http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
고속 전단 가공에 의한 PC/ABS 블렌드의 열적 물성 변화 연구
이형일(Hyeong Ll Lee),이한기(Han Ki Lee),김대식(Dea Sik Kim),최석진(Seok Jin Choi),김선홍(Seong Hong Kim),유재정(Jea Jung Yoo),용다경(Da Kyong Yong),이승구(Seung Goo Lee),이기윤(Kee Yoon Lee) 한국고분자학회 2014 폴리머 Vol.38 No.3
본 연구에서는 polycarbonate(PC)/acrylonitrile-butadiene-styrene(ABS) 블렌드의 고속 전단 가공 조건하에서의열적 물성 변화에 대해 연구하였다. 고전단 압출 성형기(NHSS2-28)를 이용하여 공정조건인 스크류 회전속도와 전단 부하 시간을 변화시키면서 가공하였다. 고전단 부하 실험 후에 유리전이온도(Tg) 변화를 조사하여, 전단 부하 조건에 따라 약 143 oC에서 약 133 oC로 감소하는 경향을 관찰하였다. 열 중량 분석(TGA)을 통해 열분해 현상을 관찰하여 전단을 가하지 않은 경우 ABS와 PC의 분해곡선이 뚜렷한 두 단계로 나타났으나, 고속 전단 가공을 한 경우분해하는 경향이 일직선상으로 변화되어 나타났다. 이에 대한 물성변화의 원인을 조사하기 위해 주사전자현미경(SEM)으로 관찰하여 분산상의 크기 또한 감소함을 확인하였고, 만능 재료 시험기(UTM)를 이용하여 신율이 고속전단 가공을 한 경우, 소폭 감소하다가 특정 조건 이상에서는 급격한 감소를 보임을 관찰하였다. 결론적으로 적정한고속 전단 응력 조건 이하에서는 PC/ABS 블렌드의 유리전이온도가 수렴하고, 적정 조건 이상에서는 유리전이온도가 급감하므로 전단응력에 의해 열화되는 것을 확인하였다. The effects of high shear rate processing on the thermal properties of PC/ABS blends were studied. It was executedby the high shear processing machine (NHSS2-28) at the varied conditions of screw speeds and loaded duration. After the samples were processed with NHSS2-28, the Tgs were shifted from 143 to 133 oC, and the behavior of degradationdetermined by TGA showed two distinct steps before high shear rate processing, while it showed a straight lineafter the processing. In order to provide the reasons of the properties, it was showen by SEM and UTM that the dropletsizes morphologically decreased after the processing, and the elongations decreased slightly until 1000 rpm of screwspeed and then sharply decreased, according to the conditions of high shear rate processing. Therefore, it can be confirmedthat Tg,s of PC/ABS blends were considerably shifted under an appropriate high shear rate condition, and rapidlydropped, so that blends degraded above the condition, due to stress-induced degradation.
고등학생의 진로검사 · 직업체험에 대한 취업목표, 취업준비행동 및 직무만족도의 인과관계 구조모형 검증
이승구(Lee Sung Goo),오성욱(Oh Seong Uk) 한국진로교육학회 2015 진로교육연구 Vol.28 No.2
본 연구는 한국고용정보원에서 실시한 ‘2013 고졸자취업진로조사(HSGES)’ 데이터를 활용하여 대학 비진학 고졸자 5,149명을 대상으로 고등학교 재학 당시에 학교 및 가정에서 실시한 진로검사(직업적성검사, 흥미검사)와 직업체험 만족도가 학생들의 취업목표 인식도와 취업준비행동 및 취업한 이후에 직장에서의 직무만족도에 미치는 영향에 대해 구조방정식 모델을 활용하여 AMOS(21.0) 프로그램으로 분석하였다. 연구결과를 요약하면 다음과 같다. 첫째, 고등학교 재학 중에 실시한 진로검사의 만족도가 높으면, 취업목표 인식도가 높아지고 취업준비행동에 긍정적인 영향을 미치는 것으로 나타났다. 둘째, 고등학교 재학 중에 실시한 직업체험의 만족도가 높으면, 취업목표 인식도가 높아지고 취업준비행동에 긍정적인 영향을 미치는 것으로 나타났다. 셋째, 고등학교 재학 중에 취업목표 인식도가 높을수록 고등학교 졸업 후 취업한 직장에서 외적직무만족도와 내적직무만족도에 긍정적인 영향을 미치는 것으로 나타났으며, 취업목표 인식도가 높을수록 외적직무만족도보다는 내적직무만족도에 더 큰 영향을 미치는 것을 확인하였다. 넷째, 고등학교 재학 중에 취업준비행동이 많을수록 졸업 후 직장에서의 외적직무만족도와 내적직무만족도에 긍정적인 영향을 미치며, 취업준비행동이 많을수록 외적직무만족도보다는 내적직무만족도에 더 큰 영향을 주는 것으로 나타났다. 마지막으로 상용근로자와 기타근로자를 두 집단으로 구분하여 표본의 특성을 비교한 결과, 상용근로자 집단이 기타근로자 집단에 비해 진로검사 및 직업체험 만족도, 취업목표(업무에 대한 사전인지도 제외), 취업준비행동, 내적직무만족도, 외적직무만족도에서 평균적으로 높게 나타났으며, 통계적으로 유의미한 차이를 보였다. This study analyzed four areas and total 21 questions, career guidance programs, Job goal Perception Level, Employment preparation behavior, and job satisfaction, out of the survey and data from the HSGES(High School Graduates Occupational Mobility Survey) Panel Research conducted by Korea Employment Information Service to 5,149 students graduating from specialized high schools, Meister high schools, and comprehensive high schools(industrial) in February, 2013 but not entering Collage with AMOS Program based on the structural equation model. The findings of this study can be summed up as blow: First, if satisfaction with Job guidance programs(vocational aptitude & interest test) is higher at home and school, it exerts positive effects on Job goal Perception