http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고유벡터의 변화량에 의한 비례감쇠구조물의 변경질량 및 그 위치 해석
이정윤,Lee, Jung-Youn 한국생산제조학회 2010 한국생산제조학회지 Vol.26 No.2
In spite of a large amount of previous research, detail study on modified mass in proportional damping system is not well understood. It is common to predict structural dynamic design parameters due to the change of mass, but to predict the amount of modified mass and the location where the mass is being modified are rarely found in previous literature. Such inverse problem required detail analytical study in order to understand structural modification in proportional damping system. This paper predicts the modified mass and the modified mass location in proportional damping system using sensitivity coefficients and iterative method. The sensitivity coefficients are obtained from the change of eigenvectors due to mass modification. This method is applied to a horizontal beam and three degree of freedoms system. To validate the predicted changing mass and its location, the obtained results are compared to the reanalysis result which shows good agreement.
동특성 변화를 이용하여 비례감쇠 구조물의 변경된 설계파라미터 예측
이정윤(Jung Youn Lee) 대한기계학회 2010 大韓機械學會論文集A Vol.34 No.7
일반적으로 설계파라미터 변경에 의한 구조물의 동특성변화를 예측하는 연구에 비해 동특성 변화로부터 변경된 설계파라미터를 예측하는 연구는 잘 알려져 있지 않다. 여기에서는 감도계수와 반복법을 사용하여 비례감쇠계의 변경된 설계파라미터를 예측하였다. 감도계수는 변경에 의한 고유벡터의 변화로 부터 구하였다. 이 방법을 3층 전단 구조물에 적용하여 변경된 설계 파라미터를 예측하였으며 재 해석한 결과와 잘 일치함을 알았다. It is common to predict structural dynamic design parameters due to the change of design parameter, but to predict the amount of changed design parameter where the mass and stiffness are being modified are rarely found in previous literature. In this study, the changed design parameter in a proportional damping system is predicted by using sensitivity coefficients and an iterative method. The sensitivity coefficients are determined from the changes in eigenvectors; these changes are due to modification. This method is applied to a three-story shear structure. To validate the prediction of the changed design parameter, the results are compared to the reanalysis results; both results are in good agreement.
설계 변수 변경에 따른 트러스 구조물의 동특성 변화 예측
이정윤(Jung Youn Lee) 대한기계학회 2020 大韓機械學會論文集A Vol.44 No.5
이 연구에서는 변경 질량 및 강성의 크기와 위치를 이용하여 트러스의 동특성 변화를 예측하였다. 이를 위해 반복법을 사용하여 설계 변경량의 비선형 함수인 감도 계수를 구하였다. 이 감도 계수를 이용하여 변경된 트러스의 고유 진동수와 고유 벡터를 변경 전 고유 진동수, 고유 벡터와 질량 및 강성변화만으로 정확히 예측하는 방안을 제시하였다. 이를 검증하기 위해 7bar 트러스에 적용하여 설계 변경 후 고유 진동수와 고유 벡터를 예측한 결과 설계 변경 후 재해석한 결과들과 잘 일치하였다. In this study, the change in dynamic characteristics of the truss with the modified design was predicted using the magnitude and location of the modified mass and stiffness. For this purpose, the iteration method was used to find the sensitivity coefficient which is a nonlinear function of the design change. Using this sensitivity coefficient, we propose a method to accurately predict the eigenvalues and eigenvectors of the modified truss using only the eigenvalues, eigenvectors before modification, mass and stiffness changes. To verify this, we applied the 7 bar truss to predict the eigenvalue and eigenvector after the design change, and the results were in good agreement with the results re-analysis after the design change.