http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
125MWe 대향류식 우드펠릿 보일러의 미연탄소 저감을 위한 CFD 해석 연구
이지석(Jiseok Lee),유승한(Seunghan Yu),류창국(Changkook Ryu) 한국열환경공학회 2019 한국열환경공학회 학술대회지 Vol.2019 No.춘계
이 연구는 무연탄에서 우드펠릿 전용 보일러로 개조된 125MW 규모 대향류 보일러에서의 운전 개선을 위해 수행한 연구이다. 우드펠릿은 목분을 압축 성형한 연료로서, 미분을 통해 연소 시 분쇄성이 낮아 큰 입경의 입자들이 높은 미연탄소 함량을 가지고 바닥재로 배출되어 보일러 효율을 감소시키는 등의 운전상의 문제를 유발한다. 따라서 이를 개선하기 위해 CFD를 이용하여 연료입경별 거동과 연소공기 배분 등에 따른 미연탄소 발생 및 NOx, 보일러 효율 영향을 상세 분석하였다. 대상보일러는 downshot 방식의 형태를 유지하며 대향류 방식으로 개조되었기 때문에 버너영역의 폭이 넓어 유속저하로 바닥재 배출이 증가하는 경향을 보인다. 특히 1 mm 이상의 입자에서 높은 미연탄소 함량을 가지고 바닥재로 배출되는 비율이 크게 늘어나는 것으로 나타났다. 따라서, 1 mm 이하로 미분도 개선 시 NOx 영향 없이 연소 효율 향상이 가능하였으나, 이는 미분기 교체가 필요하여 현실적으로 쉽지 않은 방안이다. 그 대안으로서 연소공기 배분을 다양하게 변경하는 방식을 분석한 결과, 하단 버너로의 공기 공급을 증가시키는 경우 소폭의 개선이 가능함을 확인하였다. 보다 근본적인 개선방안은 추가적인 보일러 개조를 통해 underfire air를 설치하고 overfire air의 포트 위치를 수정하는 것이다. 이 경우 air staging을 확실하게 적용할 수 있어 미연탄소 배출과 NOx 배출을 획기적으로 저감하는 것이 가능한 것으로 나타나 적용방안의 검토가 필요하다.
120MWe 우드펠릿 보일러의 공기배분에 따른 NOx 및 미연탄소 저감 특성의 CFD 해석 연구
이지석(Jiseok Lee),유승한(Seunghan Yu),류창국(Changkook Ryu) 한국연소학회 2019 KOSCOSYMPOSIUM논문집 Vol.2019 No.5
Pulverized wood pellet used for power generation in a boiler generally has larger particle sizes and heavier weight than those of pulverized coal due to its low grindability. Increasinag flow rate of overfire air(OFA) to have lower NOx concentration leads to decreased carbon conversion. This study aims to reduce NOx and unburned carbon by adjusting air distribution, although the total amount of air injected is the same. The results showed that properly changing the flow rate of OFA makes inverse trend between the concentration of NOx and the unburned carbon in ash. However, injecting too much OFA had too much unburned carbon. As the flow rate of lower burners increases, the unburned carbon in ash has decreased significantly, supplementing the difficulty of OFA flow rate adjustment alone.
595㎿e급 대향류 석탄화력 보일러의 공기다단공급에 따른 연소 및 NOx 발생 특성 해석
이지석(Jiseok Lee),조현빈(Hyunbin Jo),류창국(Changkook Ryu),장계환(Kyehwan Jang) 한국연소학회 2019 KOSCOSYMPOSIUM논문집 Vol.2019 No.11
This study analyzed the characteristics of combustion and NOx emission in an opposed wall-firing boiler at a 595 MWe capacity. Computational fluid dynamics (CFD) simulations incorporating advanced coal combustion models were performed for the stoichiometric ratio (SR) of the burner zone varying between 0.84 and 0.94 while fixing the total SR at 1.15. For the reference case, the CFD results showed reasonable agreement in terms of heat distribution and NOx emission with the design data. The NOx emission at the furnace exit was reduced by about 8% when the burenr zone SR was reduced to 0.84. However, the unburned carbon in the bottom ash and fly ash were increased by two and three times, respectively, which is not favorable for the boiler efficiency. In contrast, the NOx emission was increased by 11% when the burner zone SR was increased to 0.94, but the unburned carbon in bottom and fly ash were decreased by 50% and 17%, respectively. Based on the analysis of detail flow pattern and char particle behaviors, the design and operation of the burner zone and over fire air can be improved in the future development to achieve low NOx emission and unburned carbon release at the same time.
