http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
MWNT가 첨가된 유리/에폭시 평직 복합재료로 이루어진 다층형 전자파 흡수 구조체의 제작 및 설계
이상의(Sang-Eui Lee),강지호(Ji-Ho Kang),김천곤(Chun-Gon Kim) 한국항공우주학회 2005 韓國航空宇宙學會誌 Vol.33 No.11
본 연구의 목표는 X-band에서 하중지지가 가능한 전자파 흡수 구조(RAS)를 제작하는 것이다. 본 연구에서는 하중을 지지할 수 있도록 비강성ㆍ비강도가 우수한 유리섬유/에폭시 평직 복합재료에 손실을 일으킬 수 있는 MWNT를 첨가한 재료를 제작하였으며, 미세 구조의 관찰과 유전율 측정을 통해 흡수 재료로의 적합성을 확인하였다. 유전자 알고리즘과 다층형 RAS의 전자파 반사/투과 이론을 적용하여 그 복합재료로 이루어진 RAS에 대한 최적설계를 수행하였다. RAS의 제작을 통해 복합재료의 층당 두께가 층수와 MWNT의 함량에 따라 변함을 확인하였다. 이를 고려한 제작 공정을 제안하고 적용하여 설계된 RAS를 제작하였고, 그것의 반사손실의 예측치와 실험치가 잘 일치함을 확인하였다. The object of this study is to design radar absorbing structures(RAS) with load-bearing ability in X-band. Glass/Epoxy plain-weave composites of excellent specific stiffness and strength, containing multi-walled carbon nanotubes(MWNT) added to induce dielectric loss were fabricated. The observation of microstructure and the permittivity of the composites confirmed that the materials are suitable to be used for radar absorbing material. Genetic algorithm and theory for reflection/transmission of electromagnetic waves in a multi-layered RAS were applied to conduct an optimal design of a RAS composed of the developed composites. We observed that the thickness per ply changes with the number of ply and MWNT contents. The fabrication process was proposed considering the problem and applied to fabricate a designed RAS and the theoretical and measured reflection loss of the RAS were also found in good agreement.
새로운 주파수 선택 표면: 주파수 선택적인 직물 복합 재료
이상의,김천곤,Lee, Sang-Eui,Kim, Chun-Gon 한국전자파학회 2006 한국전자파학회논문지 Vol.17 No.10
Fiber-reinforced composites transmitting microwaves of certain frequencies or bands were proposed. These frequency selective fabric composites(FSFCs) are fabricated by weaving carbon fibers and dielectric fibers that build periodic patterns. Design parameters affecting the electromagnetic characteristics of FSFCs were widely discussed, Then the electromagnetic characteristics of a fabricated plain-weave FSEC were investigated with regard to the electrical conductivities of carbon roving, the fiber undulation, and the aperture-to-cell ratio, for the electrical conductivities, its dependence on frequency as well as on the fiber volume fraction of carbon roving was taken into account. Constituent material properties and the fiber undulation had little effect on the EM properties of the fabricated FSFC, while the aperture-to-cell ratio made a profound effect on them. 전자파를 선택적으로 투과시킬 수 있는 섬유 강화 복합 재료를 제안하였다. 이 주파수 선택적인 직물 복합재료는 탄소 섬유와 유전 섬유를 직조하여 주기적인 패턴을 가지도록 제작된다. 먼저 주파수 선택적인 직물형 복합 재료의 전자기적 특성을 조절할 수 있는 설계인자들에 대해 살펴보고, 이후에 정사각형 패턴을 가지는 평직 복합 재료를 제작하고 이것의 전자기적 특성을 탄소 로빙의 전기 전도도, 섬유의 굴곡, 그리고 개구면 대요소 크기의 비에 대해 고찰하였다. 전기 전도도에 있어서는 섬유 체적비와 주파수 분산성에 대한 의존성을 고려하였다. 구성 재료의 물성 및 섬유 체적비는 제작된 FSFC의 전자기적 특성에 큰 영향을 주지 않았으나, 개구면 대 요소 크기의 비는 많은 영향을 주었다.
이상정(Sang-Jeong Lee),박종범(Jong-Beom Park),박노철(No-Cheol Park),이종학(Jong-Hak Lee),김한생(Han-Shang Kim),정의봉(Eui-Bong Jeong) 한국소음진동공학회 2014 한국소음진동공학회 학술대회논문집 Vol.2014 No.10
Unlike ordinary vehicle chassis frame, chassis frame of military vehicle is long and that is operated in harsh driving environment in middle of war. Thus, because large dynamic loads is acting on the frame, it is important to secure the durability of the frame based on the structural dynamic characteristic analysis. The purpose of the study is that the chassis frame is optimized to secure durability of the chassis frame of the military vehicle according to the structural dynamic characteristic analysis. Also, structure optimization are performed using parametric optimization and topology optimization methods.