http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이건창(Gun Chang Lee) 밴쿠버기독교세계관대학원 1991 통합연구 Vol.4 No.2
오늘날 그리스도인이건 아니건 간에 가난을 좋아하는 사람은 별로 없는 것이 현실이다. 가난은 중세기에 있어서 수도원을 중심으로 근면과 청렴이라는 종교의 미덕으로 승화되기도 했으나 20세기에 들어오면서 인간의 이기심에 그 동인을 두는 자본주의가 크게 대두되면서 어느덧 반드시 극복되어져야 할 대상으로 우리들 마음속에 자리잡게 되었다. 그러나 이러한 사고방식은 우리 그리스도인들이 이 땅에 사는 동안 참다운 기독교 경제원리를 실천하면서 살아가는데 오히려 심각한 걸림돌이 되어 하나님께 온전한 예배를 드리는데 실패하게끔 만드는 주요 요인이 된다. 본 연구에서는 이러한 문제의식 하에 성서적인 가난의 개념과 그리스도인이 지켜야 할 경제원리에 대해 고찰한 후 이를 온전한 예배의 회복이라는 관점에서 조망할 수 있는 패러다임을 제시하고자 한다. A great number of people, regardless of Christian or non-Christian, do not want to be poor even for religious reasons. Poverty has once been regarded as one of religious virtues in the name of diligence or integrity. As a capitalism based on human`s selfishness flourishes in 20th century, however, poverty becomes a first-ranked target to be overcome in our mind, which leads to a critical obstacle to Christian life struggling for God`s glory in his economic way of living. Most of all, this kind of distorted concept about poverty helps prevent the true worshipers from worshiping the Father in spirit and truth. considering this problem, this study presents a conceptual framework for overviewing the poverty and Christian economic principles from the viewpoint of recovering the true worship.
이미지 상관 기법을 이용한 풍력 발전 블레이드용 복합재료의 기공 결함 검출능
김종일(Jong Il Kim),허용학(Yong Hak Huh),이건창(Gun Chang Lee) 대한기계학회 2013 大韓機械學會論文集A Vol.37 No.10
풍력 발전 블레이드의 제조 및 운영 중에 발생하는 결함들은 블레이드의 수명과 안전성에 큰 영향을 미친다. 일반적으로 블레이드의 제조 과정에서는 박리, 기공, 주름, 모재 균열 등과 같은 결함이 발생한다. 본 연구에서는 이미지 상관 기법을 이용하여 변형률 분포를 확인함으로써 블레이드의 제조 과정에서 주로 나타나는 결함 중 하나인 기공 결함의 검출능을 조사하였다. 0°/±45°의 섬유 방향을 가진 4 Ply 로 적층된 GFRP 복합재 시험편에 인공적인 기공 결함을 삽입하여 기공의 크기 및 위치에 따른 검출 의존성을 조사하였다. 기공의 크기는 지름 1, 2, 3 ㎜ 이며, 기공의 위치는 시험편 표면으로부터 0.5, 1.0, 1.5 ㎜ 깊이에 삽입하였다. 부하된 시험 하중은 최대 200 ㎫ 이며, 이미지 상관 기법을 통해 변형률 분포를 획득하여 지름 2, 3 ㎜ 의 기공과 깊이 0.5, 1.0 ㎜ 의 기공 결함을 검출할 수 있었다. Defects that occur during the manufacturing process or operation of a wind turbine blade have a great influence on its life and safety. Typically, defects such as delamination, pore, wrinkle and matrix crack are found in a blade. In this study, the detectability of the pores, a type of defect that frequently occur during manufacturing, was examined from the full field strain distribution determined with the image correlation technique. Pore defects were artificially introduced in four-ply laminated GFRP composites with 0°/±45° fiber direction. The artificial pores were introduced in consideration of their size and location. Three different-sized pores with diameter of 1, 2 and 3 ㎜ were located on the top and bottom surface and embedded. By applying static loads of 0-200 ㎫, the strain distributions over the specimen with the pore defects were determined using image correlation technique. It was found the pores with diameter exceeding 2 ㎜ can be detected in diameter.
