http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이승홍,권장렬,이억수,Lee, S.H.,Kweon, J.Y.,Lee, E.S. 대한설비공학회 1991 설비공학 논문집 Vol.3 No.4
Laminar film condensation of a saturated vapor in forced flow over a flat plate is analyzed by using integral method. Laminar condensate film is so thin that the inertia and thermal convection terms in liquid flow can be neglected. Approximate solutions for water are presented and well agreed with the similarity solutions over the wide range of physical parameter, Cp1(Ts-Tw)/Pr.hfg. For the strong condensation case, it is found that magnitude of the interfacial shear stress at the liquid-vapor interphase boundary is approximately equal to the momentum transferred by condensation, i.e., ${\tau}_i{\simeq}\dot{m}(U_O-U_i)$.
이필종,이승홍,최호 釜山大學校生産技術硏究所 1999 生産技術硏究所論文集 Vol.57 No.-
열간 압연과정에서 회전률에 충돌하는 스프레이 제트분사에 의한 열전단계수를, 3가지 크기의 평면 형태의 노즐을 사용하여 실험실의 다양한 실험 조건하에서 측정하였다. 열전달 계수는 유한 차분법에 의해 계산되었고, 그 결과들은 다른 실험결과들과 잘 일치하였다. 실험조건에서 냉각환경과 장치의 배열이 롤의 온도에 미치는 영향을 연구하였다. 분사된 영역에서 평균 열전달계수는 12에서 24 kW/m²K 범위이고, 분사압력의 0.4승에 비례한다. 열간압연 과정의 시뮬레이션 결과는 롤바이트 구에서 냉각 능력이 더욱 효과적임을 보여준다. The heat transfer coefficients on a rotating roll have been evaluated under various experimental, hot rolling conditions in the laboratory with 3 different sizes of flat type nozzles for impinging spray jets. The heat transfer coefficients were calculated by FDM and were in good accordance with other experinments. The effects of cooling conditions and configurations of spray device on the roll temperature have been investigated. The average heat transfer coefficients on the sprayed area are between 12 and 24 kW/㎡K, and proportional to the 0.4 power of the spraying pressure. The results of simulation for hot rolling process show that the enhancement of cooling capacity near the roll bite exit is most efficient.