http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Al<sub>2</sub>O<sub>3</sub>/CNTs 하이브리드소재의 와이어 방전연삭을 이용한 마이크로 방전가공 특성
탁현석,김종훈,임한석,이춘태,정영근,강명창,Tak, Hyun-Seok,Kim, Jong-Hun,Lim, Han-Suk,Lee, Choon-Tae,Jeong, Young-Keun,Kang, Myung-Chang 한국분말야금학회 2010 한국분말재료학회지 (KPMI) Vol.17 No.4
Electrical discharge machining (EDM) is an attractive machining technique but it requires electrically conductive ceramic materials. In this study, Alumina matrix composites reinforced with CNTs were fabricated through CNT purification, mixing, compaction and spark plasma sintering (SPS) processes. $Al_2O_3$ nanocomposites with the different CNT concentrations were synthesized. The mechanical and electrical characteristics of $Al_2O_3$/CNTs composites were examined in order to apply the materials to the EDM process. In addition, micro-EDM using wire electrical discharge grinding (WEDG) was conducted under the various EDM parameters to investigate the machining characteristics of machined hole by Field Emission Scanning Electron Microscope (FE-SEM). The results show that $Al_2O_3$/CNTs 10%Vol. was more suitable than the other materials because high conductivity and large discharge energy caused violent sparks resulting in bad machining accuracy and surface quality.
김선호(Sun-Ho Kim),임한석(Han-Seok Lim) 한국기계가공학회 2011 한국기계가공학회지 Vol.10 No.1
Micromachining is gaining popularity due to recent advancements in MEMS(Micro Electro Mechanical Systems). Using conventional micromachining, it is relatively difficult to produce moving components in the order of microns. Photolithography for silicon material has high accuracy machining, but it has low aspect ratio. X-ray lithography has ultra high accuracy machining, but it has expensive cost. Micro-EDM(electro discharge machining) has been gaining popularity as a new alternative method to fabricate micro-structures. In this study, Micro-EDM machine is developed available for fabricate micro-structures and two processes such as side cut EDM and milling EDM is proposed. Several sets of experiment results have been performed to study the characteristics of the machining process.
허광희 ( Heo Gwang-hee ),전승곤 ( Jeon Seung-gon ),임한석 ( Lim Han-seok ),이재훈 ( Lee Jae-hoon ),서상구 ( Seo Sang-gu ) 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
다세대가 생활하는 아파트와 같은 공동주택의 경우 단독주택과는 다르게 화재가 발생하였을 때 신속한 대피가 어려워 인명피해로 이어지는 경우가 많다. 이러한 문제로 피난기구가 설치된 별도의 대피공간을 의무적으로 설치하도록 규정하면서 대피공간 확보에 대한 중요성이 높아지고 있다. 그러나 일부 주거자들은 화재에 대한 불감증으로 인하여 평상시 대피공간에 불필요한 물건을 적치하면서 창고처럼 사용되고 있다. 이로 인하여 화재발생 시 즉각적으로 사용하여야 하는 대피공간이 제 역할을 하지 못하게 되고, 이는 대형 참사로 이어질 가능성이 높다. 따라서 본 연구에서는 화재로부터 즉각적인 피난이 가능하도록 대피공간 내의 적치물을 상시 감지할 수 있는 적치물 감지센서등을 개발하였으며, 실험을 통하여 개발된 적치물 감지센서등의 성능을 검증하였다.
튜브내 고압수소의 파열 순간 가시화를 통한 자발점화 현상 연구
이형진(Hyoung Jin Lee),박지현(Ji Hyun Park),이상윤(Sang Yoon Lee),임한석(Han Seok Lim),정인석(In-Seuck Jeung) 한국연소학회 2013 KOSCOSYMPOSIUM논문집 Vol.2013 No.12
수소는 차세대 친환경 에너지원으로 고압용기에 충전방식의 사용이 고려되고 있다. 이러한 고압수소는 용기의 파손에 따른 자발점화 현상들이 관찰되었으며 이러한 자발점화 발생 원인대 대한 연구들로 튜브 내 수소를 누출시키면서 점화 가능한 형상에 대한 실험적 연구와 수치해석들이 수행되어 왔다. 본 논문에서는 고압수소가 튜브내에서 차단 격막의 파단으로 급격히 분출되도록 하여 충격파 후단에 발생되는 점화현상에 대해 압력을 측정하고 유동가시화를 통하여 점화발생 현상과 화염 전파형태에 대한 실험결과를 기술하였다. 특히 격막이 파열되는 순간을 가시화를 통해 격막 파열 초기 유동 가시화 및 자발 점화 현상에 대한 분석을 수행하였다.