풍력 발전 블레이드 복합재 GFRP의 인장 특성의 온도 의존성
허용학(Yong-Hak Huh),김종일(Jong Il Kim),김동진(Dong Jin Kim),이건창(Gun Chang Lee) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.4-2
본 연구에서는 풍력 발전 블레이드용 재료인 GFRP(Glass fiber-Reinforced Plastic) 복합재의 인장특성의 온도에 따른 의존성을 고찰하였다. 섬 유 방향이 0° 와 0/± 45°로 적층된 두 종류의 복합재로 제작된 인장 시험편으로부터 인장 강도와 탄성계수 그리고 포아송비에 대한 특성을 상온, -30℃, -50℃ 그리고 60℃에서 측정하였다. 인장 시험으로부터 섬유방향이 축방향으로 적층된 복합재의 인장강도와 탄성계수는 섬유 적층 방향의 의존성을 보였고 단축으로적층된 복합재의 강도 및 탄성 계수가 상대적으로 우수함을 보았다. 그리고 시험온도의 의존성도 확인할 수 있었으며, 포아송비는 온도의 영향이 크지 않음을 확인할 수 있었다. In this study, dependency of the tensile properties for wind turbine blade material, GFRP(Glass Fiber Reinforced plastic), on the testing temperature was examined. With the tensile specimen manufactured from the uniaxial (0°) and triaxial (0/± 45°) laminate composite plates, tensile strength, elastic modulus and Poisson’s ratio for these material were measured at the four different testing temperatures o f room temperature, -30°C, -50℃ and 60℃. It was found that tensile strengths and elastic moduli for the uniaxial laminates were greater than those for triaxial laminates over the testing temperature range. Tensile strength for two laminates was significantly dependent on the testing temperature, while dependency of the elastic modulus on the temperature was insignificant. Furthermore, it could be said that the Poisson’s ratio was not nearly the same with the change of the testing temperature.
영상 상관 기법을 이용한 풍력 발전 블레이드용 복합재료의 기공 결함 검출능
김종일(Jong-Il Kim),허용학(Yong-Hak Huh),김동진(Dong-Jin Kim),이건창(Gun-Chang Lee) 대한기계학회 2012 대한기계학회 춘추학술대회 Vol.2012 No.11
Defects, which can occur in the manufacturing process or during operation of the wind turbine blade, have a great influence on its life and safety. Typically, defects like delamination, pore, wrinkle and matrix crack are found in the blade. In this study, detectability of the pore, one of the defects frequently presented in manufacturing process of the blade, was examined from the full field strain distribution determined with the image correlation technique. Pore defect was artificially introduced in the four-ply laminated GFRP composites with 0°/±45° fiber direction. The artificial pores were made with the consideration of size and location. Three different sized pores with diameter of 1, 2 and 3 ㎜ were located on the top and bottom surface and embedded. With applying static loads ranged from 0 to 5 kN, strain distributions over the specimen with the pore defects were determined using image correlation technique. It was found the pores with diameter of more than 2 ㎜ can be detected in diameter.
풍력 발전 블레이드 복합재 GFRP 의 인장 특성의 온도 의존성
허용학(Yong-Hak Huh),김종일(Jong Il Kim),김동진(Dong Jin Kim),이건창(Gun Chang Lee) 대한기계학회 2012 大韓機械學會論文集A Vol.36 No.9
본 연구에서는 풍력 발전 블레이드용 재료인 GFRP(Glass fiber-Reinforced Plastic) 복합재의 인장특성의 온도에 따른 의존성을 고찰하였다. 섬유 방향이 0o 와 0/±45o 로 적층된 두 종류의 복합재로 제작된 인장 시험편으로부터 인장 강도와 탄성계수 그리고 푸아송비에 대한 특성을 상온, -30℃, -50℃ 그리고 60℃에서 측정하였다. 인장 시험으로부터 섬유방향이 축방향으로 적층된 복합재의 인장강도와 탄성 계수는 섬유 적층 방향의 의존성을 보였고 단축으로 적층된 복합재의 강도 및 탄성 계수가 상대적으로 우수함을 보았다. 그리고 시험온도의 의존성도 확인할 수 있었으며, 푸아송비는 온도의 영향이 크지 않음을 확인할 수 있었다. In this study, the temperature-dependency of the tensile properties of a glass fiber reinforced plastic (GFRP) used in wind turbine blades was examined. The tensile strength, elastic modulus, and Poisson’s ratio of the tensile specimen manufactured from uniaxial (0°) and triaxial (0/±45°) laminate composite plates were measured at four different testing temperatures?room temperature, -30°C, -50°C, and 60°C. It was found that the tensile strengths and elastic moduli of the uniaxial laminates were greater than those of the triaxial laminates over the testing temperature range. The tensile strength of the two laminates was significantly dependent on the testing temperature, while the dependency of the elastic modulus on the temperature was insignificant. Furthermore, it could be considered that the Poisson’s ratio changed slightly with a change in the testing temperature.