Level and Employment preparation behavior. Second, if satisfaction with Career guidance programs (Korea JobWorld Job experience) is higher at home and school, it exerts positive effects on Job goal Perception Level and Employment preparation behavior. Third, if recognition on Job goal Perception Level is higher, it exerts positive effects on both external and internal job satisfaction at work after graduation, and particularly, if ‘Job goal Perception Level’ is higher, ‘internal job satisfaction’ is influenced more than ‘external job satisfaction’. Fourth, if there is more Employment preparation behavior, it exerts positive effects on both external and internal job satisfaction at work after graduation, and particularly, if there is more Employment preparation behavior, ‘internal job satisfaction’ is influenced more than ‘external job satisfaction’. Lastly, according to the results of comparing the characteristics of samples by dividing them into regular employees and the rest, in career guidance programs, Job goal Perception Level(except for prior recognition on work), Employment preparation behavior, internal job satisfaction, and external job satisfaction, regular employees indicated a higher average than the rest, which showed statistically significant difference.
플라즈마 표면처리에 의한 Silk/PLA 바이오복합재료의 계면접착
추보영,권미연,이승구,조동환,박원호,한성옥,Chu, Bo Young,Kwon, Mi Yeon,Lee, Seung Goo,Cho, Donghwan,Park, Won Ho,Han, Seong Ok 한국접착및계면학회 2004 접착 및 계면 Vol.5 No.4
견섬유와 폴리라틱산(PLA) 사이의 계면접착 특성을 향상시키기 위하여 천연섬유 표면을 아르곤과 에틸렌 플라즈마로 각각 처리하였다. 플라즈마 표면처리 후, 견섬유의 표면 모폴로지와 접착이 크게 변화하였다. 다음의 여러 플라즈마 처리조건이 본 연구에 사용되었다: 10, 25, 50 그리고 150 W의 전력, 1, 3, 5, 7 그리고 10분의 처리시간 및 10과 50 sccm의 가스흐름속도, 플라즈마 처리된 Silk/PLA 바이오복합재료의 계면전단강도는 단섬유 micro-droplet debonding 시험방법으로 측정하였다. 결과는 Silk/PLA 바이오복합재료의 계면접착을 향상시키기 위한 최적의 플라즈마 처리 조건을 제공하여 주었다. Silk fibers were subjected to argon and ethylene plasma treatments in order to improve the interfacial adhesion with polylactic acid (PLA). After the plasma surface treatment, the surface morphology and surface adhesion of silk fibers to the PLA resin were largely changed. Various plasma treatment conditions were used in this work: 10, 25, 50, 100 and 150 W of electric power, 1, 3, 5, 7 and 10 minutes of treatment time, and 10 and 50 sccm of a gas flow rate. The interfacial shear strength of plasma-treated Silk/PLA biocomposites was measured by a single fiber micro-droplet debonding test method. The result provided an optimal plasma treatment condition to obtain the improved interfacial adhesion in the Silk/PLA biocomposites.
유용,한성옥,조동환,이승구,박원호,You, Young,Han, Seong-Ok,Cho, Dong-Hwan,Lee, Seung-Goo,Park, Won-Ho 한국섬유공학회 2004 한국섬유공학회지 Vol.41 No.3
Flax fabrics composed mainly of cellulose were subjected to heterogeneous acetylation after four different pretreatments. The progress of the chemical modification (acetylation) was assessed by ATR-IR. When flax fabrics were pretreated with alkaline solution for 1 h, natural twists of flax fiber disappeared with the change in cross-section to round shape, and its tensile strength decreased up to 50%. Acetylation rate of alkaine-treated flax fabrics treated with glacial acetic acid (Method I) was faster than that of fabrics without glacial acetic acid (Method II). In Method III and IV, alkali treating times were varied from 0 to 30 min to reduce the decrease in tensile strength of flax fabrics without subsequent acetic acid treatment. Acetylation reaction of flax did not occur without alkaline treatment (Method III). In the case of the alkaline treatment for 1 min, the acetylated flax fabrics showed similar tensile strength value to original flax fibers (Method IV).