http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이용범(Y. B. Lee),이기천(G. C. Lee),이종직(J. J. Lee) 유공압건설기계학회 2018 유공압건설기계학회 학술대회논문집 Vol.2018 No.6
Torque and revolutions are measured by using a rotary torque meter to measure the performance of hydraulic pumps and motors. It is only necessary to ensure the accuracy of the torque meter in order to check whether the measured performance of the products to be measured is improved or not. However, the measurement error of the same product is large due to noise, and it can be happen that the efficiency may exceed 100 %. Based on analyzing the characteristics of static torque calibration problems and line & system noise problems, this study analyzed the torque measured data after filtering by software filter adopted with cut-off type noise filter and hardware filter adopted with low & high frequency band noise filter for securing the high precision torque measured data. A new concept of a digital pulse transmission type torque meter was developed and tested in order to overcome the limitation of voltage transmission method of the conventional transformer type.
선박용 보조기기 니트릴-부타디엔 고무 씰의 상태 기반 고장 진단을 위한 데이터베이스 및 상태 진단 알고리즘 개발에 관한 연구
이송호(S. H. Lee),김정영(J. Y. Kim),이종직(J. J. Lee),김용진(Y. J. Kim),이태현(T. H. Lee) Korean Society for Precision Engineering 2021 한국정밀공학회 학술발표대회 논문집 Vol.2021 No.11월
유청정기(Purifier)는 원심분리 형태로 원유를 정유와 물, 슬러지(Sludge)로 분리하는 장비로, NBR 씰은 유청정기 내부에 위치하여 기기 작동 중 외부의 오염물을 막고 압력 및 유량을 유지하는 역할을 한다. 씰이 열 노화될 경우, 씰의 신장률이 감소하고 제 역할을 수행하지 못하여 장비 고장으로 이어질 수 있다. 이에 본 논문에서는 NBR 씰의 열 노화에 따른 상태 진단을 위한 데이터베이스 구축과 진단 알고리즘 개발에 대한 연구 결과를 소개하고자 한다. 먼저 씰의 해당 고장모드의 판별 기준을 신장률로 설정하고, 아레니우스 방정식을 활용해 가속 환경 조건을 도출하여 씰 노화를 진행하였다. 이후 인장시험으로 인장특성의 저하를 확인한 후, 장비에 장착 및 가동하여 5 종의 고장모사 진단데이터를 취득하였다. 해당 고장에 대한 장비 성능 열화는 온도와 압력, 유량데이터를 이용한 지식 기반 방법을 통해 직접적으로 확인하였으며, 소음 및 진동 데이터를 활용한 데이터 기반 방법을 적용해 상태 진단의 효율 향상을 위한 진단 데이터 특성을 추출하였다. 데이터 분석 시 FFT (Fast Fourier Transform)와 STFT (Short Time Fourier Transform), 그리고 웨이블릿(Wavelet) 변환의 신호처리 기법을 활용하였으며, 혼동 행렬(Confusion Matrix)로 각 방법의 분류 성능을 확인하여 개발된 방법의 적절성을 평가하였다. 본 연구는 향후 자율운항선박 보조기기의 상태 기반 정비뿐만 아니라 고장예지 연구에도 활용할 수 있을 것으로 기대된다.
발전소용 스팀제어밸브와 유압서보액추에이터의 고장원인분석 및 개선에 관한 연구
이용범(Y. B. Lee),이기천(G. C. Lee),박종원(J. W. Park),김태석(T. S. KIM),이종직(J. J. LEE),양종대(J. D. Yang) 유공압건설기계학회 2019 유공압건설기계학회 학술대회논문집 Vol.2019 No.6
In nuclear and thermal power plants, turbine output control, a special steam valve that is opened with a hydraulic servo actuator and closed with a large steel spring, is used in high pressure and low pressure steam turbines. This steam control valve should supply an adequate amount of steam during normal power generation operation, but should protect the turbine rotating at high speed (Nuclear power plant 1800 rpm, thermal power plant 3600 rpm) by cutting off the steam supply quickly when an error occurs in the power generation system. This study analyzes the failure of the steam valve in the turbine output control system and the failure of the hydraulic servo actuator that operates the steam valve, and summarizes the results of the improvement.