlled can be different by the positioning of the excavator, exact controlling is a difficult task. Only if we could control the gravity and the load, which is the main part in controlling the excavator in a slow system, it can be controlled more accurately. In this paper, we looked on how much the excavator could be controlled with gravity compensation.