http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지점부 하부플랜지에 고강도 콘크리트를 합성한 강 박스거더교의 정적 특성 분석
차태권(Cha, Taegweon),장일영(Jang, Ilyoung) 한국방재학회 2021 한국방재학회논문집 Vol.21 No.1
강 박스거더 교량은 비틀림 강성이 크므로 곡선교에 대한 적용성이 우수하며 가설시 세그멘트의 중량이 콘크리트 교량 대비 작아서 중경간 교량에 대한 적용사례가 많다. 그러나 70 m 이상의 장경간 교량 적용시에는 강 박스거더의 지점부 형고가 커지므로 거더 제작 및 운반과 가설시에 불리해진다. 따라서 대블럭의 크레인 가설 등 시공을 용이하게 하기 위해서는 공법 개량이 필요하다. 이에 연속경간 지점부의 하부플랜지에 고강도 콘크리트를 합성하여 상부슬래브와 이중합성되는 박스거더교의 구조계를 제안하고 구조적 성능을 유한요소해석과 실물시험체의 정적재하실험을 통해 비교 검증하였다. 이러한 구조계는 단면효율 최적화로 연속지점부 형고를 최소화하며, 사용성 측면에서도 개선된 구조임을 확인하였다. The steel box girder bridge has excellent applicability to curved bridges owing to its large torsional rigidity. In addition, because the weight of the segments is smaller than that of concrete bridges, it also has many applications for medium-range bridges. However, when a bridge with a span greater than 70 m is constructed, the height of the steel box girder increases, which is disadvantageous for the manufacture and transportation of girders and for bridge construction. Therefore, improvements in the construction methods are required to facilitate construction. Therefore, a structural system of a double composite box girder bridge with an upper slab and composite high-strength concrete at the lower flange of the support of continuous span was proposed, and the structural performance was verified by finite element analysis and a static loading test of an actual specimen. It was confirmed that such a structure minimizes the height of the girder of continuous support by optimizing the sectional efficiency and also improves usability.
고속도로 건설 시 성토부 다짐관리를 위한 LFWD의 활용성
박양흠(Yangheum Park),장일영(Ilyoung Jang),도종남(Jongnam Do) 한국지반환경공학회 2021 한국지반환경공학회논문집 Vol.22 No.3
고속도로 토공에서 대부분을 차지하는 성토부의 다짐도 평가는 일반적으로 평판재하시험에 의해 이루어진다. 평판재하시험은 전통적인 시험법으로 높은 신뢰성을 가지고 있지만, 반력장비를 공수해야 하고, 시험 시 개소당 약 40분의 시간이 소요됨에 따라 광활한 토공부 전체를 관리하기에는 한계가 발생할 수 있다. 한편, 국토해양부에서는 이를 극복하고자 2010년에 ‘포장 하부구조 다짐관리 잠정지침’에서 간편한 다짐도 평가방법 기준을 제시한 바 있다. 하지만 10년이 지난 지금까지 고속도로공사 현장에서는 활용하고 있지 못하고 있다. 따라서, 본 연구에서는 잠정지침에서 제시한 시험법 중 충격재하 방식의 LFWD(Light Falling Weight Deflectometer)를 활용한 다짐도 평가방법에 대한 활용성을 검증하고자 하였다. 이를 위하여 현장 토질 성상 및 다짐도별로 평판재하시험 및 LFWD시험을 실시하여 상관관계를 도출하였다. 시험결과, 80% 이하의 상대 다짐도를 가진 지반에서는 시험데이타의 일관성이 없었으나, 그 이상에서 상관도가 증가하는 경향을 가지는 것을 확인할 수 있었다. 향후 충격재하 방식의 시험값의 일관성 확보를 위하여 본 연구 결과를 참고하여 시험방법 또는 시험장비를 개선한다면 토공부 다짐도 관리 사각지대를 해소하는 데에 큰 역할을 할 수 있을 것으로 기대한다. The evaluation of the degree of compaction of the embankment area, which accounts for most of highway earthworks, is generally performed by a flat plate loading test. The plate loading test is a traditional test method and has high reliability in the field. However, as reaction force equipment must be carried out and it takes about 40 minutes per site during the test, there may be limitations in managing the entire expanse of earthworks. Meanwhile, in order to overcome this, the Ministry of Land, Infrastructure and Transport proposed a simple method of evaluating the level of compactness in the provisional guidelines for compaction management of the packaging infrastructure in 2010. However, it has not been utilized at the highway construction site until now, 10 years later. Therefore, this study attempted to verify the utility of the compaction evaluation method using LFWD (Light Falling Weight Deflectometer) of the impact loading method among the test methods suggested in the provisional guideline. To this end, the correlation was derived by conducting a plate loading test and an LFWD test for each site property and compaction degree. As a result of the test, there was no consistency of test data in the ground with a relative compaction of 80% or less. However, it was confirmed that the correlation has a tendency to increase beyond that. If the test method or test equipment is improved to ensure the consistency of the test values of the impact loading method in the future, it will play a big role in solving the blind spot for compaction management in the earthworks.