섬유 B2B 활성화를 위한 ERP 시스템 도입방안 - 대구ㆍ경북지역 섬유산업을 중심으로 -
이지석(Jiseok Lee) 한국인터넷전자상거래학회 2004 인터넷전자상거래연구 Vol.4 No.3
The ERP system gives advantage in competition to enterprises by enabling the sharing of enterprise activity information through an integrated resource management system of product, resources, sales and human affairs. In this study, I tried to search and analyze the introducing procedure of ERP System from the introduction step to the management step with examples of system that were built by an ERP package and an efficient construction method of ERP system is suggested. I proposed the web-based ERP system(Fiber B2BㆍERP) which is accrued by new earning model creation contacted with other internet technology and a variety of information system to develop information system standardization activity of the small-sized enterprises, the fiber companies in the Daegu-Gyeongbuk area.
Predicting Cultural Values in Islamic Countries: The Six Cultural Dimensions of Hofstede’s Model
Jiseok Lee(이지석),Hongyan Zhao(조홍연),Jihyun Heo(허지현),Cui Long(최룡),Jongwook Kwon(권종욱) 연세대학교 경영연구소 2020 연세경영연구 Vol.57 No.1
본 연구의 목적은 홉스테드의 문화 모형에 포함되지 않은 57개 이슬람 국가의 문화적 가치 점수를 추정하는 것이다. 홉스테드는 현재까지 수행된 문화가치관에 연구 중에서 가장 많이 인용되고 있으며 가장 포괄적인 연구 중 하나로 간주되고 있다. 초기에는 40개 국가를 대상으로 조사하였으나 현재 100개 이상의 국가의 가치관 점수를 발표하고 있다. 이렇게 포괄적인 연구임에도 불구하고 놀랍게도 소수의 이슬람 국가를 포함하고 있다. 따라서 본 연구는 57개 이슬람 국가를 대상으로 홉스테드 모형의 6가지 문화차원별 가치관 점수를 분석한 첫 번째 연구라 할 수 있다. 분석 결과, 이슬람 국가들은 모두 높은 집단주의 경향과 큰 권력거리 차원에 밀집해 있다는 것을 보여주었다. 불확실성 회피와 남성성 차원에 대해서는 이슬람 국가들은 대부분 중간 점수에 몰려있었다. 이 두 가지 문화차원에 대해서 대부분의 이슬람 국가들은 동질적인 문화를 가지고 있다는 의미이다. 이슬람 국가들은 대부분 절제되고 단기지향적인 경향을 보였다. 또한 흥미로운 점은 보통 이슬람 국가들은 동질적인 문화를 가지고 있다고 생각하지만 본 연구에서는 이슬람 국가들 간의 문화차이가 이슬람국가와 비이슬람국가 간의 문화차이보다 더 큰 것을 발견하였다. 이러한 연구결과는 이슬람 국가진출 다국적기업에게도 시사점을 제공한다. 이슬람 진출 다국적기업은 이슬람을 하나의 동질적인 문화로 간주하여 표준화 전략을 수립하기 보다는 문화에 적합한 차별화된 경영관행의 수립이 필요함을 보여주고 있다. 예를 들면 개인주의 문화차원에서 개인주의가 강한 문화에서는 개인의 성과를 강조하는 경영관행이 강조되어야 하지만 집단주의 성향이 강한 국가에서는 집단의 조화를 고려하는 관행의 설계가 필요하다. The aim of this paper is to estimate and analyse the cultural value scores of the 57 Islamic countries that were not included in Hofstede’s model. Hofstede conducted one of the most comprehensive studies about how values in the workplace are influenced by culture. His data covered more than 100 countries, and the study included the largest group of respondents of any cross-cultural value survey at the time. Given its popularity and the large number of countries encompassed, Hofstede’s model includes surprisingly few Islamic countries. To the best of our knowledge, the present study is the first to analyse the cultural value scores of the 57 Islamic countries. The results reveal that the Islamic countries are all densely clustered in the collectivist and large power distance dimensions. Regarding the uncertainty avoidance and masculinity dimensions, the Islamic countries mostly have medium scores and are intensively clustered. Islamic countries are mostly clustered in the restrained and short-term orientation dimensions. The finding that the cultural distance among Islamic countries is much greater than that between Islamic countries and non-Islamic countries is interesting. We also summarized some implications of the characteristics of the cultural values of Islamic countries. Multinational corporations must seriously consider adjusting their management practice approaches to align with Islamic culture to maximize performance.
이지석(Lee Jiseok),강필순(Kang Pil-Soon) 한국산학기술학회 2014 한국산학기술학회 학술대회 Vol.- No.-
본 논문에서는 산업 생산현장에서 작업자의 신체에 유해한 작업동작을 분석하여 인체의 근골격계질환을 예방할 수 있는 신체 부분착용식 외골격로봇을 이용한 근력보조의 방법을 제시한다. 부분착용식 외골격로봇이 전신형 착용로봇의 안정성 및 착용성의 제약성을 보완하고 신체에 무리하게 가해지는 근육의 부하를 절감할 수 있도록 작업을 지원하고 자연스러운 보행동작으로 편의성을 제공할 수 있는 메커니즘 설계와 제어방법을 연구하였다.